Xiaomi Redmi Note 7 remains one of the most popular budget smartphones even 5 years after its release. However, the fragile glass of the screen is its weak point: one fall on the asphalt, and the display appears cracks, chips or βwebβ. In this article, we will discuss how much it costs to replace the glass on the Redmi Note 7 in 2026, where it is better to repair (in the service center, from a private master or on your own), as well as uncover the pitfalls of cheap spare parts and βgarageβ repairs.
It's important to understand that changing the glass isn't always a replacement for the entire display. In the Redmi Note 7, the screen is made up of three layers: the protective glass (it cracks first), the touchscreen (the touchscreen), and the matrix (the image), if only the top glass is damaged, you can do with a separate replacement β it's cheaper. But if the cracks are deep or the screen doesn't respond to touch, you'll have to change the module as a whole. We'll go through both in detail below.
Repair prices range from 1,200 to 6,500 rubles depending on the type of spare part, region and level of service. We collected current data for Russia, Ukraine, Kazakhstan and Belarus, and analyzed user reviews about the quality of repairs in different workshops. If you plan to repair your phone yourself, there is a step-by-step instruction with nuances that are not in the standard guides.
How much does it cost to replace glass on Xiaomi Redmi Note 7: a comparison of prices 2026
The cost of repair depends on three factors: the type of spare part (original, OEM or analogue), the scope of work (only glass or the entire display module) and the level of service (official center, private workshop or self-repair).
| Type of repair | Type of spare part | Cost (β½) | Cost (β΄/βΈ/BYN) | Repair time |
|---|---|---|---|---|
| Replacement of glass only (without touchscreen) | Analogue (Chinese) | 1 200β2 500 | 400β850 / 7 000β15 000 / 40β85 | 1-2 hours |
| Replacement of glass only | OEM (Quality as Original) | 2 800β4 000 | 950β1 350 / 18 000β26 000 / 95β135 | 1.5-hours--3 hours |
| Replacement of the entire display module | Analogue (with matrix) | 3 500β5 000 | 1 200β1 700 / 23 000β33 000 / 120β170 | 1-2 days |
| Replacement of the entire display module | Original (Xiaomi) | 5 500β6 500 | 1 900β2 200 / 36 000β43 000 / 190β220 | 2-4 days |
β οΈ Note: Prices are not included in the table, but in service centers, they charge an additional 800-1 500 for glass replacement. β½, a for the replacement of the entire module - 1,500-2,500 β½. Private masters can offer cheaper (from 500) β½ work, but the risk of poor repairs is higher.
If you see offers to replace glass Redmi Note 7 cheaper than $ 1,000 β½ β It's a good idea to be wary, and you'll probably get a low-quality version that lasts a couple of months, and you'll be looking at the average prices in the region and you'll read the workshop reviews.
Original vs. analogue: which glass to choose for Redmi Note 7
The big question when replacing glass is which part to install. There are three options: original glass from Xiaomi, OEM (original equipment manufacturer) and cheap ones. Let's take a look at the pros and cons of each.
- πΉ Original glass (Xiaomi): Guaranteed quality, perfect fit, retaining all screen features (including oleophobic coating). Cons: high price and long delivery time (if ordered directly).
- πΉ OEM-Parts: Made in the same factories as the originals, but sold without the brand, almost identical quality, 20 to 30 percent lower price, better price/reliability.
- πΉ Analogues (Chinese/Korean): Cheaper by 2-3 times, but the risks are high: poor touchscreen sensitivity, rapid scratching, glue detachment. Suitable only for a temporary solution.
π‘ If the budget allows, choose. OEM-It's pretty much the same as the original, but it's cheaper. UV-glue in the kit is a sign of a quality spare part.
β οΈ Attention: Some workshops offer "universal" glass that is suitable for several Xiaomi models, which often do not fit well in the case, causing gaps and getting dust. Always make sure that the glass is designed specifically for the Redmi Note 7 (model code: M1901F7G).
How to distinguish the original glass from a fake?
Where is cheaper to replace glass: service center, workshop or independently
The choice of the repair site depends on your budget, skills and willingness to take risks. DIY-repair.
1. Official Xiaomi Service Center
Pros: warranty for work (usually 6 months), original spare parts, professional equipment. Cons: the highest price and long repair time (up to 5-7 days).
Cost of glass replacement in official service: 4,500-6,500 β½ (If the phone is warranty, but the screen crashed because of you, repairs will be paid.
Private workshops
Prices are 20 to 40 percent lower than in the official centers. A good craftsman will do the work for 2,500 to 4,000. β½ (There are risks, however:
- π§ Use of low-quality spare parts.
- π§ No guarantee or a period of less than 3 months.
- π§ Damage to other components (e.g., camera plume) during disassembly.
π‘ How to choose a reliable workshop? Look for reviews on Yandex.Maps or 2GIS, ask for photos of completed works, specify what glue is used (optimal β UV-glue B-7000).
