Replacement of the display on Xiaomi Redmi Note 8: prices 2026, where better to repair and how to save

Xiaomi Redmi Note 8 remains one of the most popular budget smartphones even years after its release β€” its reliability and price-performance ratio have been appreciated by millions of users. However, the most vulnerable part of any phone is a display that is easy to break when dropped. If your Redmi Note 8 gets cracked, stained or no longer responds to touch, a screen replacement is inevitable. But how much will it cost in 2026? Where is it better to repair it β€” in an official service, a private workshop or try to do it yourself?

In this article, we will discuss the current prices for the replacement of the display for the Xiaomi Redmi Note 8 (including the Note 8 Pro and Note models). 8T), We'll compare the cost of original and analog parts, talk about the pitfalls of cheap repairs, and give you tips on how to save money without risking your phone, and you'll also learn what symptoms indicate that you need to replace your screen, and when the problem may be in another node.

How much does it cost to replace the display on Xiaomi Redmi Note 8 in 2026: a comparison of prices

The cost of repair depends on three key factors: the type of display (original or analogue), the region (prices in Moscow and the regions can vary by 20-30%) and the status of the workshop (official service, authorized partner or private master).

Type of displayCost (β‚½)Where do they set up?Guarantee
Original (OEM)6 500 – 9 000Official Xiaomi services, authorized centers6–12 months
Premium class analogue (A+)4 200 – 5 500Private workshops, some service centers3–6 months
Medium quality analogue (A)2 800 – 3 800Budget workshops, online services1-3 months
Low quality copy (B/C)1 500 – 2 500Unreliable workshops, "garage" servicesAbsent or 1 month

⚠️ Note: Original display prices may vary due to the dollar – Xiaomi buys parts in China and their value is pegged to the currency. During crisis periods (for example, autumn 2022 or spring 2026), prices could rise by 15-20% per month.

Also, note that the price often does not include:

  • πŸ”§ Dismantling the old screen (some workshops take a look at it) +500–1 000 β‚½ squash).
  • πŸ› οΈ Replacement of sensor or plume (if damaged separately from the display - up to +2 000 β‚½).
  • πŸ“¦ Delivery (when ordering a spare part for you - from 300) β‚½ regionally).

πŸ“Š Where do you plan to repair the Redmi Note 8?
In the official service Xiaomi
In a checked private workshop
I will order the spare parts myself.
I haven't decided yet.

Original vs analogue: which display to choose for the Redmi Note 8

The main question when replacing the screen is to take the original part or save on the analogue, and let's analyze the pros and cons of each option.

Original display (OEM) β€” It's a part that's made in the same factory as the screen on your phone:

  • βœ… 100% compatibility – no problems with color calibration, sensor sensitivity or backlighting.
  • βœ… Long service life – original matrices last 3-5 years without burning out pixels.
  • βœ… Guarantee – official services give up to 1 year.

Cons:

  • ❌ High price – 2-3 times more expensive than analogues.
  • ❌ Long wait – in the regions, original parts can deliver 1-2 weeks.

Analog displays are divided into three categories:

  • πŸ₯‡ Premium (A+) β€” They're almost indistinguishable from the original, they're made in the same factories, but for third-party vendors. OEM.
  • πŸ₯ˆ Medium quality (A) – there may be slight variations in colors (e.g., a cooler hue), sometimes worse oleophobic coating.
  • πŸ₯‰ Poor quality (B/C) β€” They're cheap, low-color reproductions, low-brightness, and fast-wearing copies. 3–6 months.

How to distinguish the original display from a fake?
When buying a spare part yourself pay attention to: 1. Packaging - the originals are in branded boxes with a hologram of Xiaomi. 2. Trail - on the original plume there is a marking of the model (for example, "Redmi Note 8") LCD"). 3. Color rendering - fakes often have a greenish or bluish hue when tested on a white background. 4. Oleophobic coating - on the original, fingers slide better and traces of fat are almost non-existent.

