Xiaomi Mi 9 SE — The compact flagship of 2019, which is still popular today for its balanced performance and convenient size, but even with such reliable devices, the screen remains the most vulnerable place: Falls, bumps, or factory failures can cause cracks, broken pixels, or a complete failure of the display, and if you encounter a problem like this, the first question you'll ask is how much it costs to replace the screen and where to do it so you don't have to pay too much for a poor repair.
In this article, we will analyze the current prices for the replacement of the Mi 9 display SE In 2026, compare the cost of official service centers, private workshops and self-repair, and learn how to distinguish the original screen from a fake, what hidden risks are hidden from cheap offers, and what to do if you have problems with the sensor or display after the replacement. We will also discuss the nuances of repairs for models with AMOLED-Displays – They require a special approach.
How much does it cost to replace the screen Xiaomi Mi 9 SE 2026: Price comparisons
The cost of replacing the display depends on three key factors: the type of screen (original, non-original, copy), the repair site (official service, private workshop, self-replacement) and the complexity of work (whether additional repairs are required plumes, glue, frames).
| Screen type | Screen price (₽) | Cost of work (₽) | Totally (₽) | Where do they offer? |
|---|---|---|---|---|
| Original AMOLED (Xiaomi) | 8 500 — 12 000 | 2 500 — 4 000 | 11 000 — 16 000 | Official SCs, Authorized Partners |
| Neo-original (quality copy) | 3 500 — 6 000 | 1 500 — 3 000 | 5 000 — 9 000 | Private workshops, online shops |
| Budget copy (low quality) | 1 800 — 3 000 | 1 000 — 2 000 | 2 800 — 5 000 | Unqualified Masters, AliExpress |
| Self-replacement (screen only) | 3 500 — 7 000 | — | 3 500 — 7 000 | Online parts stores |
Prices in the regions can vary by 10-25% downward, especially in small cities, for example, in Yekaterinburg or Novosibirsk, replacing the original screen will cost 9000-13,000 ₽ (11,000 to 16,000. ₽ It is important to note that cheap offers often hide the pitfalls: the wizard can install the screen without checking the sensor, not replace damaged glue or use poor-quality plumes.
Original vs non-original: which screen to choose for the Mi 9 SE
The big question when replacing the display is whether you should overpay for the original screen or you can do with a high-quality copy.
Original screen (Xiaomi):
- ✅ Perfect color reproduction and brightness (corresponding to factory parameters).
- ✅ Full firmware compatibility (no problem with sensor calibration).
- ✅ Warranty from the service center (usually 3-6 months).
- ❌ High price (from 8,500) ₽ screen-only).
- ❌ Long wait (in some SCs original spare parts are brought to order).
Quality copy (e.g. from BOE or Tianma):
- ✅ Price 2-3 times lower than the original (from 3,500) ₽).
- ✅ Quick replacement (parts are usually available).
- ✅ With proper installation, it will last 1-2 years without complaints.
- ❌ Small differences in color reproduction (colder tones) are possible).
- ❌ Risk of incomplete compatibility with firmware (less often - problems with autobrightness).
Budget copy (no-name):
- ✅ Minimum price (from 1,800) ₽).
- ❌ Poor build quality (possible broken pixels, poor sensor sensitivity).
- ❌ Fast burnout. AMOLED-matrices (after 6-12 months).
- ❌ Frequent display problems (strips, flickering).
💡
If you are interested in the longevity and quality of the image, choose the original or a copy from proven manufacturers (BOE, Tianma Budget screens are only suitable for a temporary solution.
Pay particular attention to the type of matrix. in Mi 9 SE used AMOLED-It's a display that's sensitive to the quality of the installation, and if you're not fitting properly, you can do it:
- 🔴 pixel burnout (if the screen is not calibrated).
- 🔴 Sensor problems (incorrect pressing, "ghost" touching).
- 🔴 Detachment of glue (the appearance of air bubbles under glass).
Where to replace the screen: official service vs private workshop
The choice between an official service center (Xiaomi) and a private workshop depends on your priorities: reliability, speed or price.
Official Xiaomi Service Center:
- ✅ Work and parts warranty (usually 6 months).
- ✅ Only original screens are used.
- ✅ Professional equipment (vacuum presses for gluing).
- ❌ High cost (by 20-30% more expensive than private owners).
- ❌ Long term (3 to 7 days if the screen is customized).
Private workshop:
- ✅ Price is lower by 30-50% (you can negotiate a discount).
- ✅ Quick repairs (often here and now").
- ✅ Option to select a screen (original or copy).
- ❌ The risk of running into an unqualified master.
- ❌ No work guarantee (or minimum - 1 month).
Self-sustaining replacement:
- ✅ Minimum price (only screen price).
- ❌ High risk of damage to plumes or motherboard.
- ❌ Requires a specialized tool (suction cups, mediators, hair dryer).
- ❌ There is no guarantee – all risks are on you.
What happens if the screen is not installed correctly?
If you decide to go to a private workshop, be sure to check:
- 🔍 Reviews on Yandex.Maps or 2GIS (pay attention to the latest comments).
- 📄 Guarantee (must be written in the contract, not in words).
- 🛠️ Equipment (the workshop should have a vacuum press for gluing) AMOLED-screen).
💡
Before repair, ask the wizard to show the screen he will install.The original has Xiaomi factory-marked and a barcode, and quality copies are the manufacturer's logo (e.g., the manufacturer's logo, BOE).
Step-by-step: how to replace the screen Xiaomi Mi 9 SE independently
If you choose to replace yourself, follow this instruction, and we warn you that the process requires care and patience, and that errors can cause your phone to fail completely.
