Resetting settings on Xiaomi Earbuds headphones: a complete guide for all models

Xiaomi Earbuds have become a popular choice among users due to the combination of sound, convenience and affordable price. However, even with such reliable technology, sometimes there are problems: the headphones stop connecting to the phone, the sound is distorted, or one of them suddenly turns off. In 90% of cases, these problems are solved by simply resetting the settings to the factory. But how to do this so as not to damage the device?

In this article, we’ll look at all the possible resets for different Xiaomi Earbuds models, from classic AirDots to the latest Buds 4 Pro. You’ll learn when to reset, how to avoid typical errors, and what to do if the headphones don’t respond to standard commands. And for those who are afraid of breaking something, we’ve prepared step-by-step instructions with photos and video guides.

When do I need to reset settings on Xiaomi Earbuds?

Resetting to factory settings is not a panacea, but it helps in most cases when the headphones start to malfunction. Here are the main symptoms for which it is worth trying this procedure:

• 🔌 Headphones don't connect to a phone or laptop, although they used to work normally
• 🔊 The sound is interrupted, wheezing appears or one earphone is silent
• 🔄 Headphones spontaneously turn off or reboot
• 📱 Mi Home or Xiaomi Wear app doesn't see device
• 🔋 Battery discharges quickly, though it used to hold charge longer

It is important to understand that resetting will not help if the problem is associated with physical damage, such as water entering the body or mechanical wear of the contacts, in which cases you will need to repair or replace the headphones.

⚠️ Warning: If your Xiaomi Earbuds are warranty-free, resetting won't cancel it, but if you've previously opened the case or changed parts, warranty service may be denied.

Also, you should consider that after resetting, you will have to reconnect your headphones to your devices and adjust the control gestures (if supported by your model), all the saved sound profiles and EQ settings will reset to standard.

Preparation for resetting: what to do in advance

Before you start resetting, follow a few simple steps to avoid additional problems:

1. Check the battery power -- the headphones should be at least 30 percent charged. If the battery is discharged, the reset may not be correct.
2. Disconnect headphones from all devices – remove them from the list of connected gadgets in the Bluetooth settings on your smartphone, tablet or computer.
3. Prepare the case – if your model has a charging case, put both headphones inside and close the lid for 10 seconds.
4. Make sure there is no interference – turn off nearby microwave ovens, 5G routers, or other devices that may cause electromagnetic interference.

If you have a model that supports Xiaomi Wear or Mi Home, check the firmware version beforehand. Sometimes a reset helps solve problems after a failed update.

1. Open the Xiaomi Wear app.
2. Go to the Devices section → [Your headphones] → Settings → About the program.
3. Take a picture or take a picture of the version number.

How to reset settings for different models Xiaomi Earbuds

The reset procedure may vary depending on the headphone model. Below we have collected instructions for the most popular Xiaomi lines. If your model is not on the list, try the universal method (described in the next section).

For models with a button on the case (for example, AirDots or Buds 4 Pro), the algorithm is simpler: just put the headphones in the case, close the lid and hold the button until the indicator starts flashing red and white alternately, this signals the beginning of the reset process.

In touch-controlled headphones (like the Buds 3 Pro), the process is a little more complicated.

1. Get both earphones out of the case.
2. At the same time, touch and hold the touch panels on both headphones.
3. Hold for 10-15 seconds until the lights start flashing red.
4. Release your fingers and wait for the reset (the indicators will light up white).

💡

If the headphones don't respond to the reset, try plugging them into charging for 5 minutes and then repeat the procedure. Sometimes low battery power blocks the execution of commands.

Universal Reset Method for All Models

If you are not sure about the model of your headphones or the standard method did not work, use a universal method that is suitable for most TWS- headphones Xiaomi:

1. Put both headphones in the charging case and close the lid.
2. Connect the case to the power source (charging or Power Bank).
3. Hold the button on the case (if any) or simultaneously press the touch panels of both headphones (if no button).
4. Hold for 20-30 seconds until the lights start flashing red and white alternately.
5. Release the button and wait until the headphones reset (the indicator will turn white or blue).

