A broken screen on the Xiaomi Redmi 9 Pro is one of the most common problems for owners of this smartphone. Falling from a height, hitting a hard surface or even bad pressure in your pocket can lead to cracks, broken pixels or complete sensor failure. But how much does it cost to bring the phone back to life? The prices for replacing the display vary from 2,500 to 8000 rubles, and the difference depends not only on the region, but also on the type of module, workshop and even the time of year.
In this article, we will look at all the repair options, from official Xiaomi services to private workshops and self-replacement, you will learn what pitfalls lurk behind low prices, how to distinguish the original screen from a copy, and why it is sometimes cheaper to buy a used phone than to fix an old one, and also a list of proven services in Moscow, St. Petersburg and the regions with current rates for 2026.
Private workshops vs. official service: where is cheaper and more reliable?
The first question that arises from the owner of the Redmi 9 Pro with a broken screen: contact an authorized service center Xiaomi or look for a private workshop? Each option has pros and cons, and the choice depends not only on the budget, but also on how important you are warranty and original parts.
Official services Xiaomi in Russia work according to the standards of the manufacturer.
- ✅ Original parts with a guarantee of up to 6 months
- ✅ Diagnosis before repair (sometimes free)
- ✅ Preservation of factory tightness (important for moisture protection)
- ❌ Prices are 30-50% higher than in private workshops
- ❌ Lines and longer repairs (from 2 to 5 days)
Private workshops, especially those specializing in Xiaomi, often offer more favorable terms:
- ✅ Prices are lower by 20-30% due to the use of non-original, but high-quality modules
- ✅ Quick repair (often in 1-2 hours)
- ✅ Flexible approach (you can negotiate a discount or install your screen)
- ❌ The risk of running into poor quality parts or unscrupulous masters
- ❌ The warranty usually does not exceed 3 months.
There is a third option, which is a standalone replacement, and if you have experience with electronics, you can buy a screen on AliExpress or in Russian stores (for example, Beru or M. Video) and change it yourself.
⚠️ Warning: If you replace yourself, you lose your phone warranty (if it's still valid) and risk damaging plumes or boards if you unscrupulously dismantle it. Without a special tool (suction cup, mediator, hair dryer), it's almost impossible to remove the screen without damage.
How much does it cost to replace the screen on the Redmi 9 Pro in 2026: the price table
Repair prices depend on the type of screen, region and status of the workshop. Below is the current table with prices for June 2026 for different cities in Russia. Note that in the capital services, the cost can be higher by 10-15% due to rent and salaries of masters.
| Screen type | Moscow and MO | St. Petersburg | Regions (major cities) | Regions (small towns) |
|---|---|---|---|---|
| The original (Xiaomi) | 6 500–8 000 ₽ | 6 000–7 500 ₽ | 5 500–7 000 ₽ | 5 000–6 500 ₽ |
| Original (post-warranty) | 5 500–6 500 ₽ | 5 000–6 000 ₽ | 4 500–5 500 ₽ | 4 000–5 000 ₽ |
| Quality copy (A+) | 4 000–5 000 ₽ | 3 800–4 500 ₽ | 3 500–4 200 ₽ | 3 000–3 800 ₽ |
| Budget copy (A) | 2 500–3 500 ₽ | 2 300–3 200 ₽ | 2 000–3 000 ₽ | 1 800–2 800 ₽ |
| Self-replacement (part) + tool) | 2 000–3 000 ₽ | 1 800–2 800 ₽ | 1 500–2 500 ₽ | 1 300–2 200 ₽ |
It is important to understand that cheap screen copies (categories A or B) often have problems with:
- 🔹 Poor color reproduction (yellowish or bluish shade)
- 🔹 Low Sensitivity of the Sensor (Missing touches)
- 🔹 Fast burnout of backlight (after 6-12 months)
- 🔹 Lack of oleophobic coating (fingers stick to screen)
💡
The best option for the ratio of price / quality – screen category A+. It is 90% repeat the original, but costs 1.5-2 times cheaper.