3. Self-substitution
If you've got experience with disassembling phones, you can save money and change the glass yourself. It costs between 1,200 and 2,500 parts. β½, a tools (suction cups, mediators, hair dryer) β another 500-1000 β½ (If you buy a new set).
β οΈ Warning: Without experience, you are at risk:
- π₯ Overheat and damage the battery (when using a hair dryer).
- π₯ Break the plumes of the touchscreen or display.
- π₯ Leave dust or air bubbles under the glass.
Screen-take-down suction cups|Plastic mediators (2-3 pcs.)|Fryer (power of at least 1500 W)|UV-glue B-7000|Scalpel or knife to remove old glue|Antistatic bracelet (optional)
-->
Step-by-step: how to replace glass on Redmi Note 7 with your own hands
If you decide to repair yourself, follow this instruction: working time: 1.5-2 hours (for beginners - up to 3 hours).
Step 1: Preparing tools and workplace
You'll need:
- π οΈ Set for disassembling smartphones (suction cups, mediators, screwdrivers).
- π₯ Hair dryer (construction or household with blowing mode).
- π§΄ Clay. UV or B-7000 (The last one is cheaper but dries longer).
- π§» Lilaless wipes and alcohol for cleaning.
π‘ Tip: Work on a clean desk with good lighting. Put a soft substrate under your phone (like a silicone mat) to avoid scratching the body.
Step 2: Removing Old Glass
Carefully warm the edges of the screen with a hair dryer (60-80 Β° C) for 2-3 minutes.
- Suction the glass and pull it up.
- Insert the mediator into the resulting gap and slowly lead them around the perimeter, separating the glass from the body.
- If the glass doesn't lend itself, warm it up again.
β οΈ Warning: Don't push too hard - you can damage the plumes under the screen! If the glass has split into many pieces, use tape to carefully remove them.
Step 3: Cleaning and Installation of New Glass
After removing the old glass:
- Remove the glue residues from the phone frame with alcohol and a napkin.
- Apply a new glue to the frame (if you use it) UV-glue, thin enough).
- Apply the new glass carefully, align it and press it.
- If you glue UV, light up the screen with a UV llama (1-2 minutes); if you use a B-7000, leave the phone pressed for 4-6 hours.
π‘
Before gluing, check the touchscreen, connect the phone to the charger, and make sure the screen responds to touch, and if it doesn't, there's a problem with the plume or the matrix, and changing the glass won't help.
Frequent mistakes when replacing glass and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to re-repair, and here are the most common problems and ways to prevent them:
- π΄ Bubble under glass: Occur from poor cleaning or improper application of glue.Solution: Use UV-glue and warm up the screen after installation.
- π΄ Poor touchscreen sensitivity: Often occurs with cheap analogues. Solution: Buy only OEM-spare parts or originals.
- π΄ Glass detachment after a week: It's a weak glue or moisture. Solution: Use it. B-7000 or UV-Glue and let the phone dry for 24 hours.
- π΄ Scratches on new glass: Low-quality oleophobic coatings wear off quickly.Solution: Apply protective film immediately after repair.
π‘ Useful life hack: If after changing the glass, the screen becomes less bright or there are swellings, check if there is any dust under the glass. To do this, point the flashlight at the screen at an angle - you will see the contamination. If necessary, reglaze the glass.
π‘
If you've changed the glass, you've probably damaged the battery plume or the display. Don't try to fix it yourself.
Should you repair the Redmi Note 7 or buy a new phone?
Xiaomi Redmi Note 7 was released in 2019, and in 2026 it can be considered obsolete. But should you invest in repairs or buy a new smartphone?
When repairs are justified:
- β The phone is fully functional (except glass) and copes with your tasks.
- β You donβt plan to buy a new smartphone in the next year.
- β The cost of repairs is less than 30% of the price of a new phone (for example, if the new Redmi costs 15 000). β½, repairs to 4,500 β½ meaningfully).
When is the best time to buy a new phone:
- β In addition to glass, there are other problems (the battery is discharged, the camera is glitching, the system brakes).
- β The cost of repairs exceeds 50% of the price of the new Redmi (for example, glass replacement). + The battery will cost 7,000 β½, The new Redmi Note 12 costs $14,000. β½).
- β You need modern functions: 5G, 90Hz screen, good camera.
π Comparison with new models:
| Model | Price (2026) | Advantages over Note 7 |
|---|---|---|
| Redmi Note 12 | 13 000β15 000 β½ | AMOLED-screen, 5G, fast-charging 33W |
| Poco X5 | 14 000β16 000 β½ | 120Hz screen, stereo speakers, best camera |
| Redmi 12 | 10 000β12 000 β½ | Modern processor, larger battery (5000 mAh) |
π‘ If your Redmi Note 7 is in good condition and is satisfied with performance, glass repair costs 2,000β3,000 β½ If the phone is already "scared" or requires a comprehensive repair, it is better to consider buying a new model.