Xiaomi Redmi 5 is a popular budget smartphone released in 2017, but still in active use. One of the most common problems with this model is damage to the display: cracks, broken pixels or a broken touch screen. If you encounter such a problem, the first question is: how much will it cost to replace the screen and where is the best way to do it?
The cost of repairs depends on several factors: the originality of the part, the type of service center, the region, and even the complexity of the breakdown. In this article, we will analyze the current prices for 2026, compare the cost of official and informal services, and also tell you how to save without risk for the phone. If you are considering a self-replacement, here you will find the pros and cons of this approach.
Important: Redmi 5 It has two screen modifications for the resolution version. HD+ (720×1440) full HD+ (1080×2160). This affects the price of the spare part, so before repairing, check the model of your display in the settings (Settings). → The phone. → Version. MIUI → slip 5 once on the line "kernel version").
How much does it cost to replace the display on Xiaomi Redmi 5 in 2026: current prices
The cost of repairs is based on the price of the module itself (display + touchscreen) and the work of the master. The table below is the average prices for Russia for June 2026.
| Type of service | Cost of the spare part (₽) | Cost of work (₽) | Totally (₽) | Guarantee |
|---|---|---|---|---|
| Official Xiaomi service | 5 500–7 000 | 2 000–2 500 | 7 500–9 500 | 6–12 months |
| Authorized partner | 4 800–6 200 | 1 500–2 000 | 6 300–8 200 | 3–6 months |
| Informal service (original) | 4 000–5 500 | 1 200–1 800 | 5 200–7 300 | 1-3 months |
| Informal service (analogue) | 2 500–3 800 | 1 000–1 500 | 3 500–5 300 | 14-30 days |
| Self-sustaining replacement | 3 000–4 500 | — | 3 000–4 500 | No. |
What affects the price? Official Xiaomi services only use original parts, so the cost is higher. However, here you get a warranty of up to a year and check the phone on diagnostic equipment. In informal workshops, they often offer Chinese-made counterparts (such as from BOE or Tianma), which are cheaper, but can have worse color reproduction or touchscreen sensitivity.
Important: if the phone has stopped recognizing the fingerprint after replacing the display in an informal service, it is not the wizard who is to blame, but the lack of the original scanner (it is built into the screen on Redmi 5), in which case additional adjustment or replacement of the module will be required.
Original vs analogue: which display to choose for Redmi 5
When you change the screen, you'll be offered a choice of original parts or analogues, and we'll look at the pros and cons of each option.
- 🔹 Original display: full factory performance, perfect color reproduction, no touchscreen issues. Minus - high price (from 5,500) ₽) Deficiency (not all services are based on the original).
- 🔹 High quality analogues (e.g, BOE Or Tianma: 30 to 40 percent cheaper, visually almost the same, and there's a little bit of nuance, maybe a little bit different angles of view, or a little less bright backlight.
- 🔹 Budget analogue (no-name): price from 2,500 ₽, But the risks are high, with broken pixels, poor touchscreen sensitivity, or rapid wear and tear, and often these screens burn out after 6 to 12 months.
How to check the quality of a new display after replacement?
- 📱 Check the color rendering: compare with the other Redmi 5 (if possible).The original has more saturated colors, especially black.
- ☀️ Viewing angles: tilt the phone under 45° — on analogues, color distortions are possible.
- 👆 Touchscreen sensitivity: test swipes, multi-touch (simultaneous touch with two fingers) and gestures.
- 🔦 Backlight: turn on the white background at maximum brightness - on cheap analogues, "lights" around the edges are possible.
💡
If the wizard refuses to show the part before installation or does not give a guarantee on the analogue, this is a reason to be wary. Ask for a certificate for the display or check the reviews about the workshop.
Replacement of the display: is it worth the risk?
Replacing the screen with a Redmi 5 is technically possible, but it requires experience and tools. The average cost of a homemade repair part is 3,000-4,500. ₽ (It's a medium-quality analogue:
- ⚠️ Disassembly difficulty: Redmi 5 has a glue display, which can be damaged if removed carelessly.
- ⚠️ Special tools are needed: sucker, mediator, hair dryer (for heating the glue), tweezers and screwdrivers T3/T5.
