Xiaomi AirDots wireless headphones (including AirDots Pro, AirDots 3, AirDots models) SE Some of the most popular accessories have become due to the combination of price, sound quality and convenience, but many users have difficulty connecting or re-pairing after resetting. In this article, we will analyze all possible ways to connect with different devices – from Android and iOS smartphones to laptops and TVs, as well as consider typical errors and their solutions.
Feature AirDots - the use of Bluetooth technology 5.0/5.2 profile-enabled A2DP (for sound transmission) and AVRCP (This means that headphones can connect to almost any modern gadget, but the pairing process can vary depending on the device model and firmware version. If you first encounter wireless headphones, don't worry: Our step-by-step instructions will help to avoid common mistakes.
1. Preparation of headphones for pairing
Before you connect Xiaomi AirDots, you need to make sure they are ready to connect. Most pairing problems arise from the wrong state of the headphones or the charging case.
- 🔋 Charge the case and headphones. Make sure the indicator on the case is white or green (depending on the model) - this means a sufficient level of charge. If the indicator is red or flashing, connect the case to charge for 15-20 minutes.
- 🎧 Remove the headphones from the case. They should automatically turn on (white/red LED flashes). If this does not happen, press and hold the touchpad on each earphone for 3-5 seconds.
- 🔄 Reset the previous settings (if the headphones were already paired with another device). To do this, place both headphones back in the case, close the lid, then open it and hold the button on the case for 10-15 seconds until the indicator starts flashing red and white.
If the headphones don't turn on or sync with each other after you've removed the case (for example, only one sound comes in), try forcefully restarting them.
- Place both headphones in the case and close the lid.
- Wait 10 seconds, then open the lid.
- Press and hold the touchpads on both headphones simultaneously for 10 seconds until the lights go out and light up again.
⚠️ Warning: If the headphones are not detected by the device after reset, check if the smartphone is power-saving mode is on - it can block scanning of Bluetooth devices.
2.Pairing with Android-smartphone (Miui, Samsung, Pixel, etc.)
Connecting Xiaomi AirDots to an Android phone is the most common scenario, and the process is slightly different depending on the OS version and shell (for example, the OS version, MIUI Xiaomi or One UI Samsung, but the overall scheme is the same.
Step-by-step:
- Open Settings → Bluetooth on your smartphone and turn on the adapter.
- Remove the headphones from the case - they should automatically go into pairing mode (indicators flash white).
- In the list of available devices, find the name of your model (for example, Mi True Wireless Earphones, Redmi AirDots 3 or the name of your model). LE budgetary).
- Click on the headphone name and confirm the connection.
On Xiaomi devices with MIUI 12+ After you connect, you may receive a notification about the possibility of installing a proprietary application Mi Earphones (formerly Xiaomi Earphones), which allows you to configure the equalizer, check the charge level and update the firmware.
Make sure that Bluetooth is on on your smartphone
Check the charge of headphones and case
Remove both earphones from the case
Remove old paired devices in Bluetooth settings (if any)
Shut down. VPN or energy-saving regimes-->
If the headphones are not determined, try:
- 🔄 Reboot your smartphone and headphones (put them back in your case for 10 seconds).
- 📱 Remove all previously associated devices called AirDots or Mi True Wireless from the Bluetooth Menu.
- 🔧 Update the firmware of headphones through the Mi Earphones app (if available).
AirDots (1st generation)
AirDots Pro / Pro 2
AirDots 3 / 3 Pro
AirDots SE / Youth
Redmi AirDots
Another model-->
3. Connection to iPhone (iOS) and features of the work
While Xiaomi AirDots is optimized for Android, it works well with the iPhone, but there are a few nuances:
- 🍎 There is no support for the Mi Earphones app on iOS, so some features (e.g., equalizer setting) will not be available.
- 🔊 Sound codecs AAC and work correctly, but aptX (if supported by the model) on the iPhone is not used.
- 📱 Mono mode (using a single headphone) may require manual switching in Bluetooth settings.
