How much does it cost to change the glass on the Xiaomi phone: prices 2026, models and life hacks

Xiaomi’s broken screen is one of the most common breakdowns faced by smartphone owners, and the problem is relevant for all the lines from budget Redmi to flagship Mi and POCO. The first thing that worries in this situation is how much it costs to change the glass on the phone, whether it is possible to save and where to repair. In this article, we will analyze the real prices for 2026, the nuances for different models and ways to avoid overpayment.

It's important to understand that changing glass is not always a simple procedure. In some cases, the wizards suggest changing the entire display module, even if only the outer glass is damaged. This can increase the cost of repair by 2-3 times. We will tell you how to distinguish an honest master from someone who is trying to impose unnecessary services, and which Xiaomi models can be repaired at minimal cost.

Why the glass breaks on Xiaomi: top-5 cause

Glass on Xiaomi smartphones doesn't always fail due to falls, sometimes due to design features or factory defects, and here are the main reasons why owners turn to the service:

• 💥 Mechanical damage - a fall on asphalt, a blow to a hard surface (even from a height of 50 cm can be enough for a crack).
• 🔥 Overheating or hypothermia - sharp temperature changes (for example, if you leave your phone in the cold, and then bring it to a warm room).
• 🔋 Battery bloating – if the battery starts to “puff up”, it presses on the screen from the inside, leading to cracks.
• 🛠️ Poor repairs – if the display was previously changed and cheap glue or improper glass was used.
• 🏭 Factory marriage is rare, but occurs in batches of some models (for example, Redmi Note 10 Pro with problems of the adhesive layer).

Interestingly, curved-screen models (such as the Xiaomi Mi 11 Ultra or POCO F4 GT) break more often because of the complexity of the design, their glass is thinner and worse tolerates side impacts, while budget Redmis with flat displays often withstand even serious falls, depending on luck.

If the crack appeared for no apparent reason (the phone did not fall, did not wet, did not overheat), this is an occasion to check the warranty. In rare cases, the manufacturer admits the defect and changes the screen for free.

How much does it cost to replace glass on Xiaomi: prices 2026 on models

The cost of repair depends on three key factors: the model of the phone, the type of damage (only glass or the entire display module), and where you repair (official service, private master or yourself).

Please note: prices are for original parts or quality analogues (for example, glass from the BOE Small workshops can offer cheap Chinese copies for 1,000 to 1,500 dollars. ₽, But they often turn yellow over time and react less to touch.

The cost also depends on the type of screen:

• 📱 AMOLED — 30-50% more expensive due to the complexity of disassembly (for example, Xiaomi 13 Pro).
• 📱 IPS LCD — It is cheaper but rare (mostly in budget Redmis).
• 📱 Screens with high refresh rate (120/144 Hz - repairs cost 20% more.

⚠️ If you are offered to replace the glass on Xiaomi for less than 1,500 ₽ — This is a cause for concern, and it's likely to be using poor-quality materials or non-original glue, which will detach the screen in 1-2 months.

Where to change glass cheaper: comparison of options

The choice of the place to repair directly affects the final cost, and consider the pros and cons of each option.

1. Official Xiaomi Service Center

Pros:

• ✅ Work guarantee (usually 6 months).
• ✅ Original parts (but not always – sometimes put certified analogues).
• ✅ Diagnosis before repair (free of charge).

Cons:

• ❌ The highest prices (by 20-30% more expensive than privately owned).
• ❌ Long term repair (from 3 days to a week).
• ❌ Often impose the replacement of the entire module, even if you can do with glass.

2. Private service centres

Pros:

• ✅ Prices are lower by 30-50% compared to official centers.
• ✅ Quick repairs (often while you wait").
• ✅ You can agree on a guarantee (usually 3 months).

Cons:

• ❌ The risk of running into unscrupulous masters (use cheap spare parts).
• ❌ There is no official guarantee from Xiaomi.
• ❌ Not everyone is taking on complex models (for example, Xiaomi Mix Fold 3).

3. Self-substitution

Pros:

• ✅ Minimum cost (only the price of glass) + tool).
• ✅ You can choose quality parts yourself.

Cons:

• ❌ High risk of damage to plumes or matrix.
• ❌ Special tools are needed (dryer, suckers, mediators).
• ❌ There is no guarantee – if something goes wrong, you will have to carry it to the service.

For clarity, compare the cost of replacing glass on the Redmi Note 11 Pro+ in different places:

• 🏢 Official service: 5,200 ₽ (module / 2 800 ₽ (glass).
• 🔧 Private workshop: 3,500 ₽ (module / 1 900 ₽ (glass).
• 🛠️ Self-driving: 1,200 ₽ (glass + glue) + tool (~1 500 ₽ first-replacement).

💡

If the phone is warranty, first check if it covers screen damage, 90 percent of the time it doesn't, but sometimes the manufacturer is willing to meet the deadline.

Can you replace the glass, not the entire display?

And the answer is, yes, you can, but not on all models. It depends on the design of the screen.

