How to reset the headphone settings Xiaomi True Wireless Earbuds: all ways

Xiaomi True Wireless Earbuds (including the Redmi AirDots, Buds, FlipBuds, and others) sometimes require a complete reset, which may be necessary if the device has stopped connecting to the phone, malfunctions, left and right earbuds do not sync, or after updating the firmware, errors appear. The reset procedure returns the headphones to factory parameters, removing all the associated devices and user settings.

In this article, you will find all the current ways to reset for different Xiaomi models, including instructions through the Mi Earphones mobile application, a physical button on the case, as well as solutions for cases when the headphones do not respond to standard methods (for example, after a failed update or mechanical damage to the contacts).

When you need to reset Xiaomi TWS settings

Factory reset is a last resort, but in some situations it becomes the only working solution.

• 🔌 Headphones do not connect to a phone or computer, although previously worked properly.
• 🔄 The left and right earphones are not synchronized with each other (one of them does not reproduce sound).
• 🔊 There was interference, cracking or intermittent sound not related to the source of the signal.
• 📱 After the firmware update, headphones are not defined in the Mi Earphones app.
• 🔋 Battery discharges too quickly, although previously held the charge longer.
• 🛠️ Headphones are frozen (do not respond to touch, do not turn off).

It is important to understand that a reset will not fix hardware problems, such as if one of the speakers is out of order or the control board is damaged, and in such cases, repair or replacement of the device will be required, but in 80% of cases, a software reset solves problems related to malfunctioning of the firmware or pairing conflicts.

⚠️ Note: If Xiaomi headphones are not turned on at all (the indicators do not burn, do not respond to charging), first check the serviceability of the case and cable.

Method 1: Reset via Mi Earphones (official method)

Xiaomi’s most reliable and recommended method is to use the Mi Earphones app (formerly Mi Bluetooth Audio), which is suitable for most models, including the Redmi AirDots 3 Pro, Xiaomi Buds 4/5, FlipBuds Pro and others, the main condition is that the headphones must be connected to the phone at least briefly.

Step instructions:

1. Install the Mi Earphones app from Google Play or the App Store.
2. Connect the headphones to your phone via Bluetooth (if they appear in the list of devices).
3. Open the app and wait for it to determine your model.
4. Go to Settings (the pin pin pin icon in the upper right corner).
5. Select Reset or Reset factory settings (the wording may vary depending on the version of the application).
6. Confirm the action – the headphones will reboot and return to factory parameters.

Once reset, the headphones will automatically disconnect from all devices and have to be paired again, and some models (such as the Buds 5 Pro) may require additional confirmation on the phone itself.

Make sure your headphones are charged (minimum 30%)

Disconnect them from other devices (PC, tablet)

Close background applications that use Bluetooth

Stay within 1 meter radius of the phone-->

⚠️ Note: If there is no reset button in the Mi Earphones app, upgrade to the latest version.

Method 2: Hardware reset via a button on the case (for most models)

If the headphones are not connected to the phone or the app can’t see them, you can perform a hardware reset using a physical button on the charging case.This method works for most Xiaomi/Redmi TWS models, including:

• 🎧 Redmi AirDots (all generations including Pro and AirDots) SE)
• 🎧 Xiaomi Buds 3/4/5 (including Pro and Lite)
• 🎧 Xiaomi FlipBuds (all versions)
• 🎧 Xiaomi Air 2/3

Step-by-step:

1. Put both headphones in the case and close the lid.
2. Connect the case to a power source (charging or Power Bank) is a prerequisite for some models.
3. Press and hold the button on the case (usually side or back) for 10-15 seconds.
4. The indicators on the case and/or headphones will start flashing red and white (or only white, depending on the model).
5. Release the button, reset is complete. The headphones automatically reset.

You can then remove the headphones from the case and pair them with the phone again, and if the lights don't flash, try repeating the procedure by holding the button for longer (20-25 seconds).

