How to Reset Xiaomi Lite Watch to Factory Settings: The Complete 2026 Guide

Xiaomi Lite smartwatches are popular fitness trackers with basic functionality, but even they sometimes require a complete reset. You may have experienced a freeze, synchronization errors or just want to sell the device — in any case, a factory reset solves most software problems. However, the procedure is different from a smartphone reset: there is no usual Recovery menu, and the wrong actions can turn the gadget into a brick.

In this article, we will discuss all the working reset methods for Mi Band Lite, Redmi Watch Lite and their counterparts, including hidden features and nuances that are not written about in the official instructions. We will focus on recovery from a failed reset and how to avoid data loss. If your watch does not respond to touch or constantly reboots, here you will find a solution.

1.When you need to reset the Xiaomi Lite watch: 5 clear signs

Factory reset is a last resort, but sometimes it's a must, and here are the symptoms that make the procedure worthwhile:

• ⚡ The watch hangs on the logo when turned on and does not respond to charging.
• 🔄 Mi Fitness (or Zepp Life) is permanently losing communication with the device despite reinstalling the app.
• 📱 Artifacts (strips, flickering) appear on the screen or the sensor stops working.
• 🔋 The battery discharges in a few hours, although it used to hold the charge for days.
• 🔒 You forgot. PIN-Screen unlock code (relevant for Redmi Watch Lite).

If the problem is hardware-based (e.g., the watch doesn't charge or the screen is broken), resetting won't help -- it'll need repairs, but 80 percent of the time, the software failure is fixed by flashing.

⚠️ Warning: Reset removes all data from the clock, including training statistics, alarm settings and tied notifications. If the clock is still working, first sync the data with the app!

2. Method 1: Reset via Mi Fitness/Zepp Life app (the safest)

This is the official method recommended by Xiaomi.Suitable for all Lite models, as long as the watch is turned on and connected to the phone.

Instructions:

1. Open the Mi Fitness app (or Zepp Life for new models).
2. Go to the Profile section → My devices.
3. Choose your Xiaomi Lite watch from the list.
4. Scroll down and press Untie the device.
5. Confirm the action - this initiates the reset.

Synchronize data with the cloud

Charge the watch by at least 50%

Ensure a stable Internet connection

Remember the login from the Mi Account

-->

Once uncoupled, the watch will automatically reboot and return to factory settings, and it can now be reconnected to the phone as a new device.

⚠️ Warning: If the clock is not set in the app after reset, try rebooting Bluetooth on your phone or using another smartphone to link. Sometimes changing the region in the Mi Account settings (for example, from Russia to India helps).

Method 2: Hardware reset via a button (for hung watches)

If the watch doesn't respond to touch or connect to the phone, hard resetting via a physical button will help.The method works for the Mi Band Lite and Redmi Watch Lite, but requires accuracy.

Step-by-step:

1. Remove the strap and find the reset button on the back of the watch (usually next to the charging contacts).
2. Take a paperclip or toothpick and press the button for 10-15 seconds.
3. Release the button – the watch should vibrate and reset.
4. Wait for the Xiaomi logo to appear – this is a sign of a successful reset.

If the watch doesn’t vibrate after pressing the button, try:

• 🔋 Connect them to charge for 10 minutes, then try again.
• 🔨 Use a sharper object (such as a needle) but without undue effort.
• 📱 Try resetting via app (mode 1) if the watch is at least somehow responsive.

💡

If the button is not pressed, try to heat the body slightly with a hairdryer (not higher than 50 ° C) - sometimes this helps with the oxidation of contacts.

Method 3: Recovery Reset (for advanced users)

This method is suitable for the Redmi Watch Lite and other Propietary OS-based watches (not Wear OS), which are more complicated but saves when the first two fail.

Instructions:

1. Turn off the clock (if it is on).
2. Connect them to the charger.
3. Hold the touch button (usually the bottom of the screen) for 20-30 seconds until the Recovery menu appears.
4. Select the Wipe Data (or Reset) option.
5. Confirm the action and wait for the reboot.

If the Recovery menu does not appear:

• 🔌 Try using another cable – the original one from Xiaomi is often required to activate the mode.
• 🕒 Hold the button for longer (up to 1 minute).
• 📱 Connect your watch to your phone via Mi Fitness and try to initiate a reset from there in parallel.

💡

Not all Lite models have Recovery Menus, but if you don’t have one, use hardware reset (method 2) or firmware via PC.

5.What to do if the reset did not help: diagnosis and recovery

If the clock does not turn on after reset or is malfunctioning, the following problems may occur:

If the watch is completely dead (unresponsive to charging, buttons, touches), the power controller may have failed.

1. Try flashing the watch through the PC (instructions in the next section).
2. If the firmware does not help, contact the service center. The cost of repairing Xiaomi Lite usually does not exceed 1,500-2,000 rubles.

⚠️ Warning: Don't try to disassemble the watch yourself - 90% of the time it causes plumes to damage or moisture.The Xiaomi Lite body is not designed for home repair.

6.Reflashing Xiaomi Lite watches via PC (last chance)

If the reset doesn't work, you have to manually stitch the clock.

• 💻 Windows computer (or Mac with emulator).
• 🔌 Original. USB-cable (better from Xiaomi).
• 📁 Firmware for your model (you can download on the official website or forums like 4PDA).
• 🛠 Mi Fit Tool or Nrf Connect (for Mi Band Lite).

Step-by-step:

1. Install the Mi Fit Tool and watch drivers.
2. Connect the watch to your PC via a charging cable (they must be turned off).
3. Start the utility and select your model.
4. Click Flash Firmware and specify the path to the firmware file (.fw or.bin).
5. Wait until the process is completed (usually 5-10 minutes).

If the firmware is interrupted:

• ⚡ Do not disconnect the watch from the PC – this can lead to a breakage of the bootloader.
• 🔄 Try repeating the process with another firmware version.
• 📡 If the utility does not see the device, check the port. USB (better USB 2.0).

7.How to avoid problems after resetting: tips for setting up

After a successful reset, the Xiaomi Lite will return to a “out of the box” state. To avoid repeated failures, follow these recommendations:

• 📲 Update your firmware through the Mi Fitness app to the latest version.
• 🔄 Do not install third-party dials from unverified sources – they often contain errors.
• 📴 Disable unnecessary notifications (such as from social networks) to reduce the load on the processor.
• 🔋 Charge the watch with the original cable – cheap analogues can damage the power controller.
• 🌡 Avoid overheating (do not leave in the sun) and getting moisture (even if the model is waterproof).

If you sell or transfer your watch to another person:

1. Reset them to factory settings (method 1 or 2).
2. Untie the device from your Mi Account in the app.
3. Remove the watch from the list of trusted devices in Google settings (if you used Google Fit).

💡

After reset, sync your watch with the app for the first 10 minutes – this reduces the risk of errors when you use it later.

FAQ: Frequent questions about Xiaomi Lite reset