Broken glass on Xiaomi Redmi is one of the most common problems faced by smartphone owners of this line. Even a minor crack can eventually lead to a complete failure of the display, and fragments to injuries to the fingers. But how much does it cost to change the glass, and where is it more profitable to do it: in official service, at a private master or on your own?
In this article, we will analyze the current prices for glass replacement for all popular Redmi models (from Redmi Note 12 to Redmi 10A), compare the cost of original spare parts and analogues, and also tell you how to save without risk for the phone. You will learn why in some services the price can vary by 2-3 times, what pitfalls await during self-repair and how to check the quality of the master.
Spoiler: Replacing the glass with Xiaomi Redmi costs between 1,500 and 12,000 rubles depending on the model and the type of screen, but there are nuances that are not discussed even in service centers.
How much does it cost to replace glass with Xiaomi Redmi: prices by model (2026)
The cost of repair depends on three key factors: the model of the smartphone, the type of screen (AMOLED or IPS) and the status of the service center. Xiaomi’s official partners charge 20-40% more expensive, but give a warranty of up to 1 year. Private workshops save on spare parts, but the risk of running into a fake is higher.
Below are the current prices for replacing only glass (without sensor and matrix) for popular models. If the display is completely broken or does not respond to touch, the cost of repair will increase by 1.5-2 times.
| Xiaomi Redmi Model | Screen type | Cost (original), ₽ | Cost (analogue), ₽ |
|---|---|---|---|
| Redmi Note 13 Pro+ 5G | AMOLED, 120Hz | 8 000 – 11 000 | 4 500 – 6 000 |
| Redmi Note 12 Pro 5G | AMOLED, 120Hz | 6 500 – 9 000 | 3 800 – 5 000 |
| Redmi Note 11 Pro+ 5G | AMOLED, 120Hz | 5 500 – 7 500 | 3 000 – 4 200 |
| Redmi 12 | IPS, 90 Hz. | 3 500 – 5 000 | 1 800 – 2 500 |
| Redmi 10A / 10C | IPS, 60 Hz. | 2 500 – 3 800 | 1 500 – 2 000 |
⚠️ Note: Prices are for glass replacement only, if the sensor or touch layer is damaged, it will cost 1.5-3 times more to repair, such as replacing the display with a Redmi Note 13 Pro.+ It can cost up to 20,000 rubles in the official service.
Also, keep in mind that some models (like the Redmi Note 12 Pro) have glass glued to the matrix, in which case the wizard may insist on replacing the entire module, even if only the top layer is damaged.
Original vs analogue: what to choose and how much to overpay
The main question when replacing glass is to take the original part or save on the analogue, the difference in price can be as much as 50-70%, but the risks are also higher, and let's look at the pros and cons of each option.
- 🔹 Original glass: guaranteed quality, perfect color reproduction, no problems with sensor sensitivity. minus high price and shortage (new models have to wait 1-2 weeks).
- 🔸 Analogue (OEM): It is manufactured in the same factories as the original, but without the Xiaomi logo, the quality is almost identical, the price is 30-40% lower, the risk of running into a fake is minimal if you buy from trusted suppliers.
- 🔶 Chinese noname: lowest price, but also quality appropriate. Frequent problems: cloudy image, poor sensor sensitivity, rapid wear and tear. Suitable only for older models (Redmi) 7/8).
💡 If the budget is limited, choose OEM-Parts from proven brands: Tianma, BOE or Samsung Display (for the AMOLED-They supply components directly to Xiaomi, so the difference with the original is minimal.
How to distinguish the original glass from a fake?
⚠️ Attention: Some workshops offer "original" parts at the price of their counterparts, most often it's a hoax: either a fake or a used part. Always ask for a certificate or a check for the part!
Where to change glass cheaper: comparison of services
There are many options where you can replace the glass with Xiaomi Redmi, from official service centers to garage masters, let's analyze the pros and cons of each, as well as the average prices.
- 🏢 Xiaomi official service: 12 months warranty, original parts, but the price is 30-50% higher than the market).
- 🔧 Certified partners (for example, "Svyaznoy Service" or "TechnoDoctor"): prices are lower by 15-20%, warranty 6-12 months.
📊 Compare the cost of replacing glass on Redmi Note 12 Pro in different services (2026):
- Xiaomi Official Service: 7,500 – 9,000 ₽ (original).
- Certified Partner: 5,500 – 7,000 ₽ (OEM).
- Private workshop: 4,000 – 5,500 ₽ (analogue).
- Independently: 2,500 – 3,500 ₽ (spare + tool).
⚠️ Some services may impose "comprehensive repair" (glass replacement) + diagnostics + It's a ploy to raise the price, because if the glass is cracked and the sensor is working, it's just a matter of replacing the protective layer.
Check reviews on Yandex.Maps or 2GIS (at least 4.5 stars).
Ask if you have a work guarantee and spare parts (at least 3 months).