Important: If the headphones are not turned on or detected by the devices after reset, try resetting them again, but before that, completely discharge and charge the battery (up to 100%), which helps in cases where the error is associated with the power controller.

If the universal method does not work, check:

• 🔋 Case charge and headphones (indicators should burn when connected to charging).
• 📶 Interference (disable nearby wireless devices).
• 🔧 Integrity of contacts in the case (clean them with a cotton swab dipped in alcohol).

Frequent Resetting Mistakes and How to Avoid Them

Many users find that the reset doesn't go away or that the headphones work even worse after the reset, and 80 percent of the time it's due to typical errors that are easy to avoid:

⚠️ Warning: Never interrupt the reset process, even if the headphones seem to be stuck. Premature shutdown may damage the firmware, and then you will need to flash through the service center.

Here are the most common mistakes and ways to solve them:

If Xiaomi Earbuds headphones still don’t work properly after reset, try the following steps:

1. Update your firmware through the Xiaomi Wear app (if available for your model).
2. Reset your Bluetooth settings on your phone – sometimes the problem lies in the smartphone, not the headphones.
3. Check the headphones on another device – connect to another smartphone or tablet to rule out a problem with the main gadget.

💡

If the reset did not help, and headphones for warranties - do not try to disassemble them yourself. Contact the Xiaomi service center with a check and packaging (if you have any).

How to Restore Headphones After Resetting

After a successful reset, Xiaomi Earbuds headphones will return to factory settings, which means you will have to reset:

• 📱 Connect them to a phone or other device via Bluetooth.
• 🎧 Set up control gestures (if supported).
• 🔊 Select a sound profile (bass, vocals, balanced).
• 🔋 Check the battery level.

To connect the headphones after reset:

1. Open the case cover (the headphones should be inside).
2. On your phone, turn on Bluetooth and look for Mi True Wireless Earbuds or a similar name in the list of available devices.
3. Press "Connect" and confirm the pairing.
4. If required, enter the PIN- code (usually 0000 or 1234).

For models with support for the Xiaomi Wear app after connecting:

1. Open the app and select your headphones.
2. Go to Settings → Gestures and set up controls (e.g. double tap for playback/pause).
3. In the Sound section, select your preferred EQ- profile.

If the headphones are connected after reset, but the sound is distorted or interrupted, try:

• Disable high quality codecs (such as AAC or aptX) in Bluetooth settings.
• Reboot the phone or device to which the headphones are connected.
• Check the headphones on another device to rule out a smartphone problem.

Alternative methods of problem-solving

If the reset didn't work, don't rush to carry your headphones for repair. Here are some alternative ways that can bring them back to life:

1. PC Flashing – Some models (like the AirDots Pro 2) have informal firmware tools that are risky, but sometimes help with serious crashes.
2. Reset via engineering menu – if the headphones connect to the phone but are unstable, you can try resetting Bluetooth settings on your smartphone: ##4636## → Phone Information → Reset Wi-Fi/Bluetooth/mobile network
3. Cleaning contacts – if the headphones don’t charge or turn off, the problem may be oxidized contacts.

To refashion through the PC, you will need:

• 💻 Windows computer 10/11.
• 🔌 Cable USB-C Micro-USB (depending on the case model).
• 📁 Firmware for your model (can be found on the 4PDA or XDA-Developers forums).
• 🛠️ A firmware program (e.g., MiFlash or Fastboot).

⚠️ Warning: Unofficial firmware can take away your warranty and cause your headphones to run in an unstable way, and only use this method if other methods have failed and you understand the risks.

If you decide to reflash, follow the instructions:

1. Download the firmware and program for your model.
2. Connect the case with headphones to the PC (earphones must be inside).
3. Run the program and select the firmware file.
4. Follow the instructions on the screen (usually press Start and wait for the process to end).
5. After the firmware, reset the settings again.

💡

Before you run through your PC, make sure to check the file's compatibility with your headphone model.

FAQ: Frequent questions about Xiaomi Earbuds reset