• 🔄 OLED/AMOLED-screens (most of today's Xiaomi) -- glass is glued to a matrix. It can be separated, but it's a laborious process with the risk of damaging the display. 30–50% more expensive than replacing the module.
• 🔲 IPS LCD (Budget models like Redmi A1) — glass often goes separately from the matrix, so it is easier and cheaper to replace it.
• 🔧 Screens with 3D-glass (e.g. Xiaomi Mi 11) - virtually non-repairable. Even if you change the glass, the leakage will break, and eventually there will be condensation.

If the master says you have to change the entire module, ask them to show you the damage to the matrix, often a trick to take more money, and the real breakdown of the matrix is:

• 🖥️ Vertical/horizontal bars on the screen.
• 🖥️ Flickering or "broken" pixels.
• 🖥️ Lack of image when working lighting.

If these symptoms do not exist, you can safely insist on replacing only glass. In Moscow and large cities, there are workshops that specialize in such repairs (for example, using a laser to separate glass from the matrix).

Step-by-step: how to change the glass yourself

If you're saving and replacing your glass with your own hands, follow this instruction, and we warn you that the process requires care and patience, and that an error can cause the display to break completely.

Glass replacement kit (glass + glue)|Fur (preferably construction)|Plastic mediators|Suckers|Screwdriver (for disassembling the case)|Scalpel or knife|Scotch (for fixing the plumes)|Gloves (optional)

-->

Step 1. Turn off the phone and remove the back cover

Turn off the device, remove it. SIM-Carefully attach the back cover with a plastic pickup (most Xiaomi uses it on latches) and be careful not to damage the battery plumes and cameras.

Step 2. Turn off the battery.

This is a must! Use a screwdriver to unscrew the battery plume mount, and if you don't turn off the power, you can burn the motherboard when you heat the screen.

Step 3. Heat the screen with a hairdryer.

Set the temperature on the hair dryer 80-90°C and evenly warm the screen around the edges for 3-5 minutes. This will soften the glue. Don't overheat - you can damage the matrix!

Step 4: Separate the glass with a mediator

Carefully apply a plastic tool to the glass, starting at the corner. If the glue is too strong, warm it up again. Don't use metal objects, they can scratch the matrix.

Step 5: Remove the old glue and install the new glass

Clean the glue residues from the matrix with alcohol or a special solvent. Apply a new glue layer (usually complete with glass) and gently press the new glass. Use suction cups to fix it accurately.

Step 6: Get your phone together and check it.

Put the battery on, turn on the phone, and check the sensitivity of the screen, and if there are dead zones, it means that the glass is installed incorrectly or the plumes are damaged.

⚠️ On models with ultrasonic fingerprint scanner (e.g. Xiaomi) 13T Pro) after the glass is replaced, the sensor may stop working, in which case additional adjustment through the engineering menu or firmware will be required.

💡

Before gluing the glass, place the phone under a press (for example, between two heavy books) for 10-12 hours, which will help to avoid bubbles and detachments.

How to Save Money on Glass Replacement: 5 Ways to Work

Replacing glass isn’t the cheapest procedure, but there are ways to reduce costs without risking the phone.

1. In workshops, you often charge 30-50% on the price of glass, buy it in advance on AliExpress or in trusted stores (for example, FixPriceService), the main thing is to check compatibility with your model.
2. Many services offer discounts for a review, a friend or payment online. For example, in the Connected Service, there are often promotional codes for 10-15%.
3. Choose workshops with free diagnostics Some services charge 300-500 ₽ Look for those that have free diagnostics (e.g. iFix or TechnoDoctor).
4. Change the glass "on the promotion" when buying a cover or film Some communication salons (for example, MTS or Beeline) give a discount for repairs if you buy accessories from them.
5. If you have phone insurance (e.g. from Sberbank or AlphaInsurance), check if it covers screen damage. Sometimes you can get back up to 70% of the cost of repairs.

Another life hack: if the crack is small and doesn't interfere with your phone, you can temporarily "preserve" it with tape or with a special film (Tempered Glass), which will not solve the problem, but will prevent further cracking and dust ingress.

Frequent mistakes when replacing glass and how to avoid them

Even experienced craftsmen sometimes make mistakes that lead to additional costs, and here are the most common mistakes and how not to repeat them:

• 🔥 Overheating of the screen — if you heat the matrix too much with a hair dryer, it can change color or stop working. Optimal temperature: 80-90°C no longer than 5 minutes.
• 🧲 Using metal tools -- scratches on a matrix or plumes will lead to artifacts on the screen.
• 💧 Moisture or dust — if debris gets under the glass, condensate or dirty spots will eventually appear.
• 🔌 An unconnected battery is fraught with short circuits when heated. Always disconnect the battery before repair!
• 📏 Incorrectly centering the glass – if the glass is set curved, there will be sensor problems (such as broken edges of the screen.

If there are problems after the replacement:

• 🖱️ The touchscreen does not work – check the connection of the plume or reflash the phone.
• 🔳 There's a bar on the screen, probably a damaged matrix, and you're going to need a replacement module.
• 🔋 The phone discharges quickly - perhaps during the assembly damaged the battery or its plume.

If you are not sure of your abilities, it is better to entrust the repair to professionals. In Moscow and St. Petersburg, there are workshops that give a guarantee even for self-purchased spare parts (for example, FixLab or RepairTechno).

FAQ: Answers to popular questions