Tools required:
- 🔧 Set of screwdrivers (cross, flat, Pentalobe for Xiaomi screws).
- 🧲 Screen removal suction cups (2 pcs.).
- 🔥 Hair dryer or thermo-air station (for softening glue).
- 📏 Plastic mediators (to separate the case and screen).
- 🧴 New glue, for example, B-7000 or T-7000).
☑️ Preparation for screen replacement
Step-by-step process:
- Remove the old screen. Heat the edges of the phone with a hair dryer for 2-3 minutes. Suction cups gently raise the screen, then insert the mediators into the crevices to separate it from the body. Be careful - the sensor and display plumes are very fragile!
- Turn off the plumes. Untwist the screws that hold the metal plate over the plumes. Carefully disconnect the sensor and display connectors (use a plastic blade).
- Install a new screen. Connect the new screen plumes, fix them with a plate. Apply new glue around the perimeter of the case (thin layer).
- Slake. Carefully apply the screen, making sure it's straight into the slots. For better fixation, use a vacuum press or put the phone under load for 1-2 hours.
💡
If the screen doesn't respond to touch after you've replaced it, check the sensor plume connection, and often the problem is poor contact or damage to the connector.
Frequent errors in self-replacement:
- 🔴 Damage to battery plume (may cause battery to bloat).
- 🔴 Incomplete removal of old glue (this will cause irregularities when installing a new screen).
- 🔴 Overheating of the body (may damage the motherboard).
What if the screen flashes after replacement or stripes appear?
What to do if there are problems after replacing the screen
Even after professional repairs, there may be problems, and we'll look at the most common problems and how to fix them.
1. The sensor is not working or is not working correctly:
- 🔹 Check the connection of the sensor plume (it may not be fully inserted into the connector).
- 🔹 Update your phone’s firmware (sometimes flashing the sensor helps).
- 🔹 If the problem persists, the plume or screen is defective (replacement is required).
2. The screen flashes or artifacts appear:
- 🔹 This can be caused by poor contact of the display plume or damage to it.
- 🔹 Check if the sleeve is not bent during installation.
- 🔹 If the blinking continues, the screen is faulty (especially for cheap copies).
The screen shall not be switched on after replacement:
- 🔹 Check the battery connection (it may have shut down during repairs).
- 🔹 Make sure all the cables are connected correctly.
- 🔹 If the phone does not respond to charging - the power controller could burn (diagnosis is required).
💡
If the phone starts to run out quickly after changing the screen, check if the battery plume is damaged, and the cause may also be poor-quality glue that interferes with normal cooling.
4.The colors on the screen are different from the original:
- 🔹 This is normal for non-original screens (especially budget screens).
- 🔹 Try calibrating the colors in the settings (Settings) → Screen. → Color mode).
- 🔹 If the shades are too cold/warm – the screen is of poor quality, replace it.
⚠️ Warning: If your phone starts to overheat or discharge quickly after changing the screen, contact the workshop immediately.This could be a sign of damage to the motherboard or battery.
How much does it cost to replace the screen with additional work?
Sometimes, replacing the display requires more work, which increases the total cost. Let's look at the most common cases.
| Additional work | Cost (₽) | When required |
|---|---|---|
| Replacement of sensor plume | 1 500 — 2 500 | If the sensor is not working after installing a new screen |
| Replacement of the display plume | 1 200 — 2 000 | If the wires are damaged or broken |
| Battery replacement | 2 000 — 3 500 | If the battery is damaged during repair or it is swelling |
| Replacement of the rear window | 3 000 — 5 000 | If the screen is broken, the back window is broken. |
| Diagnosis of the motherboard | 1 000 — 2 000 | If the phone is not switched on after replacement |
For example, if you damaged the sensor plume and battery when you replace yourself, the total cost of repairs in the workshop can grow to 15,000–20,000. ₽ (Instead of the original 5,000 to 7,000 ₽ So before you repair, evaluate your skills and risks.
⚠️ If the master offers to replace the screen for 2000-3000 ₽ "It's probably using the cheapest Chinese version without a warranty, and it's going to last for months.
Where to buy a screen for Xiaomi Mi 9 SE: Checked shops and selection tips
If you're going to replace the screen yourself or buy it for a master, it's important to choose a reliable seller, and let's figure out where to buy parts and what to look for.
Checked online stores:
- 🌍 AliExpress is a big choice, but it's a high risk of getting a fake.
- 🛒 Beru (Yandex Market) - there are official suppliers, you can choose with delivery "today".
- 📦 Chipdip – specializes in electronics parts, often having original screens.
- 🔧 Etvet - a store for repairmen, you can find high-quality copies.
What to look for when buying:
- 🔍 Screen Type: Make sure it is AMOLED (not IPS, Which is not suitable for the Mi 9 SE).
- 📋 In the set must be glue, plumes and protective glass (if it is separate).
- 🏷️ Marking: The original has the inscription Xiaomi and barcode, copies - the manufacturer's logo (BOE, Tianma).
- 📅 Warranty: Verified sellers give a guarantee of at least 1 month.
Average screen prices (2026):
- 💰 Original. AMOLED: 8 500 — 12 000 ₽.
- 💰 Quality copy (BOE/Tianma): 3 500 — 6 000 ₽.
- 💰 Budget copy: 1,800 - 3,000 ₽.
💡
Before buying, ask the seller to send a photo of the screen with the marking.Original displays Xiaomi Mi 9 SE have a serial number beginning with MDSS or DSI.