How to go to the settings of the router Xiaomi Mi Router 4: all ways and solutions to problems

Xiaomi Mi Router 4 is a popular home networking device, but many users have difficulty logging in to its web interface first. Without access to the control panel, you can’t configure Wi-Fi, change your password, or update your firmware. In this article, we’ll look at all the current ways to log in to the router, including standard and alternative methods, and solve typical problems that prevent you from connecting.

It is important to understand that the login process may differ depending on the firmware version (MIWIFI Or OpenWRT, a type of connection (over cable or Wi-Fi) and even a device model. 4A Xiaomi Mi Router 4C They have similar settings, but different IP-We'll focus on the base model of the Mi Router 4, but we'll give you a general-purpose solution that works for other versions as well.

If you’ve never checked your router’s settings before, don’t worry: it takes no more than 5 minutes with the right approach, but follow the instructions and avoid missing important steps, such as checking your network connection or resetting to factory settings in case of errors.

1.Preparation for the entrance: what to check before the start

Before you try to access a router, make sure that the basic conditions are met. IP-Address and login won't help.

• 🔌 Physical connection: The router must be plugged in and the power indicator must be kept on steady (without blinking). LAN-port (preferably) or Wi-Fi. For the first input, it is better to use a cable - this eliminates problems with the wireless network.
• 🌐 PC network settings: On a computer or smartphone, the Receiving function should be enabled IP automatically (DHCP). If you have previously manually prescribed static IP, reset the settings.
• 🔒 Absence VPN/Proxies: Disable all programs that change IP-address (e.g. NordVPN, ProtonVPN or built-in browser proxies) They can block access to the local network.

Pay special attention to the type of connection. If you use Wi-Fi, make sure that you are connected to the network of the Xiaomi router, and not to the repeating device (for example, to a Mesh system or other router). IP-The control panel address will be different.

💡

If you have Xiaomi Mi Router 4 with OpenWRT firmware, the standard IP-You can try to type 192.168.1.1 or 192.168.31.1 manually.

2. Standard method of entering through the browser

The most common method is to use a web interface.

1. Open any browser (Chrome, Firefox, Edge, or even Safari on a Mac) and avoid outdated versions like Internet Explorer, which may not support modern protocols.
2. In the address bar, enter one of IP-address: 🔹 192.168.31.1 – the main address for most Xiaomi routers. 🔹 miwifi.com – alternative domain (works if not changed) DNS-setting). 🔹 192.168.1.1 - Backup version for some firmware.

Enter

If the page does not load, check:

• 🔄 Correctness of the entered address (frequent error - typos or extra characters).
• 📡 Connection to the router (indicator) LAN-port must burn).
• 🛡️ Firewall or antivirus (temporary shutdown may help).

Is the router connected to power?

Is the network indicator on the router on fire?

Is it the right one? IP-browser?

Are VPN/proxy devices disabled?

-->

3. default login and password for Xiaomi Mi Router 4

After input IP-The system will request login data. For Xiaomi Mi Router 4, the following default credentials are used:

If standard data does not work, it is possible to:

• 🔐 Password has been changed before (try to remember or reset settings).
• 🔄 The router uses a link to the Xiaomi account (requires a sign-in via miwifi.com with a linked phone number).
• 🛠️ Installed custom firmware (for example, Padavan), where the username / password may differ.

4. Alternative ways of entering (if the standard one does not work)

If the web interface is not available, try these methods:

Method 1: Mi Wi-Fi application (official)

Download the Mi Wi-Fi app (available for Android and iOS) and it automatically finds the router on the local network and allows you to manage it without entering. IP-It's a good idea if you:

• 📱 You have a smartphone with access to the router network.
• 🔗 The router is linked to a Xiaomi account (authentication required).
• 🔄 Web interface blocked or unavailable.

Method 2: SSH connection (for power users)

If you have OpenWRT firmware or custom, you can connect via SSH:

1. Install PuTTY (Windows) or use Terminal (Mac/Linux).
2. Enter the command: ssh root@192.168.31.1
3. When requesting a password, enter admin or leave the field blank.

This method requires command line knowledge and is not recommended for beginners.

Method 3: Direct connection to the port (for recovery)

In extreme cases (for example, if the router does not respond to ping), you can use emergency mode:

• 🔌 Connect the router to the PC through LAN-port.
• 🖥️ Set up on PC static IP: 192.168.1.2 with mask 255.255.255.0.
• 🔄 Hold the Reset button for 30 seconds to go into recovery mode.
• 🌐 Try to enter at 192.168.1.1.

Through the browser (192.168.31.1)

Through the Mi Wi-Fi app

SSH (for OpenWRT firmware)

Another way.-->

5. Common mistakes and their solutions

Even with the right actions, there can be problems.

⚠️ Note: If the router does not issue after resetting IP-address (DHCP It's not working, check if the PC is running Public Network mode in the network adapter settings".

If the router gives an error "Device is not linked to an account", it means that the remote control function was previously activated via Mi Cloud.

1. Open the Mi Wi-Fi app.
2. Sign in with the same Xiaomi account that was used in the setup.
3. Go to the Devices section and select your router.

6. Set up the router after the first login

Once you've logged in, you'll be on the main menu. Here's what you should do first:

• 🔒 Change the Administrator Password: Go to Settings → Device control → Password and set a new one.
• 📶 Wi-Fi settings: Network name (SSID): Choose a unique one, no personal data. Password: minimum 8 characters, with numbers and letters. Channel: if the network is slowing, try manual selection (for example, 6 or 11 for 2.4 GHz).
• 🔄 Update of firmware: In the System section → Update the software check the relevance of the version.

It is critical to disable remote access if you do not plan to control your router over the Internet, to do this, go to Settings → Remote Management and deactivate the option, which will protect the device from potential attacks from outside.

💡

Always change the standard administrator password after the first login, which prevents unauthorized access to the router settings.

7. Resetting to factory settings (if nothing helps)

If you've exhausted all options, you'll have a hard reset, which will return the router to its original state, but it will delete all settings, including:

• 📡 Wi-Fi name and password.
• 🔐 Administrator password.
• 🔗 Linking to Xiaomi account.
• 📊 Parental control, guest network, etc.

Resetting instructions:

1. Find the Reset button on the back of the router (can be signed as WPS/Reset).
2. Take a paper clip or toothpick, press and hold the button for 10-15 seconds until the indicators start flashing quickly.
3. Release the button and wait for the reboot (1-2 minutes).
4. Connect to the router network (the name will be standard, for example, Xiaomi_XXXX) and enter the control panel at the address 192.168.31.1.

⚠️ Note: On some OpenWRT firmware, resetting through the Reset button may not work. TFTP-server UART-Port (only for experienced users).

FAQ: Answers to Frequent Questions