Why broken glass on Xiaomi is not a sentence
Broken glass on a smartphone is one of the most common breakdowns faced by Xiaomi, Redmi and POCO owners. Fortunately, 90% of the time, it's not a critical problem: the phone keeps working and it's cheaper to replace the glass than it is to buy a new device. But the question is: how much will it cost and where is it better to repair it?
Prices for glass replacements range from 1,500 to 15,000 rubles, depending on the model, the type of glass (conventional or 3D-curved), and whether you contact an official service center or a private master, and in this article we will examine all the nuances, from the average prices for popular models to the hidden risks of cheap repairs, which are silent in the workshops.
It's important to understand that changing glass isn't just aesthetics, but cracks can cause sensor damage, moisture to get inside the case, or even detachment. OLED-Matrix (relevant for flagships like Xiaomi 13 Ultra.
What is the cost of replacing glass on Xiaomi
The price comes from a few key factors, and let's take each of them apart so you can get a rough estimate of the budget before you even go to the workshop.
- 📱 Smartphone model. The newer and more expensive the device, the higher the cost of spare parts. For example, glass for the Redmi Note 12 will cost 2-3 times less than for the Xiaomi 14 Pro.
- 🔧 Type of glass. Normal flat glass (2D) cheaper (3D/5D), The latter requires a more complex installation and a special glue.
- 🏢 Xiaomi official centers take 20-50% more expensive than private workshops, but give a guarantee and original spare parts.
- 🛠️ If the touch layer or the display module is affected, the price will increase by 1.5-2 times.
- 📍 In Moscow and St. Petersburg, repairs will cost 15-30% more than in the regions.
Another important thing is the quality of the glass, and workshops often offer three options:
- The original (OEM) is the most expensive, but with a guarantee of full compatibility.
- High quality analogues (for example, from Nillkin or Spigen) are cheaper by 30-40%, but may differ slightly in color reproduction.
- Budget analogue - the risk of bubbles under the glue or poor sensitivity of the sensor.
Average glass replacement prices for popular Xiaomi models (2026)
The price list for Moscow and the regions is below, and prices are for glass replacements only (without sensors and matrixes). If you have a fully broken display (the sensor is not working or there are black spots), the cost of repairs will be higher.
| Smartphone model | Type of glass | Price at the service center (₽) | The price at the private master (₽) |
|---|---|---|---|
| Redmi Note 12 / 12 Pro | 2D | 2 500 – 3 500 | 1 800 – 2 500 |
| POCO X5 / X5 Pro | 2D | 3 000 – 4 000 | 2 200 – 3 000 |
| Xiaomi 13 / 13 Lite | 3D | 6 000 – 8 000 | 4 500 – 6 000 |
| Xiaomi 13 Pro / 13 Ultra | 5D (curved) | 10 000 – 15 000 | 7 000 – 10 000 |
| Redmi 10 / 10A | 2D | 1 500 – 2 500 | 1 200 – 2 000 |
⚠️ Note: If the workshop offers to replace the glass on Xiaomi 13 Ultra cheaper than 7 000 rubles, most likely, you will install a low-quality analog. Such glasses often peel off after 2-3 months or have a poor oleophobic coating (fingers "stick" to the screen).
For models older than 2020 (such as the Redmi Note 9 or POCO F2 Pro), prices are lower by 20 to 30 percent, but finding original glass becomes more difficult, and in some cases, workshops offer versatile glass that is cut to the size of the screen — cheaper, but less reliable.
💡
Replacing glass on flagships (such as the Xiaomi 14) costs more than just the price of the parts, but also because of the complexity of disassembling, often using high-strength adhesives and requiring special equipment to dismantle.
Where to replace glass cheaper: comparison of options
You have three main options where you can change the glass to Xiaomi, and each has its pros and cons, and we'll go through them in detail.
1. Official Xiaomi Service Centers
- ✅ Pros: original spare parts, 6-12 months warranty, professional equipment.
- ❌ Cons: high price, long repair time (3-7 days), often requires a record in advance.
2. Private workshops and service centres
- ✅ Pros: the price is 30-50% lower than in official centers; many do repairs in 1-2 hours.
- ❌ Cons: the risk of running into poor-quality parts; not all give a guarantee.
3. Self-substitution
- ✅ Pros: Minimum cost (only the price of glass) + glue).
