Replacement of the screen on Xiaomi: prices 2026, where cheaper and how not to overpay

A broken smartphone screen is one of the most common breakdowns faced by Xiaomi owners. Even a minor crack can eventually turn into a broken touchscreen, flicker or complete disabling of the display. In 2026, the cost of replacing the screen on the brand’s devices varies from 1,500 to 15,000 rubles, depending on the model, type of matrix and repair site.

In this article, we will analyze the current prices for replacement displays for popular lines Redmi, Poco and Mi, compare the cost in official services and private workshops, and tell you what hidden costs can arise during repairs.

Spoiler: Replacing the screen with the Xiaomi 13 Pro will cost 3-4 times more than the Redmi Note 12, and in some cases it is cheaper to buy a new phone than to repair the old one.

1.What is the price of a Xiaomi screen replacement?

The cost of repairing the display is formed from several key factors, the main one is the smartphone model. For example, the screen for the flagship Xiaomi 14 Ultra with AMOLED-matrix and refresh rate of 120 Hz will cost many times more than for a budget Redmi A2 with IPS-display.

  • πŸ“± New flagships (Mi, Mix) to repair more expensive than the old models of Redmi 2019-2020.
  • πŸ”§ Type of matrix: AMOLED (in flagships) 2-3 times more expensive IPS (budgetary).
  • πŸ› οΈ Disassembly difficulty: Some models (e.g. Poco) F5) The screen is glued to the frame, which complicates the replacement.
  • πŸ“¦ Original part: the original display from Xiaomi is 30-50% more expensive than the Chinese counterpart.
  • 🏒 Repair site: Official service takes 20-40% more than a private workshop, but gives a guarantee.

Another important aspect is the screen configuration, with some models assembling the touchscreen and frame (called display assembly), while others are separate, such as the Redmi Note 11 Pro, which often sells only touchscreen without a matrix, which is cheaper but requires more complex repairs.

⚠️ If the master offers to replace the screen on Xiaomi cheaper than 1,500 rubles - this is a reason to be wary. Most likely, you will install a low-quality copy that will last for a couple of months.

2. Current screen replacement prices in 2026

Below is a table with average prices for replacement display for popular models Xiaomi, Redmi and Poco. the cost is indicated for work + spare part (original or quality analogue) in Moscow service centers. In the regions, prices can vary by Β± 15-20%.

Smartphone modelScreen typePrice in official service (β‚½)Price in a private workshop (β‚½)
Xiaomi 14 / 14 ProAMOLED, 120Hz12 000 – 15 0009 000 – 12 000
Xiaomi 13T / 13T ProAMOLED, 144Hz10 000 – 13 0007 500 – 10 000
Redmi Note 13 Pro+AMOLED, 120Hz8 000 – 10 0006 000 – 8 000
Poco F5 / F5 ProAMOLED, 120Hz7 000 – 9 0005 000 – 7 000
Redmi Note 12 ProOLED, 120 Hz6 000 – 8 0004 500 – 6 000
Redmi A2 / A2+IPS, 60 Hz.2 500 – 3 5001 500 – 2 500

Note that the prices of Poco and Redmi often coincide, as these lines use similar displays, but the flagship Xiaomi (series 12/13/14) is much more expensive due to premium matrixes with high refresh rates and support for HDR10+.

If your model is not in the table, focus on the type of screen:

- IPS (Budget models – from 1,500 to 4,000 β‚½;

- AMOLED (medium segment: 5,000 to 9,000 β‚½;

- AMOLED 2K/120 Hz (flagships) - from 10 000 β‚½.

πŸ“Š Where do you plan to replace the screen with Xiaomi?
Official Xiaomi service
Private workshop
I will order the spare parts myself.
I haven't decided yet.

3. Official service vs private workshop: where is cheaper and more reliable?

Choosing between a Xiaomi service center and a private workshop is always a trade-off between price, speed and warranties. Let's compare the pros and cons of each option.

