How to Reset Xiaomi Weights Settings: All Ways for 2026 Models

Why you might need to lose weight Xiaomi

The Xiaomi Mi Body Composition Scale has become an integral part of a healthy lifestyle for millions of users, not only measuring weight, but also analyzing body composition, tracking changes and syncing with mobile applications. However, even the most reliable equipment sometimes requires a reboot or a complete reset to factory settings.

Xiaomi may need to reset the weight settings in several cases: when selling the device to a new owner, if the scales began to give incorrect readings, after a failure of synchronization with the Mi application. Fit/Zepp Life, or when the device stopped turning on. In this article, we will discuss all the current ways to reset for Mi Body Composition Scale models. 2, Scale 3 Scale Pro, including hidden features and solution of common errors.

It is important to understand that resetting is not a universal solution to all problems. For example, if the scales show a knowingly wrong weight (different by 5+ kg from the real one), first check the calibration and smoothness of the surface.

Preparation for resetting: what to do in advance

Before you start resetting, follow a few mandatory steps to avoid data loss and make it easier to adjust the scales after the procedure.

• 📱 Sync the data in the Mi Fit or Zepp Life app. Once reset, all the measurement history stored in the balance memory will be deleted. Make sure the latest readings are uploaded to the cloud.
• 🔋 Check the batteries. Install new batteries (4).×AAA for most models), if the scales are not used for a long time.
• 📋 Write down the serial number of the device, which is on the back of the scale and may be needed to re-link to the account.
• 🌐 Disconnect other Bluetooth devices up close, which will prevent conflicts when you reconnect the scales to the phone.

If you’re resetting the scales before selling, be sure to untie the device from your Xiaomi account in the app settings, otherwise the new owner won’t be able to tie the scales to their profile.

⚠️ Note: On Mi Body Composition Scale Pro models, resetting to factory settings also resets calibration data. After the procedure, recalibration using a control load (usually 10 kg) will be required).

Method 1: Resetting through a button on the scales (hardware method)

The most versatile method that works on all Xiaomi models is hardware reset with a physical button.This method does not require a connection to the phone and is applicable even if the scales are not on or synced.

Instructions for Mi Body Composition Scale 2/3/Pro:

1. Turn the scales over and find the reset button (usually located in or near the battery compartment). On some models, the button may be hidden under the sticker.
2. Take a thin object (clip, toothpick) and press the button, holding it for 10-15 seconds.
3. Release the button and wait 30 seconds. The scale should emit an audible signal or flash an indicator.
4. Place the scales on a flat surface and step on them. If the reset is successful, the screen will display 0.0 or ---.

On Scale Pro models, additional calibration may be required after the hardware reset.

1. Include the scales (step on them).


2. Wait for the "CAL" to appear.




3. Place a control load on the scale (10 kg).




4. Wait 5 seconds - calibration complete.

⚠️ Warning: Do not use metal objects (needles, pins) to press the button; this may damage the contacts or the board.

Method 2: Reset via Mi Fit/Zepp Life

If the scales are synced to the phone, the easiest way to reset is through an official app, which saves the measurement history in the cloud, but removes all local device settings.

Instructions for Mi Fit (relevant to 5.6+ versions):

1. Open the app and go to the Profile → Devices section.
2. Select your scales from the list of connected devices.
3. Slap the icon. ⚙️ (settings) in upper right corner.
4. Scroll down and select Reset Settings or Remove Device.
5. Confirm the action. The scales will be untied from the account, and they can be reconfigured.

In the Zepp Life app (for new models), the path is slightly different:

• 📱 Go to the Devices. → Your scales. → Settings (⚙️)
• 🔄 Choose Reset Data or Untie Device
• ✅ Confirm the reset through the pop-up window

Once reset via the app, the scales will automatically reset, you will need to re-associate them to your account, as when you first connected. If the scales do not appear in the list of available devices, turn off and turn on Bluetooth on your phone again.

💡

If the scales are not connected to the phone after reset, try removing them from the list of paired Bluetooth devices in the smartphone settings, and then repeat the binding procedure.

Method 3: Complete factory reset (for power users)

If standard methods don't work, you can do a deep reset that returns the scales to the boxy state, which removes all the data, including the calibration factors, and may require reconfiguration of the sensors.

For the Mi Body Composition Scale 2/3:

1. Hold the reset button for 20 seconds (instead of the standard 10-15).
2. After the beep, immediately press the scales and hold the weight for 5 seconds.
3. Let go – the inscription rSt (reset) should appear on the screen.

For the Mi Body Composition Scale Pro, the procedure is more complicated:

1. Hold the reset button for 15 seconds.


2. After flashing the indicator, quickly press the button 3 times in a row.




3. The scale will emit a double beep - the reset is completed.

After a deep discharge, it may be necessary to:

• 🔧 Recalibration using control cargo
• 📶 Re-association to Xiaomi account
• ⚖️ Setting up units of measurement (kg/pound/walls)

⚠️ Attention: Deep reset on Scale Pro models also resets user profiles (if they were created directly on the scales.

Solving Typical Mistakes After Resetting

Even after a successful reset, users often face problems, and here are the most common mistakes and ways to fix them:

If the scales show LO (low battery) after reset, but the batteries are new, the problem may be oxidized contacts. Clean them carefully with a blower or alcohol. On Scale Pro models, an E3 error often indicates damage to the bioimpedance sensor, in which case repair will be required.

💡

If the scales are unstable after reset, check the batteries and calibration first, and 80 percent of the time, these two things are solved.

How to avoid resetting in the future: prevention of problems

To avoid having to lose weight regularly, follow these recommendations:

• 🔋 Change the batteries every time. 6-8 months, even if the scales are working, the discharged elements can cause failures.
• 📱 Update your firmware through the Mi Fit app when notifications appear. New versions often fix sync errors.
• 🧘 Keep the scales properly: in a dry place, without direct sunlight.
• 🔄 Sync your data regularly with the cloud, which will protect your measurement history in case of possible failures.
• ⚖️ Calibrate the scales every 3 months using a control load (e.g. 10 kg weights).

On Scale Pro models, it is additionally recommended:

• 👣 Measure body composition barefoot – socks or tights distort bioimpedance readings.
• 💧 Avoid measurements immediately after showering or intense exercise (wet skin affects accuracy).
• 🕒 Measurements at the same time of day to accurately track the dynamics.

If you use scales to multiple family members, customize your profiles in the app, which will allow the device to automatically recognize users by weight and store personal data.

FAQ: Frequent questions about Xiaomi weight loss