How to reset Xiaomi Mi True Wireless Earphones 2 to factory settings: full instruction

Xiaomi Mi True Wireless Earphones 2 wireless headphones have become a popular choice thanks to a combination of high-quality sound, compactness and affordable price. However, even such devices periodically fail: connection problems to the smartphone, out-of-synchronous work of the left and right earphones, or sudden interruptions in playback, in 80% of cases these problems are solved by a complete reset to factory settings - a procedure that returns the device to its original state, as after purchase.

In this article, we will detail when a reset is required, how to perform it correctly (including hidden nuances that are not mentioned in the official instructions), and what to do if the headphones refuse to reset in the standard way, and learn how to avoid typical errors that can lead to a final breakage of the device.

When do you need to reset Xiaomi Mi True Wireless Earphones 2?

Factory reset is a last resort only for serious malfunctions, and here are the key situations where the procedure is warranted:

• 🔗 Headphones do not connect to the phone – the device is determined in the Bluetooth list, but the connection is constantly reset or accompanied by an error “Can not connect".
• 🎧 The left and right headphones don’t sync — one doesn’t play sound, or both work independently (e.g., the left side plays music and the right side doesn’t).
• 🔊 Constant cliffs of sound – even with a stable Bluetooth connection, the sound is interrupted every 5-10 seconds.
• 🔄 Failures after firmware updates – if the headphones stopped working correctly after an automatic update through the Mi Home app.
• 📱 Multi-device conflict: Headphones have “remembered” too many gadgets and refuse to connect to a new one.

It is important to understand that resetting will not help if the problem is related to physical damage: for example, if one of the headphones does not turn on after a fall or moisture, in such cases repair or replacement is required.

⚠️ Note: If Xiaomi Mi True Wireless Earphones 2 headphones were connected to your Mi Account via the Mi Home app, the reset will remove this binding.

Preparation for resetting: what to do in advance

Before you start resetting, follow a few mandatory steps to avoid additional problems:

1. Check the battery — the headphones should be charged at least 30%. If the charge level is lower, connect them to the case for 10-15 minutes. Resetting when the battery is discharged can lead to permanent damage to the firmware.
2. Disconnect from all devices – remove Xiaomi Mi True Wireless Earphones 2 from the list of conjugate gadgets in the Bluetooth settings on your smartphone, tablet or laptop. This will prevent automatic connection during reset.
3. Use the original case -- if you have a non-original case, the procedure may not work. Cheap analogues often don't transmit the correct signals to reset.
4. Prepare an alternative sound source – after reset, the headphones will lose all equalizer settings. Prepare screenshots of current settings in the Mi Home app (if you use).

If you've previously configured control gestures (like double-tapping to switch tracks), you'll also have to configuring them again.

Standard Resetting Method: Step-by-step Instructions

The official method of resetting Xiaomi Mi True Wireless Earphones 2 involves the use of physical buttons on the headphone case.It is important to follow the instructions accurately, as improper actions can lead to the device freezing.

Here's the algorithm:

1. Place both headphones in the case and close the lid. Wait 5 seconds until the lights go out (this means the devices are completely off).
2. Open the case cover and pull out both earbuds. They'll automatically turn on.
3. Press and hold the touchpads on both headphones simultaneously for 15 seconds, you will hear a beep, after which the indicators will flash red and white.
4. Continue holding for another 5 seconds until the second signal (longer) sounds.
5. Close the case cover and wait 10 seconds. The headphones have reset.

If done correctly, the next time you connect to the phone Xiaomi Mi True Wireless Earphones 2 will be defined as a new device (in the list of Bluetooth will appear the record “Mi True Wireless Earphones 2” without reference to previous gadgets).

⚠️ Warning: Don't interrupt the procedure after the first beep! Many users release the buttons too early, which causes the reset to be delayed. Wait for the second long squeak is a confirmation of a successful reset.

Alternative discharge methods

If the standard method didn't work, try one of the alternatives, which is less reliable, but sometimes helps when the headphones are "hanging" during the reset phase.

Method 1: Resetting through the Mi Home app

This method is suitable if the headphones are somehow determined by the phone, but work incorrectly.

