Reset Xiaomi Mi Band 2 to factory settings: 5 proven ways

Xiaomi Mi Band 2

factory-setting

Mi Band 2

5 Ways to Reset Yourself

Unlike the newer models (Mi Band 5/6/7), the second version of the bracelet has no touch screen, which makes it difficult to navigate the menu. Here it is important to understand: a full reset erases all data - steps, pulse, alarm settings and binding to the Mi Account. If you do not back up in advance, it will be impossible to restore activity history. In this article, we will analyze all working methods, including hidden combinations of buttons, reset via the Mi Fit application and even recovery from the "brick" (when the bracelet does not respond at all).

We'll focus on common errors, like many users confusing a soft reboot (just turn off/on) with a hard reset (complete deletion of data), the first option helps with minor glitch, but doesn't solve firmware or synchronization problems, and we'll also understand why the bracelet might not connect to the phone after a reset and how to fix it without going to the service center.

If your Mi Band 2 is stuck on your logo, doesn't respond to touches or shows incorrect data, don't rush to throw it away. 90% of the time, the device can be brought back to life on its own by following our instructions. And for those who plan to sell or transfer the bracelet to another person, we have prepared a safe reset checklist to keep your personal data out of the wrong hands.

1.When do I need to reset the Xiaomi Mi Band 2?

Not every failure requires a complete flashing. Before you start resetting, make sure the problem is serious. Here are the key signs that your bracelet needs a clean installation:

• 🔄 The bracelet got stuck on the Mi logo after updating the firmware and does not respond to the button.
• 📱 Not synced with your phone via Mi Fit or Zepp Life, despite reinstalling the app.
• 🚫 The bracelet is not defined as a new device when trying to be tethered to another phone.

Another common case is preparing to sell: If you transfer the Mi Band 2 to another person, be sure to reset to remove the link to your Mi Account, otherwise the new owner will not be able to use the bracelet to its fullest extent (for example, notifications or data synchronization will not work).

However, there are situations where resetting will not help:

• 💧 Getting moisture inside the body (in this case, you need drying or repairs).
• 🔋 Battery bloating (visually noticeable by deformation of the body).
• 📶 Problems with the phone's Bluetooth module (check on another device).

⚠️ Warning: If the bracelet doesn't turn on at all (no vibration, no charging indicator lights), check the cable and power supply first.Mi Band 2 requires an original charger with magnetic contacts - the usual one USB-cable won't fit.

2. Method 1: Reset via the Mi Fit application (the safest)

This is a good method if the bracelet is connected to the phone and responds to commands, the advantage is that all data can be stored in the Mi Account cloud before being reset.

Step instructions:

1. Open the Mi Fit app (or Zepp Life if you use it).
2. Go to the Profile section → Mi Smart Band 2.
3. Scroll down and select Untie the device.
4. Confirm the action - the bracelet vibrates and reboots.
5. After the reboot, return to Profile → Add the device and re-attach the Mi Band 2.

If the option to untie the device is missing, try an alternative path:

Settings (cog in the upper right corner) → Devices → Mi Smart Band 2 → Delete

Important: After untieing the bracelet will save some settings (for example, alarm clocks), but will lose the binding to the account. For a complete reset, also perform a hardware reset (mode 3 or 4).

Synchronize data with the cloud

Record the current alarm clock settings

Check the firmware version (in bracelet settings)

Make sure your phone is connected to the internet-->

⚠️ Warning: If the bracelet is not defined as a new device after unbundling, remove it from the phone's Bluetooth settings list manually (Settings) → Bluetooth → Mi Band 2 → Forget the device).

Method 2: Soft reset (if the bracelet is getting stuck)

If the Mi Band 2 doesn't respond to touch, but the charging indicator is on, try a soft reboot.This method doesn't erase data, but often solves freeze problems.

How to do this:

1. Connect the bracelet to the charger.
2. Press and hold the touch button (the only button below the screen) for 10-15 seconds.
3. Wait for the vibration and the appearance of the Mi logo - this is a signal of a successful reboot.

If the bracelet does not vibrate, try an alternative:

• 🔌 Turn off the charger.
• 🖐️ Press the button 20 times in a row (with intervals) ~1 second).
• 🔄 After 20 pressing, hold the button for another 5 seconds.