πŸ”Ή Official Xiaomi service

  • βœ… Work and parts warranty (usually 6-12 months).
  • βœ… Original displays with factory color calibration.
  • βœ… Diagnosis before repair (sometimes free).
  • ❌ Prices are 20-40% higher than in private workshops.
  • ❌ Long term repair (from 3 days to a week).

πŸ”Ή Private workshop

  • βœ… Prices are lower by 30-50% (especially if you use analogue parts).
  • βœ… Quick repairs (often in 1-2 hours).
  • βœ… Opportunity to negotiate a discount or free diagnosis.
  • ❌ The risk of running into poor quality parts or unqualified craftsmen.
  • ❌ The guarantee is not always given (or only for work, but not for spare parts).

If your smartphone is warranty, be sure to contact the official service - self-repair will void the warranty. For models older than 2 years, a private workshop may be more profitable, but only if you are confident in its reputation.

πŸ’‘

Before repair, check the reviews about the workshop on Yandex.Maps or 2GIS. Pay attention to the before/after photos - they will help to assess the quality of work.

4 Hidden expenses: what else can the money be taken for?

Many Xiaomi owners face a situation where the total amount for a screen replacement is higher than the initial announced, due to additional work or defects that are detected during the repair process.

  • πŸ”‹ Battery replacement: If the master finds a bloated battery during disassembly, he may insist on its replacement (from the +1 500 β‚½).
  • πŸ› οΈ Cleaning or replacing plumes: Oxidized contacts or torn touchscreen plumes will require additional costs (from the oxidized contacts to the stained touchscreen plumes). +500 +2 000 β‚½).
  • πŸ”„ Data portability: If the phone does not turn on after changing the screen, you may offer firmware recovery (+1 000–3 000 β‚½).
  • πŸ”’ Unlock the bootloader: On some models (Poco) F3, Xiaomi 11T) After replacing the display, the protection that requires unlocking may work (+500–1 500 β‚½).

⚠️ Warning: If the wizard says "motherboard needs to be replaced" because of a broken screen, that's a clear sign of fraud.

To avoid unexpected expenses, make sure you know in advance:

Is the diagnosis included in the price?

Is there a guarantee for parts and work?

Will there be additional costs if hidden defects are discovered?

Why can’t the screen be replaced?
If the touchscreen does not respond to touch after repair, the reasons may be as follows: 1. Incorrect connection of the plume – the master could not fix the connector well. 2. Incompatible spare part – cheap analogues often do not support all the functions of the original. 3. Damage to the controller – if you did not disassemble the chip responsible for the sensor. 4. Calibration is necessary – some models (Poco X3, Redmi Note 10) require software adjustment after changing the screen.

5 How to Save Money on Screen Replacement: 5 Ways to Work

Replacing the display with Xiaomi can cost a penny, but there are legal ways to cut costs without risking the device.

  1. On AliExpress or in Russian stores (for example, MegaDetail, FixPriceService), the original screen for the Redmi Note 12 can be found 20-30% cheaper than in the service.
  2. Use a used display on Avito or in repair teams, it's often the work screens from donated phones that sell, but if the seller provides a guarantee, you can save up to 50%.
  3. Quality copies from BOE or Tianma (used in the original builds) are 30-40% cheaper, but almost not inferior in characteristics.
  4. Official Xiaomi services and some workshops regularly offer discounts for repairs (for example, before the New Year or 11.11).
  5. Some workshops offer a discount if you give them a broken display – it can be used to repair other devices.

The riskiest, but cheapest, way is to replace yourself, but without experience, you can damage plumes, batteries, or even motherboards. If you do, use the instructions from iFixit and buy a specialized toolkit (from 500). β‚½).

Make a backup copy of the data (photos, contacts, messages)

Check with the master whether a warranty for the spare part is given

Check if the battery is swelling (this can make repairs more difficult)

Take a photo of the serial number of the phone and screen (for warranty cases)

-->

6.What to do if the screen is not working properly after replacement?