1. Open the Mi Home app and go to Profile → My Devices section.
2. Find Xiaomi Mi True Wireless Earphones 2 in the list and tap them.
3. In the upper right corner, press three dots (⋮) and select the device settings.
4. Scroll down and select Reset Settings (or Remove Device if the Reset option is not available).
5. Confirm the action and wait for the process to be completed.

After that, the headphones will be removed from the Mi Account and you can reconnect them.

Method 2: Forced discharge through the case

This option is used if the headphones do not respond to touch, but are charged in a case.

1. Place both headphones in the case and close the lid.
2. Connect the case to the power source (charger or Power Bank).
3. Press and hold the button on the back of the case for 20 seconds.
4. Release the button when the indicators on the case start flashing red and white.
5. Get the headphones out of the case - they should automatically reboot.

This method does not work on all firmware versions, but in 30% of cases it helps to “reanimate” the frozen devices.

Frequent Resetting Mistakes and How to Avoid Them

Many users make the same mistakes that make the reset fail or cause new problems, and the most common ones are:

• ⏱️ Insufficient button retention time - as mentioned, you need to wait for the second long signal. If you release it earlier, the reset will not end.
• 🔋 Battery discharge – at a charge level below 10%, the headphones may freeze during the reset process.
• 📱 Automatic phone connection — if the headphones are left on the Bluetooth list, they may try to connect during the reset, which will interrupt the process!
• 🔄 Using a non-original case -- cheap ones often don't transmit the correct signals to reset. If the standard method doesn't work, try the original case.
• 🎛️ Mechanical damage to the touch panels — if the membranes are damaged, the headphones will not be able to recognize prolonged pressing.

Another common mistake is to try to reset just one earpiece, and the procedure has to be done on the left and right side simultaneously, and if you drop only one, the synchronization between the two will be disrupted.

💡

If your headphones still don’t work after reset, try updating your firmware through the Mi Home app. Sometimes the crashes are caused by an outdated version of the software, not hardware problems.

What if the reset didn't help?

If after several reset attempts, Xiaomi Mi True Wireless Earphones 2 headphones still don’t work properly, the reasons may be deeper:

• 🔧 Firmware damage -- in this case, only flashing through the service center will help.
• 🔌 Bluetooth module malfunction – if the headphones are not detected by any device, the problem may be in the hardware.
• 🔋 Battery wear - when the battery is discharged or bloated, the headphones can behave unpredictably.
• 📡 Interference from other devices – sometimes connection problems are caused by conflict with other Bluetooth gadgets (such as smart watches or speakers.

If you suspect a hardware malfunction, contact Xiaomi’s authorized service center. In case of software failures, you can try the following steps:

1. Update the firmware through the Mi Home app (if the headphones are at least somehow defined).
2. Try connecting to another device (like a tablet or laptop) to rule out a smartphone problem.
3. Do a network reset on your phone – sometimes conflicts arise from a Bluetooth cache.

⚠️ Warning: If the headphones after reset start to emit a constant high-frequency squeak or do not turn on at all, this is a sign of a critical firmware failure. Further attempts to repair yourself can lead to complete loss of performance.

💡

If the reset doesn’t solve the problem, check the hardware integrity of the device (body, contacts, battery) first, and then start software recovery methods.

How to Restore Settings After Resetting

After a successful reset, Xiaomi Mi True Wireless Earphones 2 headphones will return to factory settings.

• 🔗 They will be displayed as a new device in the Bluetooth list.
• 🎵 All user settings of the equalizer will reset.
• 👆 Control gestures (touching) will return to standard values.
• 🔋 Time of use statistics in the Mi Home application will be reset.

To return individual settings, follow the following steps:

1. Connect your headphones to your phone via Bluetooth (no password required).
2. Open the Mi Home app and add the device again (unless it is automatically determined).
3. Personalize gestures in Settings → Touch management. For example, you can set up a double touch to switch tracks.

If you saved screenshots of your settings before reset, use them for quick setup, and pay attention to the Auto Shutdown feature in the settings, which saves battery power if the headphones are not used for a long time.

FAQ: Frequent questions about resetting Xiaomi Mi True Wireless Earphones 2