How to reset Xiaomi Mi Band 6 to factory settings: full instruction

The Xiaomi Mi Band 6 fitness bracelet is one of the most popular wearables on the market, but even with it, sometimes there are problems: freezes, synchronization errors or the need to transfer the gadget to a new owner. In such cases, resetting to factory settings becomes the only solution. However, many users face difficulties: the bracelet does not respond to commands, the application does not see the device, or after reset, new errors occur.

In this article, we’ll look at all the possible resets, from standard ones (via Mi Fit or Zepp) to alternative ones (hardware button, linking to a new account), and how to avoid common mistakes, such as when the bracelet stops displaying notifications or doesn’t sync with your phone after a reset. If you plan to sell or give away the Mi Band 6, here’s a guide to how to completely delete your data from your device.

When do I need to reset the Mi Band 6?

Resetting to factory settings is a last resort, but sometimes it is necessary. Here are the most common situations when it is required:

• 🔄 The bracelet is getting stuck and does not respond to touch or button.
• 📱 Mi Band 6 doesn't sync with phone despite app reboot and reinstallation.
• 🔒 You sell or transfer the bracelet to another person and want to delete personal data.
• 🔧 After updating the firmware, errors appeared (for example, a pulsemeter or pedometer does not work).
• 📲 The bracelet is tied to an old Xiaomi account and you can’t untie it.

It’s important to understand that resetting removes all settings and data from the wristband: activity history, alarms, notifications, and even account binding, but physical activity stored in the Mi Fit or Zepp cloud will remain available in the app (if you’re logged in to your account).

⚠️ Warning: If you drop the bracelet before selling, be sure to untie it from your app account, otherwise the new owner will not be able to tie the device to their phone.

Method 1: Reset via Mi Fit (official method)

The easiest and most recommended way is to use the official Mi Fit app, which works if the bracelet is connected to the phone and responds to commands.

Instructions:

1. Open the Mi Fit app on your phone.
2. Go to the Profile section → Mi Smart Band 6.
3. Scroll down and select Untie the device.
4. Confirm the action - the bracelet will automatically perform the reset.

If there is no item Untie the device, try an alternative way:

Profile → Mi Smart Band 6 → Additional → Resetting settings

Once reset, the Mi Band 6 bracelet will reboot and be ready for a new binding, all you have to do is hold it to your phone and follow the instructions in the app.

Make sure the bracelet is charged (minimum 20%)

Turn on Bluetooth on your phone

Update the Mi Fit app to the latest version

Close background applications that may interfere with synchronization-->

Method 2: Reset via Zepp (for users outside of China)

In some regions (e.g. Europe), the Mi Band 6 runs through the Zepp app (formerly Amazfit). the interface is slightly different, but the reset process is similar.

How to reset:

1. Open Zepp and go to the Profile tab.
2. Select your Mi Band 6 from the device list.
3. Press three points (⋮) top-right.
4. Select Remove the device and confirm.

If the bracelet does not reset automatically after that, perform a forced reset:

• 🔋 Connect the bracelet to charging.
• 🔄 Press and hold the touch button for 10-15 seconds until the Mi logo appears.

⚠️ Note: Zepp doesn’t have a separate “Reset” option – the device only resets when removed. If the bracelet doesn’t respond, try the hardware button method (see below).

Method 3: Hardware reset via button (if bracelet does not respond)

If the Mi Band 6 is stuck, not on or synced with the phone, you can do a hard reset with a physical button, which works even without connecting to the app.

Step-by-step:

1. Remove the bracelet from your hand and disconnect the strap (access to charging contacts is required).
2. Connect the bracelet to the charger (optional, but recommended for stability).
3. Find a small touch button (under the display) on the case.
4. Press and hold it for 20 to 30 seconds until the Mi logo appears on the screen.
5. Release the button and the bracelet will begin the reset process.

If the bracelet is not activated after that:

• 🔌 Try to hold the button longer (40-50 seconds).
• 🔋 Make sure the charging is connected correctly (the contacts must fit tightly).
• 📱 Try to tie the bracelet to another phone.

Method 4: Reset by decoupling from Xiaomi account

If the bracelet is tied to a Xiaomi account but you can’t reset it (for example, a lost phone or an app is not working), you can delete the device through the web version of the account.

Instructions:

1. Go to account.xiaomi.com and log in.
2. In the Devices section, find your Mi Band 6.
3. Click Remove the device and confirm the action.
4. After that, the bracelet will be untied from the account, and it can be tied again.

If the device is not listed:

• 🔍 Try to log in via another browser or device.
• 📧 Check that you are using the same account that the bracelet is linked to.
• 🔄 Update the page or clear the browser cache.

💡

If you are selling a bracelet, be sure to remove it from your Xiaomi account in advance. The new owner will not be able to tie the device while it is listed for you.

Method 5: Reset via third-party applications (for power users)

If standard methods don’t work, you can try specialized utilities, such as Mi Bandage or Notify & Fitness for Mi Band, which allow you to control the bracelet at a low level, including forced reset.

Importantly, this method is not official and can lead to unstable operation of the bracelet. Use it only if other methods have not worked.

Instructions for Notify & Fitness:

1. Install the app from Google Play.
2. Connect the Mi Band 6 via standard Bluetooth pairing.
3. Go to the Settings section → Device → Reset.
4. Select Full Reset (with unpair) and confirm.

After discharge:

• 📱 Re-attach the bracelet via Mi Fit or Zepp.
• 🔄 Update the firmware to the latest version.
• ⚙️ Set up notifications and settings again.

⚠️ Note: Third-party apps may request access to personal data. Before using, check the reviews and reputation of the developer.

Through Mi Fit/Zepp

Hardware button

Uncoupling from Xiaomi account

Third-party annex

Nothing helped.-->

What to do if the bracelet is not reset?

Sometimes Mi Band 6 stubbornly doesn't want to drop despite all the attempts.

If none of the methods worked:

• 🔌 Try hand-stitching the bracelet through the Mi Bandage (requires technical skills).
• 📞 Contact the Xiaomi service center – if the bracelet is guaranteed, the reset will be performed for free.
• 🔄 Buy a new strap with contacts – sometimes the problem is in damaged charging contacts.

💡

If the bracelet does not respond to reset, in 90% of cases the problem is solved by fully charging and retrying after 1-2 hours.

FAQ: Frequent questions about resetting Xiaomi Mi Band 6