- ⚠️ Loss of leakage: After replacement, the phone may be worse at protecting against dust and moisture (IP-certificate lost).
- ⚠️ Sensor problems: if the plume is not connected correctly, the illumination sensor or proximity sensor may stop working.
If you are still going to do your own repair, here is a step-by-step instruction:
☑️ Preparation for the replacement of the Redmi 5 display
For clarity, we recommend watching YouTube video guides (see "Redmi 5 display replacement"). Please note: if the phone does not turn on after the replacement or the screen flashes, the most likely problem is poor contact of the plume or damage to the motherboard.
What if the display does not work after replacement?
Where to change the display on Redmi 5: comparison of services
To save money, many people look for workshops with minimal prices, but low cost often hides the pitfalls. Consider the pros and cons of different options.
1. Official Xiaomi service
Pros:
- ✅ Original parts with guarantee.
- ✅ Diagnosis before repair (check whether the motherboard is damaged).
- ✅ Preservation of factory tightness.
Cons:
- ❌ Highest price: from 7,500 ₽).
- ❌ Long term repair (3-7 days).
- ❌ Not all cities have official services.
Authorized Partners
These are workshops that are partnered with Xiaomi, but are not official. Here you can save 10-15% compared to the brand service, but the warranty will be shorter (3-6 months), Suitable if you need a middle ground between price and quality.
Informal workshops
Prices here start from 3,500 ₽, But the risks are high:
- 🔴 Use of cheap analogues without guarantee.
- 🔴 Lack of diagnosis (may not notice damage to the board).
- 🔴 The risk of damaging the phone during disassembly (especially if the master is inexperienced).
How to choose a reliable workshop?
- 🔍 Check reviews on Yandex.Maps or 2GIS (pay attention to the latest comments).
- 📞 Call and ask what part will be put (original or analogue, manufacturer).
- 📄 Ask for the Parts Certificate (if the original is claimed to be the original).
- 💰 Compare prices in 3-4 workshops – too low cost should alert you.
💡
The best price/quality option is authorized Xiaomi partners, where you get the original part with a warranty, but save compared to the official service.
Hidden costs: what else can cost money when replacing the display
When repairing Redmi 5, the repairer often finds additional problems that require payment, and this can increase the total amount:
- 🔧 Replacement of glue/sealer: if the old glue is dried, the master will require a new one (200-500) ₽).
- 🔋 Diagnostics of the motherboard: if the screen is not working due to damage GPU or controller, the repair of the fee will cost 3,000-6,000 ₽.
- 🔄 Data portability: if the phone is not turned on, may be offered to retrieve information (from 1 000) ₽).
- 🛡️ Security glass/film: many services impose a protection installation "as a gift" for 500-1000 ₽.
How do you avoid the extras?
- Before repairing, take a photo of the phone from different angles (to prove what damage was originally).
- Check by phone whether the diagnosis is included in the cost of repair.
- If they offer additional services (cleaning, button replacement), ask how critical they are for your phone to work.
💡
If the master says that you need to change the battery, although before repair it worked normally, it can be a trick. ask to show the results of the diagnosis (test # #4636## in the dialer will show the status of the battery).
Frequent Display Replacement Mistakes and How to Avoid Them
Even in professional services, there are errors that lead to additional costs, and here are the most common problems and how to prevent them:
⚠️ Note: If the phone is rapidly discharged after the display is replaced, it is likely that the wizard damaged the battery plume or did not connect it tightly. In this case, return to the service - under warranty you must fix the defect for free.
- 🔹 Broken pixels: appear if the wizard did not check the screen before installation.Always require a spare part test on a special stand.
- 🔹 Poor touchscreen sensitivity: a common problem with cheap analogues. Check swipes and multitouch immediately after repair.
- 🔹 Display detachment: if the glue is applied unevenly, bubbles will appear on the edges of the screen.
- 🔹 The proximity sensor is not working, which means that the plume is not connected correctly, and the screen will go out during the call even if you do not hold the phone to your ear.
How to check your phone after repair:
- Turn on the diagnostic mode: dial ##6484## → Select Manual Test → check the touchscreen, sensors and display.
- Call the phone and check if the screen goes out when you lift it to the ear (the proximity sensor works).
- Turn on the brightness to the maximum and look at the screen from different angles - there should be no color distortion.