How to reset the headphone settings Xiaomi: 4 working ways for all models

Xiaomi headphones are some of the most popular wireless gadgets on the market due to their combination of price, sound quality and functionality. However, even the most reliable technology sometimes fails: the headphones stop connecting to the phone, one of them does not work, the sound is interrupted or there are problems with touch control, in 80% of cases these problems are solved by a complete reset to factory settings.

In this article, we’ll look at all the current reset methods for different Xiaomi models, from budget Redmi Buds to flagship Mi True Wireless Earphones. You’ll learn how to bring headphones back to life without going to the service center, even if they don’t respond to buttons or are not determined by the phone.

When you need to reset the headphones Xiaomi

Resetting to factory settings is a last resort, but sometimes it is necessary. Here are the key symptoms for which the procedure is mandatory:

• 🔌 Headphones do not connect to a phone or PC, although they used to work stably.
• 🔊 The sound is interrupted, distorted or lost in one of the headphones.
• 🎧 One of the headphones (usually the right one) does not turn on or sync with the left one.
• 🔄 Touch control does not respond to touch or is triggered arbitrarily.
• 📱 Mi Home or Xiaomi Earphones mobile app shows a connection error.
• 🔋 The battery is discharged too quickly (if previously this was not observed).

It is important to understand that resetting will not help if the problem is related to physical damage: oxidation of contacts in the case, mechanical damage to the speaker or a discharged battery.

⚠️ Note: If Xiaomi headphones don’t turn on at all (the lights don’t burn, don’t respond to charging), check the charger and cable first. USB-C case.

Preparation for resetting: what to do in advance

Before you reset your settings, follow a few mandatory steps to avoid additional problems:

1. Check the battery. Make sure the headphones and case are at least 30 percent charged. Resetting at low charge can make it impossible to turn on any further.
2. Turn off the headphones from all devices. Forget them in the Bluetooth settings on your phone, tablet, and computer.
3. Remove the headphones from the Mi Home app. If they were tied there, removing them will help avoid conflicts when reconnecting.
4. Prepare an alternative control method. Some models may need to reset their touch gestures after resetting.

If you have an ANC (active noise reduction) model, like the Xiaomi Buds 4 Pro, you’ll have to reset the feature through the app, and the same goes for equalizers and audio profiles.

Make sure the headphones are charged|Disconnect from all devices via Bluetooth|Remove from the Mi Home app|Prepare instructions for your model-->

Method 1: Reset via a button on the case (for most models)

This is the most versatile method, which works on 90% of Xiaomi headphones, including Redmi Buds 3/4, Mi True Wireless Earphones 2/3 and others.

Step-by-step:

1. Open the case cover and hold the reset button (usually located on the back of the case) for 10-15 seconds.

If the button doesn't respond, try holding it for longer (up to 20 seconds) or check if the charging connector is dirty. On some models (such as the Xiaomi Buds 3T Pro), the reset button is hidden under a silicone plug - it needs to be carefully tampered with.

💡

If the headphones don't connect after reset, try connecting them to another device (like a tablet) first. Sometimes the problem lies in the Bluetooth cache on the main phone.

Method 2: Reset through multiple pressing on headphones

If the button on the case is missing or not working, you can reset the settings directly through the headphones themselves. This method is suitable for models without a physical reset button, such as Xiaomi AirDots or Redmi AirDots 2.

Algorithm of action:

1. Remove both earphones from the case.
2. Press and hold the touchpads on both headphones simultaneously for 10 seconds.
3. The indicators will flash red, then white, which means that the reset was successful.
4. Place the headphones back in the case, close the lid and wait 1 minute.
5. Take out your headphones and try to connect again.

If the headphones don’t respond to touch, try an alternative way:

• 🔋 Completely discharge the headphones (leave on until turned off).
• 🔌 Charge them in the case to 100%.
• 🔄 Repeat the reset procedure through the touch panels.

⚠️ Note: On models with hybrid ANC (For example, Xiaomi Buds 3 Pro) after reset may require recalibration of microphones.

Method 3: Reset via Mi Home (for supported models)

Some Xiaomi models allow you to reset your settings software through the official Mi Home app or Xiaomi Earphones. This method is the most secure, but does not work on all devices.

Instructions:

1. Install the Mi Home app (for Android – Google Play, for iOS – App Store).
2. Connect the headphones to the phone via Bluetooth.
3. Open the app, find your headphones in the list of devices and go to their settings.
4. Select Reset or Reset factory settings (the name may vary).
5. Confirm the action and wait for the process to be completed.

If the app does not have a reset option, try:

• 📱 Update the headphone firmware (if available).
• 🔄 Reconnect the headphones to another device and try again.
• 🗑️ Remove the headphones from the application and add them again.

On Xiaomi Buds 4 and later, resetting via the app may require confirmation via Bluetooth LE. Make sure the phone is enabled with low-power Bluetooth (in Bluetooth settings).

💡

Resetting via the app is the most gentle method, because it doesn't affect the firmware, but it only works if the headphones are defined by the phone.

Method 4: Reflashing headphones (advanced method)

If none of the previous methods worked, it might be the damaged firmware, which would require a complete firmware reflash through the computer, which is suitable for advanced users and requires special software.

What you need:

• 💻 Windows computer 10/11 macOS.
• 🔌 Cable USB-C (case-wire).
• 📁 Firmware for your model (you can download on the forums) 4PDA or XDA Developers).
• 🛠️ Firmware (e.g., Xiaomi Flash Tool or QFil).

Step-by-step:

1. Download the firmware (.bin or.img file) for your model.
2. Connect the case with headphones to the computer via USB-C.
3. Run the firmware program and select the downloaded file.
4. Transfer the case to firmware mode (usually you need to hold the reset button for 10 seconds when USB is connected).
5. Start the firmware process and wait until it is completed (don’t turn off the case!).
6. After successful firmware, disable the case, remove the headphones and reset them (Method 1 or 2).

⚠️ Warning: Incorrect firmware can permanently disable your headphones. Use only official or verified firmware files!

If you are not sure about your skills, it is better to contact the Xiaomi service center. The cost of flashing usually does not exceed 500-1000 rubles.

What to do if the reset does not help

If the headphones are still not working after reset, the problem may be hardware, and here are the possible causes and ways to fix them:

If you suspect a hardware malfunction but don’t want to spend money on repairs, you can try the following steps:

• 🔧 Disassemble the case and check the charging contacts for oxidation (clean carefully with a lasticle or alcohol).
• 🔋 Check the voltage on the battery case multimeter (should be 3.7–4.2V).
• 📡 Try connecting your headphones to another device (like a laptop or second phone).

If headphones are warranty, do not disassemble them yourself - this will void warranty obligations.

FAQ: Frequent questions about resetting Xiaomi headphones