Replacement of the screen on Xiaomi 9C: prices 2026, where cheaper and how not to run into fraud

Why Xiaomi 9C screen fails and when to change it

Xiaomi Redmi 9C (codenamed angelica) is one of the most vulnerable parts of the smartphone. Even with careful use, the display can crack from a fall from a height of 50 cm, and the matrix can fail after moisture or overheating. But not every crack requires a complete replacement: sometimes it is enough to change the glass or repair the plume.

When changing the screen is required:

  • πŸ’₯ Broken glass + broken touchscreen – if the sensor does not respond to touch, even partially.
  • 🌈 Rainbow stripes or black spots under the glass are a sign of damage to the matrix.
  • πŸ”₯ Flickering or spontaneous display switching on/off is often associated with contact oxidation.
  • πŸ’§ Liquid intake (even if the screen is working, it is a matter of time before the plume corroses).

Here’s when you can do without a replacement:

  • πŸ•ΈοΈ Small scratches on the glass -- they're polished out.
  • πŸ“± Detachment of the sensor at the edges β€” sometimes the squeezing helps.
  • πŸ”„ Software glitches (e.g. after the MIUI update) – try resetting to factory settings.

⚠️ Warning: If after a drop, the Xiaomi 9C screen shows an image, but the touchscreen does not work, do not rush to change the display.

πŸ“Š What Happened to Your Xiaomi Screen? 9C?
The glass cracked, but the touch works.
The screen doesn't respond to touch.
Colored stripes appeared.
Fell in the water.
Other

How much does it cost to replace the screen on Xiaomi 9C in 2026: a comparison of prices

The cost of replacement depends on three factors: the type of screen (original or analogue), the region (prices in Moscow and the regions vary by 20-30%) and the status of the workshop (official service vs private master).

Screen typeCost (β‚½)Where they change.PlusesCons
Original Screen (OEM)6 500 – 9 000Official Xiaomi Services, Authorized Partners6-12 months warranty, perfect color reproduction, no calibration issuesExpensive, long wait (if not available)
High quality analogue (A+, Copy 1:1)3 500 – 5 000Private service centers, workshopsPrice 2 times lower than the original, often indistinguishable in quality1-3 month warranty, possible problems with autobrightness
Budgetary analogue (Copy)2 000 – 3 000Low-profile workshops, AliExpress (self-substitution)Minimum price, fast.Poor color reproduction, possible "broken" pixels, no guarantee
Only glass (if the matrix is intact)1 500 – 2 500Workshops with lamination equipmentCheaper than full replacement, the original matrix is retainedThe risk of detachment over time, not all workshops are taken

Important: Xiaomi's official services often refuse to put analogues, even high quality. If you are forced to original screen for $9,000 β‚½, check if there are alternatives - sometimes managers "forget" to offer cheaper options.

Prices in regions are typically 10 to 15 percent lower than in Moscow, such as in Yekaterinburg or Novosibirsk, the original screen will cost 5,500-7,500 β‚½ to replace, and in smaller cities it will cost 4,800 β‚½. But beware: too low a price (below 3,000 β‚½ for the original) is a sign of cheating.

πŸ’‘

Before you change the screen, check if the camera and speaker are working. If these modules stop working after the fall, the board may be damaged, repairs will cost more.

Where to change the screen: official service vs private workshop

Choosing between Xiaomi’s official service and a private workshop is always a compromise between price, speed and quality.

Official Xiaomi Service Center

Pros:

  • βœ… 12 months warranty for work and parts (usually 1-6 months in private workshops).
  • βœ… Original parts with factory calibration (no problems with autobrightness or color reproduction).
  • βœ… Diagnosis before repair – check if the board or plumes are damaged.

Cons:

  • ❌ Expensive – prices are 20–30% higher than in private workshops.
  • ❌ Long β€” if the screen is not available, you will have to wait 3-7 days.
  • ❌ Tough rules β€” no analogues, even if you accept the risks.

Private workshop

Pros:

  • βœ… Prices are 30-50% lower, and you can save 2,000-3000 β‚½.
  • βœ… Quickly – replaced in 1-2 hours, often on the day of treatment.
  • βœ… Flexibility – any screen (even a budget screen) will be put on if you agree.