Even after a professional repair, problems can arise: flickering, a broken touchscreen, broken pixels or improper color reproduction.

πŸ”Έ The screen flickers or spontaneously changes brightness

Reason: bad plume contact or incompatible part.

- Go back to the workshop and demand the plume be reconnected.

If the flicker is left, replace the display with the original.

πŸ”Έ Touchscreen doesn't respond to touch

Reason: a faulty controller, a damaged plume or a lack of calibration.

For Poco X3 models, Redmi Note 9 may require firmware calibration data via Fastboot.

Check if the sensor is turned off in the settings (Settings β†’ Special features β†’ Touchscreen).

πŸ”Έ Colors distorted (greenish or pink hue)

The reason: cheap screens with poor color reproduction.

Try calibrating the colors in the engineering menu (code #36446337## for Xiaomi).

If it doesn't work, just replace it with the original.

πŸ”Έ There's broken pixels.

Cause: physical damage to the matrix during installation.

If you have fewer pixels (1-3), you can use programs like Dead Pixel Buddy (not always helpful).

If there are many defects, demand a replacement under warranty.

⚠️ Note: If the master refuses to eliminate defects, citing "part features", demand a written refusal and contact Rospotrebnadzor. By law, the warranty for repairs is valid even when using non-original parts, if they were agreed in advance.

7.When repairs are inappropriate: cases when it is cheaper to buy a new phone

Sometimes it's so expensive to replace a screen that it's easier to buy a new smartphone.

  • πŸ’Έ The cost of repair exceeds 50% of the price of a new phone For example, replacing the screen on the Xiaomi 12 Pro will cost 12 000 β‚½, The new Redmi Note 13 Pro+ costs 25,000 β‚½. In this case, it is better to pay and update the device.
  • ⚑ For models Redmi Note 5 or Mi 8 original spare parts are no longer produced, and analogues quickly fail.
  • πŸ”‹ If in addition to the screen you need to change the battery or repair the motherboard, the total costs may exceed the cost of a used smartphone in good condition.
  • πŸ“‰ The model is outdated, for example, Redmi 7A s 720p-It's not like modern apps are not going to be able to use a screen or a weak processor.

Before making a decision, check the prices of used models on Avito or Yule. X3 Pro in good condition can be found for 10,000-12,000 β‚½ β€” The same amount of screen replacement in the official service.

πŸ’‘

If your Xiaomi is older than 2020 and costs more than 7,000 repairs β‚½, Compare that to the price of a new Redmi or Poco, and it’s often more profitable to upgrade your phone.

FAQ: Frequent questions about changing the screen on Xiaomi

❓ Can I replace the screen with Xiaomi for free?
Yes, but only if the failure was not your fault (for example, a factory defect), mechanical damage (cracks, chips) is not covered by the warranty, except for the Xiaomi Care models, but it is valid only in the first 6-12 months.
❓ How long does it take to replace the screen?
In a private workshop, it can take 30 minutes to 2 hours, in official service, from 3 to 7 days (due to queue and diagnostics), and on some models (Xiaomi Mix Fold), repairs can take up to 2 weeks due to the complexity of the design.
❓ Why did the screen change the sensor stopped working?
On models with an optical scanner (Xiaomi 11T, Redmi K50), the sensor is built into the display. If the wizard installed a non-original spare part, the scanner may not work, the solution is: firmware driver or replace the original.
❓ Can you replace the entire screen, not the entire screen?
Theoretically yes, but only on models where the glass is separated from the matrix (e.g. Redmi). 9A). Most modern Xiaomi screen glued to the touchscreen, so you have to change the module as a whole. β‚½), repairs are more difficult.
❓ How to check if the original screen is installed?
: 1. Look at the matrix serial number (should match the original one). 2. Run the display test through the engineering menu (##283##. 3. Compare the color reproduction with another Xiaomi of the same model - the original color is more saturated. 4. Check the sensitivity of the touchscreen - analogues often have "dead zones".