Instructions for iOS:
- Open the settings → Bluetooth on the iPhone.
- Remove the headphones from the case and wait until they appear in the list of Other devices (the name will be Mi True Wireless...).
- Click on the name and wait for the pairing to be completed.
- If the sound is only in one headphone, return both to the case, then remove them again - they should sync automatically.
On iOS 16.+ after connection in the control panel (control point) → Sound can be switched between headphones and speakers quickly, but the real-time charge level of the iPhone is not always displayed on the iPhone, and you'll need to use third-party apps like Battery Widget.
⚠️ Note: Some AirDots models (such as AirDots 3 Pro) may experience delays in games or video when connecting to an iPhone, due to the audio processing features of iOS. The solution is to enable Low Latency in headphone settings (if supported) or use wired headphones for critical tasks.
4. Laptop interface (Windows, macOS, Linux)
Connecting Xiaomi AirDots to a computer or laptop is almost no different from pairing with a smartphone, but there are specific points for each OS.
Windows 10/11
On Windows, headphones are connected through the settings → Devices → Bluetooth and other devices: an algorithm for action:
- Turn on Bluetooth on your laptop (via the notification panel or settings).
- Remove the headphones from the case and put them in pairing mode (indicators flash white).
- In the Add Device menu, select Bluetooth and find AirDots in the list.
- After connecting, check that in the sound settings (control panel) → Sound) headphones selected as default playback device.
If the sound is interrupted or there is interference, try:
- 🔊 Disable Sound Improvement in the properties of the device (right button on the headphones in Sound) → Properties → Additionally).
- 🔄 Update the Bluetooth adapter driver through Device Manager.
- 📡 Move the headphones closer to the laptop (optimal distance - up to 1 meter).
macOS
On a MacBook or iMac:
- Open System settings → Bluetooth.
- Remove the headphones from the case and wait until they appear in the list.
- Press Connect and confirm the pairing.
On macOS Ventura and later, you may need to allow access to the microphone in System settings → Confidentiality and security → Microphone if you plan to use AirDots for calls.
Linux (Ubuntu, Fedora, etc.)
On Linux, Bluetooth devices typically use blueman or built-in settings to connect, unless the headphones are defined:
- Install pulseaudio-module-bluetooth and blueman packages:
sudo apt install pulseaudio-module-bluetooth blueman- Restart the Bluetooth service:
sudo systemctl restart bluetooth| OS | Typical problem | Decision |
|---|---|---|
| Windows 10/11 | The sound is interrupted. | Turn off "Sound Improvement" in the device settings |
| macOS | The microphone is not working. | Allow access in privacy settings |
| Linux | Headphones are undetectable | Install pulseaudio-module-bluetooth |
| All LAs. | Only one earpiece works. | Reset the headphone settings (hold the button on the case for 15 seconds) |
5. TV connection, Smart TV and other devices
Modern Smart TV (For example, from Xiaomi, Samsung, LG Sony or Bluetooth support Bluetooth headphones, but the process may be different.
Xiaomi TVs (Mi TV, Redmi TV)
On Mi. TV s MIUI TV:
- Open Settings → Bluetooth and Devices → Add the device.
- Remove the headphones from the case and wait until they appear in the list.
- Select AirDots and confirm pairing.
If the TV does not find headphones, update the firmware through Settings → On TV. → Updating the system.
Samsung TVs (Tizen) OS)
Samsung Smart. TV 2018 and newer:
- Press the Source button on the remote, select Connection Guide.
- Go to Bluetooth Audio and follow the instructions on the screen.
Televisions LG (webOS)
Nana LG Smart TV:
- Open the Settings. → Sound. → Sound output → Bluetooth device.
- Select AirDots from the list.
⚠️ Note: Some TVs (especially budget models) may have a delay of up to 200-300 ms. This is due to the peculiarities of audio processing via Bluetooth).