Check whether the original or analogue will be put (require a check for the part).
Look at what the workshop looks like: cleanliness and order are a sign of professionalism.
Compare prices in 3-4 services (the spread over 30% is a reason to be wary).-->
Self-replacement of glass: step-by-step instructions and risks
If you're saving and changing your own glass, be prepared for the challenges of the process, which requires precision, special tools and patience, and a mistake can result in a breakdown of the matrix or sensor, and then repair will cost 2-3 times more.
🔧 What's the matter:
- 🛒 New glass (OEM original).
- 🔥 Dryer or infrared station for heating glue.
- 📱 Suction cups and mediators for separation of glass.
- 🧴 Clay. B-7000 or LOCA (glue-wise).
- 🧤 Gloves and safety glasses (shatters are dangerous!).
📝 Step-by-step process:
- Warm the glass with a hair dryer (60–80°C) to soften the glue.
- Carefully apply the mediator to the glass, starting at the corner. Don't push too hard, you can damage the plumes!
- Remove the glue residue from the frame with alcohol or acetone.
- Apply new glue to the frame and press the glass (use a press or heavy book).
- Check the sensor sensitivity and the absence of bubbles.
⚠️ Attention: On models with AMOLED-The glass is glued to a matrix with screens (for example, Redmi Note 12 Pro), and if you replace it yourself, the risk of damaging the display is more than 60.
💡
Before changing the glass, back up your data! during the repair process, you may experience a reset or memory damage. Use Mi Cloud or connect your phone to your PC via Mi PC Suite.
Hidden expenses: what else will have to be spent
Many people forget that replacing glass is not just about the price of a spare part, but it can be a costly process that you won't be told about beforehand, and it's about the most common surprises.
- 🔧 Diagnosis: some services take 500-1000 ₽ Check in advance if it is included in the cost of repairs.
- 🚚 Part delivery: if glass is not available, you will have to wait 3-7 days and pay for logistics (300-800) ₽).
- 🔄 Sensor calibration: newer models (Redmi Note 13) require software tuning after glass replacement (1000-1500) ₽).
- 🛡️ Security glass/film: many services impose a protection installation for 500-1 500 ₽. You can refuse and stick it yourself.
💰 Example: You brought a Redmi Note 12 with cracked glass, and the service says, "The cost of repair is 4,000." ₽". But you'll have to pay more in the end:
- 1 000 ₽ For diagnosis (revealed "hidden damage"),
- 1 500 ₽ for sensor calibration,
- 500 ₽ glass-shield.
Total: 7,000 ₽ 4,000 ₽.
💡
Always ask for a preliminary estimate by work and parts, and if the master refuses, look for another service.
How to Save Money on Glass Replacement Without Risking Your Phone
There are several legal ways to reduce the cost of repairs without sacrificing quality, and the key is not to buy too cheap deals (price below 1,500). ₽ For new models, there is a reason to be wary).
- 🛒 Buy your own parts: in services, the glass markup can be as high as 200%. OEM-spare part on AliExpress or in a trusted store (for example, "Mobile Man") and bring it to the master.
- 📅 Look for promotions: many services offer discounts on Xiaomi repairs 1-2 times a month.
- 🤝 Arrange for barter: some craftsmen agree to repairs in exchange for feedback or advertising.
- 🔄 Change the glass to a used phone: if the model is old (Redmi) 9/10), Sometimes it is cheaper to buy a used device with a whole screen and rearrange the display.
💡 Lifehack: If the crack is small and doesn't interfere with use, you can temporarily "preserve" it with scotch tape or Screen Protector, which will prevent dust from getting in and spreading damage. Costs from 200. ₽.
⚠️ Warning: Do not use superglue or epoxy to "repair" cracks! this can damage the matrix and make further glass replacement impossible.
Frequent mistakes when replacing glass and how to avoid them
Even in service centers, sometimes mistakes are made that lead to re-repair, and here are the most common problems and how to prevent them:
- 🔥 Screen overheating: If you heat the glass with a hair dryer longer than 2-3 minutes, you can damage the matrix.°C.
- 💦 Moisture: when gluing glass, you can not use alcohol or water - only a special glue (LOCA or B-7000).
- 📱 Damage to plumes: on Redmi Note models 11/12 The sensor plumes are very fragile, and they're easy to break with a mediator.
- 🖥️ Incorrect calibration: after replacing the glass with AMOLED-The screens need software tuning, and without it, the sensor will float".
🛠️ How to check the quality of repairs:
- Check the sensitivity of the sensor at all corners of the screen (use the test in Settings → Display → Calibration).
- Light a flashlight on the screen at an angle - there should be no bubbles or detachments.
- Make sure there is no "parasitic" backlight (light spots at the edges).
💡
If you have a dead zone on the sensor after you change the glass or you have a color distortion, you need to be re-repaired under warranty, which is a sign of poor performance.