How to save money on screen replacement: 5 working ways
If you have a budget but need a phone urgently, you can try to save money without compromising quality.
- Buy the screen yourself. Many workshops agree to install a customer-bought spare part for a nominal fee (500-1000). ₽). So you avoid the markup on the part: 🛒 AliExpress (shops with a rating above 98%) 🛒 Beru or Ozon (official sellers) 🛒 Local groups in VKontakte or Telegram (for example, "Spare parts for Xiaomi Moscow")
Look for stocks.
"Speakable Service"
Coupon
Biglion
Exchange the old screen for a discount.
Renovate in low season.
Check the warranty.
💡
Before buying a screen on AliExpress, be sure to check with the seller whether the module is suitable for the Redmi 9 Pro (model). M2007J3SC). There are many general-purpose displays that are not compatible with this version.
Another way to save money is to buy a used phone in good condition, like on Avito or Yula you can find a Redmi 9 Pro with a desktop screen for 6,000 to 8,000. ₽, It's comparable to the cost of repairs:
- 🔍 Check in IMEI Original (via imei.info)
- 🔋 Test the battery (must hold a charge of at least 80% of the factory capacity)
- 📱 Make sure your phone is not blacklisted (locked by the operator)
How to distinguish the original screen from a fake: 7 signs
One of the biggest problems with replacing the screen with the Redmi 9 Pro is the abundance of fakes, and even in official services, sometimes you install non-original modules, passing them off as branded ones.
- Color rendering. The original screen has neutral colors with temperature. ~6 500K. Copies often give a cold (bluish) or warm (yellowish) hue.
- The original has a maximum brightness of 450 nits, and copies rarely exceed 350-400 nits (checked in settings or by the Lux Light Meter app).
- The oleophobic coating. The original screen has fingers that slide easily, and there are greasy marks on the copy.
- Sensitivity. Do a test on touchscreen-test.com. The original doesn't miss a touch, copies can be "glutched" at the edges.
- Backlight. Turn on the white background at maximum brightness in a dark room. The copies often show uneven spots or "clouds."
- The original plume is labeled Xiaomi or Tianma (the maker of displays for the Redmi 9 Pro).
- Response time. The original screen has a response time of 60 Hz. Copies can "brake" when scrolling (checked in Settings). → The phone. → Version. MIUI, Tap 5 times on the "core").
How to check the plume without disassembling the phone?
If you find at least 2-3 signs of counterfeiting, it is better to return the screen to the seller or require a replacement in the service.
⚠️ Warning: Some unscrupulous workshops deliberately install cheap copies, passing them off as originals. To avoid fraud, demand a check indicating the screen model or film the replacement process on video.
Step-by-step: how to replace the screen yourself
If you decide to repair yourself, follow this instruction.
- 🔧 Set of screwdrivers (cross, flat, flat, T3–T5)
- 🧲 Screen removal suction cups (2 pcs.)
- 🔥 Hair dryer or thermo-air station (for softening glue)
- 📏 Plastic mediator or guitar mediator
- 🧴 Alcohol or solvent for cleaning glue
- 🔋 New screen module (with or without frame)
Turn off the phone and remove it. SIM-memory-card
Discharge the battery to 20-30% (to avoid fire when heated)
Prepare your workspace (clean desk, good lighting)
Take a picture of the process at each stage
-->
Step 1. Remove the back cover.
Carefully apply the lid to the plastic mediator, starting at the bottom edge. In the Redmi 9 Pro, it is attached to latches and glue. If the lid does not lend itself, heat it slightly with a hair dryer (temperature not higher than 60).°C).
Step 2. Shut down the battery.
Unscrew the screws that hold the battery metal plate, and unplug the battery plume. It's a must! It's dangerous to run a connected battery, and it's a risk of short circuit.