Cons:

  • ❌ Risk of running into poor-quality work - check reviews and ask for a guarantee.
  • ❌ There are no original parts β€” even if they say the screen is β€œoriginal,” it’s often a hoax.
  • ❌ Lack of diagnosis – may not notice the damage to the board, which will quickly fail the screen.

⚠️ Warning: If you're offered a Xiaomi 9C screen replacement in a private workshop for 1,500 to 2,000 β‚½, it's almost certainly a hoax. The real cost of even a budget screen is 1,800 β‚½, plus a master's job. Too low a price means you're either going to get a used display or you're using cheap adhesives that will detach the screen in a month.

πŸ’‘

The best option is an authorized partner of Xiaomi (not an official service!). There put high-quality analogues with a guarantee of 6 months, and prices are 15-20% lower than in branded centers.

How to save on screen replacement: 5 proven ways

Replacing the screen with the Xiaomi 9C isn’t the cheapest procedure, but there are ways to cut costs without risking quality.

  1. Buy the screen yourself and give it to the wizard for installation only. On AliExpress, the original screen for Redmi 9C costs ~4 500β‚½ (with delivery), and in the workshop you were told the price is 7000β‚½? Order the spare part yourself and pay only for the work (1000-1 500β‚½).
  2. Look for promotions and discounts. Xiaomi's official services sometimes hold promotions (such as changing the screen at a discount). 20Percentage of receipts for the purchase of a phone, follow the promos on the sites mi.com/ru/service.
  3. Choose a pay-after workshop, which reduces the risk of being sold a poor screen, and if the repairman refuses to show the part before paying, look for another one.
  4. If the phone is purchased less than a year ago and the screen cracks without mechanical damage (for example, due to a factory defect), the service can change it for free, but the proof of the manufacturer's fault will have to be provided independently.
  5. Consider a used screen. On Avito or in smartphone repair teams, you can find work screens from disassembled Xiaomi 9C for 1,500-2,500 β‚½. Risky, but if the phone is not new, it is justified.

Check if the screen is original (ask for a certificate)

Compare prices in 3-4 workshops

Check the reviews about the master (especially on Yandex.Maps)

Ask about the guarantee (minimum 3 months)

Take a picture of your phone's IMEI before repair (in case of a replacement)

-->

Step-by-step: how to replace the screen on Xiaomi 9C yourself

If you decide to replace yourself, be prepared for the fact that the process will take 2-3 hours and require care. Without experience, it is better not to take risks - errors when disconnecting the plumes or gluing can lead to complete breakdown of the phone.

What you need:

  • πŸ”§ New screen (check compatibility with Redmi 9C/angelica model)
  • πŸ”₯ dryer or heat tile.
  • πŸͺ› Plastic blades and suction cups (metal tools will damage the body!).
  • 🧴 Glue B-7000 or similar to glue a new screen.
  • ⚑ Battery (if the screen does not turn off during disassembly, risk of short circuit!)

Step-by-step process:

  1. Turn off the phone and remove the SIM- card. If the battery is not removable, discharge the phone to 20-30%, which will reduce the risk of fire when heated.
  2. Heat the edges of the screen with a hair dryer (60-70Β°C). Keep the hair dryer at a distance of 5-10 cm to avoid overheating the display. The glue should become soft, but not liquid.
  3. Put a plastic blade on the screen. Start at the bottom edge (near the charging connector). If the screen doesn't lend itself, warm up again.
  4. Disconnect the battery and screen plumes. Use tweezers to gently disable the connectors. Don't pull the wires! Photos of Xiaomi 9C battery plumes: white connector at the bottom of the board. Screen plume is black, located to the right of the battery.
  5. Set up a new screen. Make sure all seals are in place, then plug in the plumes and glue the display. Use the B-7000 glue with a thin layer around the perimeter.
  6. Check the health. Connect the phone to charge (don't turn it on right away!) If the screen catches fire and responds to touch, the repair is successful.

⚠️ Warning: If after the replacement of the Xiaomi 9C screen does not turn on or artifacts appear (strips, flickering), check: The density of the plumes fit (sometimes helps to reconnect them); the integrity of the contacts on the board (if they overheat, they could oxidize); screen compatibility (even original parts are defective); If the problem remains, contact the master.