⚠️ Attention: B 2023–2026 In recent years, cases have become more frequent when unscrupulous workshops install cheap class displays. B/C, pass them off as A+. To avoid cheating, require a screen test before payment (check color rendering, sensor sensitivity, and no broken pixels).

Where to replace the display on Redmi Note 8: comparison of services

The choice of workshop directly affects the price, quality and warranty, and consider all options, from official services to self-repair.

1. Official Xiaomi Service Centers

Pros:

  • βœ… 6-12 months guarantee for work and spare parts.
  • βœ… Use only original or certified displays.
  • βœ… Diagnosis before repair (free or for 300-500) β‚½).

Cons:

  • ❌ The highest prices (from 6,500) β‚½ original).
  • ❌ Long-term repairs (3-7 days if spare parts are not available).
  • ❌ In small towns, there may be no official centers.

2. Authorized partner centers

These are workshops that work with Xiaomi, but are not official, and can offer original parts at lower prices.

Average cost: 5,500 – 7,500 β‚½ (original), 3,500 to 4,500 β‚½ (A+ analogue).

3. Private workshops and services

The prices are lower, but the quality depends on the reputation of the master.

  • πŸ” Look for reviews on Yandex.Maps or 2GIS (pay attention to the photo "before / after").
  • πŸ“ž Call and ask what display will be installed (require the name of the model).
  • πŸ›‘οΈ Check if you have a guarantee (at least 3 months).

Average cost: 3,000 - 5,000 β‚½ (A+ analogue), 1,800 - 3,000 β‚½ (A class).

4. Self-substitution

If you have experience in electronics repair, you can save money by buying a display and replacing it yourself.

  • πŸ“± Original Display: 5,000 – 7,000 β‚½ (on AliExpress, eBay).
  • πŸ“± Analogue A+: 2 500 – 3 500 β‚½.
  • πŸ“± Repair kit (suction cups, mediators, glue): 500 - 1000 β‚½.

- Phone model (e.g. For Xiaomi Redmi Note 8) M1908C3JG").

- Type of matrix (IPS LCD, 6.3", 2340Γ—1080).

- The presence of a sensor and a plume (sometimes sell only a matrix without a touchscreen).-->

⚠️ Warning: If you replace yourself, you lose the official warranty on the phone (if it is still valid), and there is a high risk of damage to the plumes or battery when disassembling - the Redmi Note 8 has a fragile design.

Step-by-step: how to replace the display on the Redmi Note 8 yourself

If you decide to repair yourself, follow this instruction.

  • πŸ”§ New display (with sensor and plume).
  • πŸ”§ Set for disassembly (plastic mediators, suckers, screwdriver) T3).
  • πŸ”§ Hair dryer or thermoplatform (to soften glue).
  • πŸ”§ Clay. B-7000 double-sided screen tape.

Turn off the phone and remove it. SIM-memory-card|Discharge the battery to 25-50% (to avoid fire)|Prepare the workplace (clean surface, good lighting)|Make a backup copy of the data (in case of an error)|Watch the video guide to the dismantling of the Redmi Note 8-->

Step 1: Dismantling the old display

1. Heat the edges of the screen with a hairdryer (temperature) ~60Β°C) for 2-3 minutes to soften the glue.

2 With the help of a suction cup, gently lift the display on one side.

3. Insert a plastic mediator and slowly guide them around the perimeter, separating the screen from the case.

4. disconnect the display and battery plumes (use a screwdriver). T3).

Step 2: Installation of a new display

1. Connect the new screen plumes to the motherboard.

2.Aply a thin layer of glue B-7000 around the perimeter of the case or use bilateral scotch.

3. Carefully press the display, avoiding distortions.

4. Check the working capacity (sensor, illumination, color reproduction).

Step 3: Assembly of the phone

1. Make sure all plumes are tightly connected.

2. secure the back cover (if removed).

3. Turn on the phone and test all screen functions.

πŸ’‘

The most common mistake when self-replacement is damage to the battery plume or display. If the phone does not turn on after assembly or the screen flashes, check the integrity of the plumes and the density of their connection.