Game consoles (PS5, Xbox, Nintendo Switch)
Unfortunately, PS5 Xbox Series X|The S doesn't officially support Bluetooth headphones directly, but there are workarounds:
- 🎮 For PS5: use a Bluetooth adapter (for example, 8BitDo Wireless USB Adapter 2).
- 🖥️ For Xbox: connect headphones to the controller through a 3.5 mm connector (you need an adapter).
- 👾 For Nintendo Switch: Manual (Bluetooth settings are available in Update 13.0.0).
6. Solving common pairing problems
Even after connecting correctly, Xiaomi AirDots users may encounter errors, and consider the most common ones and how to fix them.
Problem 1: Headphones are not defined by the device
Possible causes and solutions:
- 🔋 Headphones or case discharged → Charge them for 10-15 minutes.
- 🔄 Headphones in the mode of connection to another device → Reset them (hold the button on the case for 15 seconds).
- 📱 Conflict with other Bluetooth devices → Turn off the other gadgets and try again.
- 🛠️ Problem with Bluetooth module of the device → Restart your smartphone/laptop or update your driver.
Problem 2: The sound is only in one headphone
This is one of the most common problems.
- 🔄 Return both earphones to the case, then remove them again.
- 🔊 In Bluetooth settings on your device, delete AirDots and connect again.
- 🛠️ If the problem persists, reset your headphone settings (hold the touch panels on both headphones for 10 seconds).
What to do if the reset does not help?
Issue 3: Persistent communication breakdowns
If the sound is interrupted or the headphones are turned off:
- 📶 Make sure there are no obstacles between the headphones and the device (walls, metal objects).
- 🔋 Check the charge level – at low charge, the connection becomes unstable.
- 🔄 Reconnect the headphones or reset their settings.
- 🛠️ On Android, turn on High Sound Quality in Bluetooth settings (if available).
Problem 4: Headphones are quickly discharged
AirDots standard operating time is 4-5 hours on a single charge (depending on the model).
- 🔊 Turn down the volume – at maximum, the headphones consume much more energy.
- 🎵 Turn off the noise maker (if any) - it increases battery consumption.
- 🔋 Check the case - if it doesn't charge headphones to 100%, the battery may be worn out.
💡
If the headphones start to discharge quickly after updating the firmware, try rolling it back through the Mi Earphones app (if the previous version is available).
7. firmware update and additional settings
The Mi Earphones app (available for Android) not only allows you to customize the sound, but also update the firmware of the headphones.This can solve connection problems, improve communication stability and add new features.
How to update firmware:
- Install the Mi Earphones app from Google Play or AppGallery.
- Connect the headphones to your smartphone.
- Open the application and go to the Firmware Update section.
- If a new version is available, follow the on-screen instructions (usually confirm the update and wait for the process to complete).
The annex is also available:
- 🎛️ Equalizer setting (preset profiles or manual settings).
- 🔊 Low Delay Mode (Useful for Games and Videos).
- 📊 Checking the level of charge of headphones and case.
- 🔄 Reset to factory settings (alternative method).
⚠️ Warning: Don't interrupt the firmware update process! If the headphones turn off during installation, they may stop turning on. In this case, only a forced reset (hold the button on the case for 20 to 30 seconds) or contacting the service will help.
💡
Updating your firmware can significantly improve communication stability and battery life, but only do it when your headphones and case are fully charged (at least 50%).
8. Alternative ways of connection and useful accessories
If a standard Bluetooth connection is not suitable (for example, due to sound delay or incompatibility), consider alternative options:
- 🎧 Bluetooth transmitter with support for aptX LL (For example, creative BT-W5) — Lower latency to 40ms, ideal for gaming and video.
For owners of Xiaomi AirDots 3 Pro or AirDots Pro 2, a wireless charging case will be a useful accessory. It allows you to charge a case without wires using any Qi-compatible charging station.
If you lose your headphones often, consider buying a Bluetooth tracker (like the Xiaomi Mi Smart Tag) that can be attached to your case and track location through the Mi Home app.