Frequent Screen Replacement Mistakes and How to Avoid Them

Even experienced craftsmen sometimes make mistakes that lead to re-repair, and here are the most common problems and ways to prevent them:

Mistake.Effects of consequencesHow to avoid
Use of metal toolsScratches on the body, damage to plumesWork only with plastic blades
Overheating of the screen with a phenomeDetachment of the polarization layer, yellowing of the matrixKeep the hair dryer at a distance of 10 cm, the temperature is not higher than 70 Β° C.
Incomplete shutdown of plumesShort circuit, board failureDisconnect the battery first, check the multimeter
Savings on glueThe screen is peeled off after 1-2 monthsUse a high-quality glue (B-7000, LOCA)
Unverified screen with AliExpressBroken pixels, problems with touchscreenBuy from trusted sellers with a 98%+ rating

Another common problem is that the screen is incompatible with the firmware, and when you replace it, the autobrightness or gestures may stop working, and this is treated by flashing the phone over the Fastboot or resetting it to the factory settings, and if you're not sure, you should trust the wizard.

πŸ’‘

Before buying a screen on AliExpress, check if it supports Always On Display (if it was in the original), and cheap counterparts often don’t implement it.

User reviews: real experience of changing the screen on Xiaomi 9C

To give you a sense of what to expect from the renovation, we've collected real-world feedback from Redmi 9C owners about the screen replacement across different services. Names changed, reviews taken from the 4PDA and Mi Community forums.

Andrey, Moscow: "Changed the screen in the official service Xiaomi on Tverskaya. Cost - 7 800 β‚½ (original.) Work neatly, gave a warranty of 1 year. The only drawback - waited 5 days until the spare part was brought, but now the screen is as new, no problems with the sensor."

Ekaterina, St. Petersburg: "In a private workshop, they put a 3500 β‚½ analogue. Everything was fine at first, but after 3 months, they had vertical stripes. I went back to them and they said it was a 'screen feature', and they changed it for free under warranty. It's been six months now."

Igor, Novosibirsk: "I decided to save money and ordered a screen on AliExpress for 2,200β‚½. When I came, it turned out that the touchscreen was not calibrated - the touches were registered with a bias. I had to carry them to the workshop where they refashioned the phone, and ended up spending as much as a normal analogue would cost."

Olga, Kazan: I dropped my phone, the screen cracked, but the touch worked, and the service said it had to be changed completely, even though I only asked for glass, and I ended up paying 4,500.β‚½ instead of 1,800β‚½. I later found out that I was cheated – the glass could be changed separately."

And you can see from these reviews that the most reliable option is the official service, but it's also the most expensive one. Private workshops save money, but quality depends on the honesty of the craftsman. Self-substitution is risky if you don't have experience.

FAQ: answers to frequent questions about the replacement screen Xiaomi 9C

Can only glass be replaced if the matrix is intact?
Yes, but not all workshops take up this work, because the glass and matrix in Xiaomi 9C are glued together, and you need special equipment (laminator) to replace the glass, which costs 1,500-2,500 β‚½, but the risk of detachment remains over time.
How long does it take to replace the screen?
In the official service, 1 to 5 days (depending on the availability of spare parts); in the private workshop, 1-2 hours if the screen is available; self-replacement for beginners takes 3-4 hours.
Why does the screen not work after the screen change?
The reasons can be different: Bad connection of the plume (you need to reconnect), screen marriage (especially cheap counterparts), damaged fee (if the phone fell from a high altitude), incompatibility of firmware (solved by firmware reflash), take the phone back to the workshop, under guarantee, should fix the problem.
Will I be able to guarantee that the screen is broken because of my fault?
No, the warranty does not cover mechanical damage, but if the screen fails without falling (for example, due to factory defects or battery bloating), the service is obliged to change it for free during the warranty period (usually 1 year).
Can I use a phone with a cracked screen?
You can, but with reservations: If the cracks are only on the glass and the touchscreen works, the risk is minimal. If the glass crumbles and the matrix is exposed, it is better not to use, so as not to cut and damage the display further. If the cracks near the camera or speaker, check if the dust has not got inside. Prolonged use with a cracked screen can lead to moisture and corrosion of the board.