Method 3: Reset via touch combination (for touch-controlled models)

Some Xiaomi TWS models (such as the Buds 5 Pro or FlipBuds 2) support reset via the touchpads on the headphones themselves, a method that is useful if the case is damaged or the button is not working.

Instructions:

1. Get both earphones out of the case.
2. Press and hold the touchpads on both headphones simultaneously for 10-15 seconds.
3. Wait until the indicators start flashing red and white (or make a beep).
4. Let your fingers go, the headphones will reset.

Then you can pair them with your phone as new ones, and if you don't reset, repeat the procedure, holding the panels for longer (20 seconds).

⚠️ Note: On models with active noise reduction (ANC) Resetting through sensors may not work if the function ANC Turn it off beforehand (if the headphones are still connected to the phone).

💡

If the headphones don't respond to touch, check to see if Ignore Touch mode is enabled in the Mi Earphones app settings, which disables touch control to prevent accidental taps.

Method 4: Reset via ADB (Advanced Method for Android)

If standard methods did not help, and the headphones still do not work correctly, you can try resetting through the ADB-Android Debug Bridge, which requires permission to debug. USB on the phone and is only suitable for users with Android experience SDK.

Step-by-step:

1. Connect your phone to your computer and enable USB debugging in the developer settings.
2. Install ADB Tools on your PC.
3. Open the command line (Windows) or terminal (macOS/Linux) and type:

adb devices

Make sure your phone is displayed on the list of devices.

adb shell am start -n com.xiaomi.bluetooth/.device.BluetoothDeviceResetActivity

This team will open a hidden Bluetooth device reset menu on Xiaomi phones.

1. In the window that appears, select your headphones from the list.
2. Confirm the reset – the device will be removed from the phone’s memory and its settings reset.

Then try reconnecting the headphones, which helps when the problem is in Bluetooth stack conflicts, not the headphones themselves.

💡

Resetting through ADB removes the headphones not only from the list of devices, but also resets their cache on the Android system.This can help if the standard uncoupling doesn't solve the problem.

What to do if the reset does not help

If the headphones still don’t work after reset, the problem may be related to:

• 🔋 With a discharged battery – try charging the case and headphones for 1-2 hours.
• 📱 Incompatible firmware – check for updates in the Mi Earphones app.
• 🛠️ Hardware malfunction – damage to the speaker, microphone or control board.
• 🔌 Bluetooth problems on your phone – try connecting your headphones to another device.

If the headphones are not turned on at all (the indicators do not burn, do not respond to charging), follow the following steps:

1. Check the case for mechanical damage or oxidation of contacts.
2. Try charging the case from another cable or power supply.
3. Leave the headphones in the case on charging for 12-24 hours - sometimes a deep discharge of the battery blocks the onset.
4. If nothing helps, contact Xiaomi’s service center – you may need to replace your battery or board.

For models with removable fittings (such as Buds 5 Pro), check if moisture or dust has fallen under the speaker's grid. Clean it carefully with a soft brush or compressed air.

How to avoid problems after resetting

After successfully resetting your Xiaomi headphones, follow these guidelines to avoid repeated crashes:

• 📲 Update your firmware through the Mi Earphones app to the latest version.
• 🔄 Combine headphones with only one device – frequent reconnections to different gadgets can cause conflicts.
• 🔋 Do not discharge headphones "to zero" - try to put them in the case at a charge level of 20-30%.
• 🚿 Avoid moisture, even if the model has protection. IP54/IPX4, Prolonged exposure to water or steam can damage electronics.
• 📦 Keep your headphones in a case – this protects them from dust and mechanical damage.

If you use headphones with multiple devices (like a phone + laptop), turn off Bluetooth on one gadget before connecting to another. This prevents pairing conflicts that often lead to crashes.

💡

For active noise cancellation (ANC) models, after reset, microphone recalibration may be required. Go to the Mi Earphones app and perform the ANC setup procedure as instructed.

FAQ: Frequent questions about Xiaomi TWS reset