This method helps in 70% of cases of hanging, but if the bracelet does not turn on at all, go to a hard reset (method 4).

💡

If the bracelet shows the wrong time after rebooting, sync it with your phone: open Mi Fit, go to Profile → Mi Band 2 → Sync data

Method 3: Hard reset via button (complete deletion of data)

This method erases all settings and returns the bracelet to factory condition.

• 📱 The bracelet is not synchronized with the phone.
• 🔄 The soft reboot didn't help.
• 🆕 You're preparing the device for sale.

Step-by-step:

1. Turn off the bracelet from charging (if connected).
2. Press and hold the touch button for 20-25 seconds.
3. After ~10 seconds, the bracelet vibrates - don't let go of the button!
4. Wait for the second vibration (in 10-15 seconds) is a signal of a successful reset.
5. Release the button. The bracelet will reset and show the Mi logo.

Once reset, the bracelet will be like a new one, you need to re-link it to your account via Mi Fit. If the device is not identified, check:

• 📲 Bluetooth is on on the phone.
• 🔄 There are no other bracelets in Mi Fit.
• 📥 The latest version of the application has been installed.

⚠️ Note: Some Mi Band 2 firmware only works hard reset when the charger is connected. If the button does not respond, connect the bracelet to the charger and repeat the procedure.

5. Method 4: Firmware reset (if the bracelet is "bricked")

If the Mi Band 2 doesn’t turn on, vibrate or respond to the button, the firmware may be damaged, in which case the firmware will help to flash through the official Mi Fit software or third-party utilities (for example, Mi Band 2 Tool).

Official method (via Mi Fit):

If the official method didn’t work, use the manual firmware via Mi Band 2 Tool (requires a Windows PC):

1. Download the utility with XDA Developers (look for the Mi Band 2 Tool theme).
2. Connect the bracelet to charging and start the program.
3. Select the Flash Firmware option and specify the path to the firmware file (download the latest version from the official website).
4. Wait for the process to be completed (the bracelet vibrates and reboots).

Critical: Don't turn off the bracelet from charging while firmware! interrupting the process can turn the device into a "brick."

6. Method 5: Reset via another phone (if not connected to the main one)

If the Mi Band 2 isn’t detected on your phone but is responsive to taps, try linking it to another device, which will help bypass cache errors or Bluetooth conflicts.

How to do this:

1. Take a second phone (Android or iOS) and install Mi Fit on it.
2. Register a new Mi Account (or sign in to an existing one).
3. In Mi Fit, click Add Device → Mi Smart Band 2.
4. Follow the instructions on the screen. If the bracelet is not in place, perform a hard reset (method 4) and try again.
5. After successfully binding, untie the bracelet from the second phone and return to the main one.

This method often helps if the problem lies in your main phone’s Bluetooth settings, such as some Xiaomi or Samsung models blocking the connection to the wristband due to optimizing power consumption.

7.What to do after resetting: setting from scratch

After a successful reset, Mi Band 2 needs to be reconfigured, and here is a step-by-step checklist to keep the important points in mind:

• 📱 Install the latest version of Mi Fit or Zepp Life (for the first time) Android/iOS).
• 🔄 Link the bracelet to your Mi Account (use the same account if you want to recover data from the cloud).
• ⏰ Set up automatic time synchronization in bracelet settings.
• 🔔 Activate notifications for calls and messages (allow access in phone settings).
• 🏃‍♂️ Turn on step tracking, sleep and pulse (may be disabled by default).
• 🔋 Check the charge level – after reset, the bracelet may discharge faster due to background processes.

If you recover data from the cloud, wait until full sync (may take up to 10 minutes) and note that the steps and sleep history of the past 30 days is saved, but the alarm clock and activity targets settings are reset.

Typical errors after reset and their solution:

• 📵 The bracelet does not vibrate at notifications → Check the settings in Mi Fit → Notifications and permissions for application in the system.
• 🕒 Wrong time. → Synchronize manually through Profile → Mi Band 2 → Synchronize time.
• 🔋 Fast discharge. → Perform 2-3 full charge cycles (0% to 100%) to calibrate the battery.

💡

After reset, be sure to update the bracelet firmware to the latest version - this will fix most bugs and improve the stability of the work.

8.Frequent questions about resetting Xiaomi Mi Band 2