Frequent problems after replacing the display and how to avoid them

Even after professional repairs, there can be problems, and let's look at the most common ones and how to fix them.

Problem.Possible causeDecision
The screen doesn't respond to touch.The sensor plume is poorly connected or damaged.Reconnect the plume or replace it
Yellow/blue on the screenLow-quality matrix or incorrect calibrationReplace the display with a better quality or calibrate in the service
Stripes or artifacts in the imageDamage to the plume or matrixCheck the plumes, if necessary, replace the display
The screen spontaneously pressesPoor display fixation or pollution under the sensorReinstall the screen, clean the surface of dust

⚠️ Note: If after replacing the display Redmi Note 8 began to overheat or quickly discharge, the problem may be damage to the battery or motherboard during disassembly.In this case, you need to immediately disconnect the phone and contact the service - further operation is dangerous!

How to save on the replacement of the display: 5 working ways

Replacing the screen isn’t the cheapest procedure, but there are ways to reduce costs without compromising quality.

1. Buy the parts yourself

Many workshops charge 30 to 50 percent for the display, and if you find and buy a part yourself (like on AliExpress or a trusted store), repairs are cheaper, and the main thing is to make sure that the master agrees to work with your part.

2.Look for stocks and discounts

Xiaomi’s official services and major workshops often hold promotions:

  • 🎁 10-20% discount on repairs when presenting a check for the purchase of a phone.
  • 🎁 Free diagnostics when ordering repairs.
  • 🎁 Guarantee extension when paying online.

3.Exchange the old display for a discount

Some workshops take broken screens as a cost of repair (especially if the matrix is intact and only the sensor is broken). β‚½.

4.Repair in regional services

In Moscow and St. Petersburg, prices are 20-30% higher than in the regions, and if you have the opportunity, send your phone to a trusted service in another city (many workshops work with sending via SDEC or Russian Post).

5. Check the guarantee or insurance

If the phone is warranty-free and the display crashes due to the manufacturer’s fault (for example, due to a factory defect), repairs can be free, and some banks (Tinkoff, Sber) offer insurance for gadgets when buying in installments – it often covers the replacement screen.

FAQ: Frequent questions about replacing the display on Xiaomi Redmi Note 8

Can you replace the glass, not the entire display?
Technically possible, but impractical. In the Redmi Note 8, glass is glued to the matrix and sensor (technology). OGS β€” Separating layers requires special equipment and often causes damage to the matrix. 90% of the time, it is cheaper and more reliable to replace the entire module.
How long does it take to replace the display?
Depending on the workshop: πŸ•’ Official service: 3-7 days (if spare part is available - 1-2 days). πŸ•’ Private workshop: 1-3 hours (if the display is available). πŸ•’ Independently: 2-4 hours (for beginners).
Why does the camera or speaker not work after the display is replaced?
This is a typical problem in a sloppy disassembly, probably the master has damaged the camera plumes or the speaker: πŸ”§ Return the phone to the workshop to recheck the connection of the plumes. πŸ”§ If the sleeve is broken, it will have to be replaced (cost). ~1 000–1 500 β‚½).
Can I use a phone with a broken display?
Technically, yes, but it's dangerous: ⚠️ Glass fragments can hurt your fingers. ⚠️ A damaged matrix can shorten and disable the motherboard. ⚠️ Dust and moisture will get inside the case, which will lead to corrosion. If the cracks are small and the sensor is working, temporarily seal the screen with transparent tape, but do not postpone the repair for long.
How to check if the original display is installed?
Methods of verification: πŸ” Compare the serial number on the plume with the original (can be found online). 🎨 Check the color rendering – the original has neutral tones, analogues often with a cold or warm tint. πŸ‘† Run the sensor test in the engineering menu (#6484## β†’ Touch Test). πŸ”¦ Light a flashlight on the screen - the original should not be light spots or uneven backlighting.