Xiaomi screen replacement: prices 2026, where cheaper and how not to overpay

How much does it cost to replace the screen on Xiaomi smartphones: we analyze prices, risks and alternatives

Xiaomi's broken screen is one of the most common breakdowns faced by smartphone owners of this brand. Depending on the model, type of damage and the location of repair, the cost of replacing can vary from 2,500 to 25,000 rubles. But how not to overpay, choose a reliable master and avoid counterfeiting? In this article, we will discuss in detail:

- Current prices 2026 for screen replacement for popular models (Redmi Note 12, POCO X5, Mi 13, etc.);

Where is better to repair: in the official service center, at a private master or independently;

How to distinguish the original display from a fake and why it is critical for sensor and color reproduction

Hidden risks: from loss of leakage to problems with Face ID after replacement.

Spoiler: Replacing the screen on flagships (Xiaomi 14, Mix Fold 3) can cost up to 70% of the price of a new phone - sometimes it is more profitable to sell a broken device and buy a used model in good condition.

Xiaomi screen replacement prices in 2026: a comparative table

The cost depends on three key factors: smartphone model, screen type (OLED, AMOLED, IPS) and spare part manufacturer (original, OEM, copy).

⚠️ Note: Prices in the regions may vary by 10-20% upward due to logistics, for example, replacing the screen with the Redmi Note 11 in Krasnoyarsk will cost 1,500–2,000 ₽ more expensive than in Moscow.

Also, keep in mind that the price often does not include:

• 🔧 Diagnosis (500–1,500) ₽);
• 🔄 Replacement of protective glass (if required);
• 🛠️ Restoration of tightness (for waterproof models).

Private workshop vs. official service: where is cheaper and more reliable?

The choice between an authorized service center (ASC) and an informal workshop is always a trade-off between price, quality and warranty, and let's look at the pros and cons of each option.

Official Xiaomi service

Pros:

• ✅ Work and parts warranty (usually 6-12 months);
• ✅ Original displays with factory calibration;
• ✅ Retaining water protection (if the model supports the IP53/IP68).

Cons:

• ❌ Prices are 20-50% higher than those of private owners;
• ❌ Long repair time (from 3 to 10 days);
• ❌ Refusal of warranty if the phone was opened earlier.

Private workshops

Pros:

• ✅ Prices are lower by 30-70% (especially for older models);
• ✅ Quick repairs (often on the day of treatment);
• ✅ Willingness to work with unofficial parts.

Cons:

• ❌ The risk of a fake (especially for the AMOLED-screen);
• ❌ No guarantee of water protection;
• ❌ Possible problems with sensor calibration or True Tone.

💡

For flagships (Xiaomi) 13/14, Mix Fold is better to choose an official service - saves 5 000–10 000 ₽ You don’t have to risk losing the functionality of your camera or fingerprint scanner.

💡 Tip: Before repair, check the workshop for reviews on 2GIS, Yandex.Maps or forums (for example, 4PDA). Pay attention to photos of works and complaints about poor color reproduction or screen flickering after replacement - these are sure signs of low-quality spare parts.

How to save on the replacement screen Xiaomi: 5 working ways

If the budget is limited but the phone is urgent, use these methods to reduce costs without risking the device.

1. Buy screen yourself. On AliExpress or eBay, the original displays for Redmi and POCO They're 20 to 40 percent cheaper than a workshop, and for example, the screen for the Redmi Note 10 Pro will cost 6,000 to 8,000. ₽ 12,000 ₽ service.
2. Use of the OEM-It's not the original, it's not a fake, it's the same manufacturer that Xiaomi has, but it doesn't have a logo, and it's almost identical, and it's 30 or 50 times lower%.
3. Trade with a master. Many private services are willing to lower the price if you bring your screen or agree to a repair without warranty.
4. Promotions and discounts: Official services sometimes offer promotions (e.g. free diagnostics or discounts) 10% Check the news on the website. mi.com/ru/support.
5. Exchange for a used phone. Some workshops take broken smartphones as a credit for the cost of repairs or new devices.

Watch your model’s video demo on YouTube|To determine if Touch will be retained ID/Face ID|Check if there is a tester in the workshop to diagnose the matrix|Ask for work and spare parts warranty-->

⚠️ If you are offered to replace the screen on Xiaomi 12T or POCO F4 GT for 3,000-4,000. ₽, It's almost guaranteed to be a low-quality fake, and these displays have poor color reproduction, uneven lighting, and often fall off after 2-3 months.

Replacing the screen: Is it worth the risk?

Replacing the screen with Xiaomi is technically possible, but it's not for beginners.

• 🔧 Setting screwdrivers (T2, T3, T4, Pentalobe);
• 🔥 Hair dryer or glue heating station;
• 🧲 Suction and mediators for screen separation;
• 📱 New display (original or OEM);
• 🛡️ Glue (e.g., glue, B-7000 or LOCTITE).

📌 The advantages of self-repair:

• ✅ Savings of up to 50-70% (if you don’t ruin your phone);
• ✅ Experience and understanding of smartphone devices;
• ✅ The ability to choose a spare part yourself.

❌ Cons and risks:

• 💥 Damage to plumes or motherboard (frequent error);
• 🚫 Loss of water protection (if applied incorrectly glue);
• 🔄 Problems with sensor calibration (software required to configure);
• ⚡ Risk of short circuit when incorrect connection.

🎥 Recommendation: If you decide to repair yourself, be sure to watch the video disassembly of your model on YouTube. 11T Pro and POCO F3 The process is very different due to different screen mounts.

Frequent screen replacement problems and how to avoid them

Even after a successful replacement, Xiaomi owners may face unpleasant surprises, and here are the most common ones and ways to prevent them:

1. Poor color reproduction or yellowness. 🔹 Reason: Using a cheap screen copy without calibration. 🔹 Solution: Require a Parts Certificate from the Master or ask to check the display on the test stand before installation.
2. The sensor or part of the screen is not working. 🔹 Reason: The plume is damaged or the connector is incorrectly connected. 🔹 Solution: Return to the workshop immediately – if the connection problem is, it will be fixed for free.
3. Loss of water protection (IP53/IP68). 🔹 Cause: Poor quality glue or lack of sealing. 🔹 Solution: Check with the wizard if protection will be restored.
4. Fast battery discharge. 🔹 The reason: New screen consumes more power due to poor optimization. 🔹 Solution: Update your firmware to the latest version or reset your settings.
5. The Face is not working. ID print-scanner. 🔹 Reason: Some models (Xiaomi 13 Pro, Mix 4) have sensors tied to the original screen. 🔹 Solution: Only the official service can reconfigure the system.

💡

If after the replacement, the screen began to flicker at low brightness, most likely, the wizard used a cheap matrix with a poor PWM frequency. It will be difficult to return money, but you can try to calibrate the colors in the settings (Settings → Display → Color mode).

Where to buy a screen to replace: vetted sellers and what to look for

If you're buying a display yourself, it's important to choose a reliable seller and be able to tell the difference between the original and the fake.

🔍 How to distinguish the original screen from a fake:

• 📦 The package must have a serial number and a hologram Xiaomi;
• 🔍 Check the quality of the print on the plumes - the original does not have blurred inscriptions;
• 💡 Light up the screen with a flashlight: copies often show dark spots or uneven backlights;
• 📱 Install test software (such as Screen Test) to check color rendering and sensor.

FAQ: Answers to Frequent Questions About Replacing Xiaomi's Screen