- ❌ Cons: high risk of damage to plumes or matrix; experience and special tools (dryer, suckers, mediators) are required).
🔹 Tip: If you choose a private workshop, be sure to check out:
Read reviews on Yandex.Maps or 2GIS (pay attention to the fresh ones, for the last 3 months).
Ask if you have a work guarantee and spare parts (at least 3 months).
Find out what glue is used (optimally - LOCA or UV-glue).
Ask to show the glass before installation (the original must be factory markings).-->
⚠️ Attention: Some workshops practice "hidden markup"; for example, you are told the price of 3,000 rubles for glass, and the check ends with a line "work of the master" for another 2,000.
Can I replace the glass with Xiaomi on my own?
In theory, yes. YouTube is full of video instructions on how to change glass to Redmi or POCO, but in practice, it's one of the most difficult ways to repair smartphones.
- 🔥 The risk of overheating. To separate the glass, you have to heat it with a hair dryer to 80-100.°C. Without experience, it is easy to damage the plumes or battery.
- 🧲 The glue problem, the cheap glue can't bear the load, and the glass will fall off in a week.
- 📱 Dust and debris. When you replace it yourself, it often gets mucuses that you see on the screen.
- ⚡ Loss of leakage. If you seal it wrong, moisture will get inside the case (risk of corrosion of the board).
If you are planning to do a self-repair, here is the minimum set of tools you will need:
- 🛒 Glass (original or qualitative analogue).
- 🔥 Construction dryer (power of at least 1500 W).
- 🧲 Suction cups for glass removal.
- 📏 Mediators (plastic blades).
- 🧴 Clay. LOCA or UV + hardener.
- 🔦 UV lamp (if you use it) UV-glue).
💡 Useful life hack: Before gluing new glass, wipe the display with isopropyl alcohol (90%+) — This will remove fat and provide better grip.
What happens if the glass is not properly applied?
How long does it take to replace the glass?
The repair period depends on the type of workshop and the complexity of the work:
- 🏢 Official service center: 3-7 working days (sometimes up to 10 days if there is no spare part in stock).
- 🔧 Private workshop: 1-3 hours (if glass is available) In rare cases - up to a day.
- 🏠 Independently: 2-5 hours (if you have experience) or a whole day (if for the first time).
⚠️ Warning: Some workshops offer a "express replacement" in 30 minutes, usually meaning they simply stick a protective film or thin glass (called "glass case") over the cracked glass. This is a cheap solution (from 500 rubles), but it does not restore tightness and does not protect against further cracking.
If you urgently need a phone, check in the workshop, whether there is a possibility of temporary repair (for example, seal the cracks with a special composition so that the glass does not crumble), it will cost 300-800 rubles and last 1-2 weeks until full repair.
💡
If you’re renting out a phone for a few days, ask the shop to provide a replacement device for repairs. Many official Xiaomi centers give budget models (such as the Redmi 9A) for free or for a nominal fee (200-500 rubles a day).
Frequent mistakes when replacing glass and how to avoid them
Even in professional workshops, there are sometimes joints. TOP-5 Mistakes that damage the result of repair:
- Use of poor-quality glue. Cheap glue turns yellow over time or loses strength: LOCA (for 3D-glass UV-glue 2D).
- Incomplete removal of old glue. If there are particles of old glue left under the new glass, over time, bubbles or swellings will appear.
- Overheating of the display. When the glass is removed with a hairdryer, it is easy to damage the matrix (broken pixels or yellow appearance) The optimal temperature is 80-90 °C.
- The wrong centering of the glass. If the glass is even 0.5 mm offset, the sensor will not work well at the edges.
- No check after installation. The wizard has to test all the functions: sensor, mapping, sensors (lighting, approximation).
🔹 How to check the quality of work after repair?
Sensor sensitivity (try swiping your finger around the edges of the screen).
Display colors (whether there is yellowness or divorce in bright light).
The approach sensor (during the call, the screen should go out when you bring the phone to your ear).
Tightness (blow on the screen – if you can see the movement of dust under the glass, the repair is poorly done).
No bubbles (look at the screen from an angle in bright light).-->
If you notice any of these problems after changing the glass, you should request a warranty rework. In official Xiaomi service centers, the warranty for such repairs is 6 months, in private workshops - usually 1-3 months.