Step 3: Dismantling the old screen.
Heat the screen around the perimeter with a hairdryer (temperature 70–80)°C) for 2-3 minutes, suction cups, lift the display and carefully separate it with a mediator as you walk around the edges!
Step 4: Install a new module.
Move all the parts (speaker, camera, sensors) from the old screen to the new one. Connect the plume and check the performance before final assembly. If the screen doesn't turn on, check the density of the contacts.
Step 5, build the phone.
Apply a new glue (for example, B-7000) And you're going to go around the screen, press it down and lock it with rods for 10 to 15 minutes, and then you're going to put it back together.
What if the screen doesn’t work after replacement?
Frequent Screen Replacement Mistakes and How to Avoid Them
Even experienced craftsmen sometimes make mistakes that lead to additional costs, and here are the most common mistakes and ways to prevent them:
- 🔧 The screen plume in the Redmi 9 Pro is thin and fragile. Never pull it, just gently pull it off the edges. If the plume breaks, it can be replaced separately (cost). ~1 000 ₽).
- 🔥 If you heat the screen with a hairdryer, don't send hot air to the motherboard, which can damage the chips. The optimum temperature for the adhesive is 70-80.°C.
- 💧 Getting glue on the contacts. Excess glue can close the contacts of the plume. Always apply the glue thinly and avoid getting on the connectors.
- 📱 Screen incompatibility. Even if the module looks similar, it may not fit on the connector or firmware. Always check the compatibility with the model (M2007J3SC For the Redmi 9 Pro).
- 🔋 Battery discharge during repairs. If the phone runs out in the process, it may not turn on. Charge the battery to 30% before work begins.
Another common problem is that the sensor is broken after replacement, and this can be caused by:
- Incorrect connection of the plume (check if the connector is turned over).
- Lack of calibration (in some cases, sensor firmware is required).
- Marriage of the screen itself (especially relevant for cheap copies).
💡
If the screen is working after the replacement but the sensor is not responding, try calibrating it through the engineering menu. To do this, dial ##6484## and follow the instructions.
Where to order a screen replacement on Redmi 9 Pro: top services in 2026
The choice of workshop is half the success, and we have compiled a list of proven services in different cities of Russia, where you can replace the screen with a guarantee and without overpayment.+ (copy-in-class).
Moscow and the region:
- 📍 "Communication Service" - from 4,200 ₽, 6 months warranty. Address: service.svyaznoy.ru
- 📍 "TechnoDoctor - from 3,900 ₽, 3 months warranty. Address: techdoctor.ru
- 📍 "Xiaomi repair service (specialized service) – from 4,500 ₽, 1 year guarantee, address: 12 Tverskaya Street.
St. Petersburg:
- 📍 "Fix Price" - from 4,000 ₽, 6 months warranty Address: fix-price-service.ru
- 📍 "Mobile Doctor - from 3,800 ₽, 3 months warranty Address: Nevsky Prospect, 100.
Regions (major cities):
- 📍 "AirRemont" (Yekaterinburg, Novosibirsk, Kazan) - from 3,500 ₽, 3-month guarantee.
- 📍 "Service Center" (Krasnodar, Rostov-on-Don) - from 3700 ₽, 6-month guarantee.
Online ordering of spare parts:
- 🌍 AliExpress - Screen A+ 2,200 ₽ (Delivery 2-3 weeks Recommended sellers: Xiaomi Original Store, Digi-Flagship Store.
- 🌍 Beru - Screen A+ 2,800 ₽ (delivery 3-5 days).
- 🌍 Ozon – Original screen from 5,500 ₽ (quick-delivery).
Before visiting the service, it is necessary to:
- Find out which screen you will install (original or copy).
- Ask about the work warranty and spare parts.
- Check the reviews about the workshop on Yandex.Maps or 2GIS.
- Remove the backup of the data (in case of resetting).