How to sync headphones Xiaomi AirDots: full instruction with solutions to problems

Xiaomi AirDots headphones (including AirDots Pro models) 2/3, AirDots Youth and AirDots SE) They are still among the most popular. TWS-The combination of price, sound quality and functionality makes it difficult for many users to first sync or reconnect after reset. In this article, we will analyze all possible ways of connecting, including nuances for different devices (Android, iOS, Windows, MacOS), as well as solve typical problems – from the lack of sound to the “invisibility” of headphones in the list of Bluetooth devices.

AirDots is a Bluetooth 5.0/5.2 protocol that supports AAC and SBC codecs, which provides stable connectivity but requires proper configuration. If you bought used headphones or they were lying around for a long time, you may need to reset to factory settings, we will show you how to do this without risking damage to the device, and you will learn how to check the firmware version and update it if the sync is interrupted due to software errors.

1. Preparation of headphones Xiaomi AirDots for synchronization

Before you first connect, you need to make sure that the headphones are charged and paired, and even if you took them out of the box, the battery could run out during storage.

• 🔋 Connect the case to the power source (USB-C or wireless charging, depending on the model, for 10-15 minutes, the indicator on the case should burn red (charged) or white (fully charged).
• 🎧 Take both earbuds out of the case - they must automatically turn on (red/white LED flashes).If one of the headphones doesn't respond, place it back in the case for 5 seconds, then remove it again.
• 🔄 Make sure the headphones aren't connected to other devices.If they've been paired with a phone or laptop before, remove them from the list of Bluetooth devices on that device.

If the headphones are not lit or flashing red light, this indicates a discharge. Charge the case to 100% (about 1-1.5 hours), then try again. For AirDots Pro 2 and later, check that the case closes with a characteristic click - incomplete closing can interrupt charging.

💡

If the headphones don't turn on after charging, try resetting them by holding the button on the case for 15-20 seconds until red and white lights flash, which often solves problems with "frozen" firmware.

2. Synchronization with Android-smartphone (Miui, Samsung, Google Pixel, etc.)

Connecting to Android devices is usually the fastest thanks to native support for A2DP and AVRCP profiles.

1. Open Settings → Bluetooth on your phone and activate the module.
2. Take both earbuds out of the case. On the right earbud (AirDots, AirDots Youth) or on the case (AirDots Pro), hold the pairing button for 3-5 seconds until the indicator flashes white and red alternately.
3. The list of available devices will appear Mi True Wireless Earphones (or similar name with the model).
4. Confirm pairing. Some phones may need to allow access to contacts or microphones, which is normal for voice assistant functions.

Once you've successfully connected, Bluetooth status will show up Connected for media and calls. To check stereo, play any song -- it should come from both headphones. If only one sounds, see Problem Solving.

The sound comes from both headphones | Indicators are on white (do not blink) | Headphones are displayed in the Bluetooth list as "Connected" | The microphone is working (check with voice message)

-->

Features for Xiaomi smartphones: If you have a phone on MIUI 12/13/14, after connecting, a notification will appear about the possibility of installing a proprietary application Mi Earphones.

• 🎛️ Equalizer and sound mode settings (Bases)+, Voice).
• 🔋 Display the charge level of the case and each headphone separately.
• 🔄 Firmware updates (relevant to AirDots Pro) 2/3).

AirDots (1st generation)|AirDots Pro 2|AirDots 3 Pro|AirDots Youth|AirDots SE|Another model-->

3. Connection to iPhone (iOS) and features of the work

While Xiaomi AirDots is optimized for Android, it also works well with iPhones (iOS 12 and later).

• 🍎 In the list of Bluetooth devices, headphones can be displayed as LE-BT-... Or Mi Basic... that's normal.
• 🔊 The iPhone will not display the charge level of the headphones (only the status "Connected").
• 🎵 AirDots Pro models may not be running Low Latency mode (low latency) as iOS does not support the aptX codec.

Step-by-step:

1. Open the settings → Bluetooth on the iPhone.
2. Hold the button on the case or right earpiece until white/red flashes.
3. In the list, find a device called Mi... and tap it.
4. Wait for the status of Connected. If the sound is only on one earphone, reboot Bluetooth on the iPhone (turn off / turn on the module).

For AirDots 3 Pro and later, after connecting to the iPhone, you may need to manually switch audio mode (for example, to listen to music or calls), this can be done by double tapping on the earpiece (default setting).

4. Synchronization with PC (Windows 10/11) and MacOS

Connecting to computers is often difficult due to conflicts between Bluetooth drivers or outdated protocols.

Windows 10/11

If your PC is equipped with a Bluetooth 4.2 or newer, there will be no problems. Older adapters (such as Bluetooth 4.0) may need to update drivers:

1. Press Win + I, select Devices → Bluetooth and other devices.
2. Activate Bluetooth and press Add Device → Bluetooth.
3. Put AirDots in pairing mode (blinking white/red light).
4. Select Mi True Wireless from the list... and wait for the connection.

If the headphones are connected, but the sound is interrupted or only goes to one headphone:

• 🔄 Reboot the Bluetooth adapter in Device Manager (find it in Bluetooth, right-click). → Turn off the device, then turn it back on).
• 🔊 To the control panel. → Sound check that AirDots are selected as the default device to play.
• 📥 Update the Bluetooth driver via Device Manager or from the adapter manufacturer’s website.

MacOS (MacBook, iMac)

On Apple computers, the process is simpler:

1. Open System settings → Bluetooth.
2. Hold the button on the case until the indicator flashes.
3. In the list, find AirDots and click Connect.

Important: On MacOS Ventura and later, you may need to allow microphone access in System Settings → Privacy & Security → Microphone, otherwise the headphones won’t work for calls.

5. Solving synchronization problems

💡

90% of problems with AirDots connection are solved by resetting headphones or updating the firmware.

If the headphones are not connected, the sound goes only to one channel or the connection is constantly broken, use this instruction:

Reset to factory settings:

1. Place both headphones in the case and close the lid.
2. Open the lid and hold the button on the case for 20 seconds until the indicator starts flashing red and white alternately.
3. Close the lid, wait 10 seconds and reconnect.

💡

If the reset didn't work, try connecting the headphones to another device (like a second phone).If they work there, the problem is settings on your main gadget.

⚠️ Warning: Do not use metal objects (clips, needles) to reset - this can damage the button on the case.

6. Update firmware and Verification

Outdated firmware can cause synchronization problems, especially after an OS update on the phone.

1. Install the Mi Earphones app (available for Android on Google Play).
2. Put the headphones on the phone.
3. Open the application and go to About device or Settings (depending on the version of the software).
4. If you have an update, follow the instructions on the screen. Don't interrupt the process. The headphones should be near the phone and the case should be open.

Up-to-date firmware versions for popular models (June 2026):

• AirDots Pro 2: 2.7.1.0 or later
• AirDots 3 Pro: 3.5.8.0 (with LC3 codec support)
• AirDots Youth: 1.4.0.6

⚠️ Warning: If during the firmware update, the indicator on the case goes out and the headphones stop responding to the buttons, place them on charging for 30 minutes.

7. Alternative ways of connecting (for experienced users)

If standard methods don’t work, try these options:

• 🔌 Cable Connection: Some AirDots Pro models support wired PC connection via USB-C (This will help update the firmware if Bluetooth is not working.
• 📱 Using a second device: Connect the headphones to another phone, then "forget" them and try pairing with the main gadget again.
• 🛠️ Manual Driver Installation (for Windows): If the headphones are defined as Unknown Device, download the Qualcomm driver QCC30xx (chipset used in AirDots from the manufacturer's website.

For AirDots 3 Pro and later, there is an undocumented forced reconnect function:

1. Get the headphones out of the case.


2. Press the case button three times quickly (interval <1 sec).




3. the indicator should flash blue - now the headphones are ready for a new pairing.

8. Frequent Questions (FAQ)