How to tie the scooter Xiaomi to the phone: full instructions with error solutions

Xiaomi’s electric scooters are some of the most popular vehicles in the city, but they can’t be used without synchronizing with a smartphone. Phone tethering gives you access to real-time data (speed, battery power, mileage), allows you to adjust driving modes, update your firmware and even block the scooter from stealing. However, many users face problems: the app can’t see the device, the connection is constantly broken, or the scooter refuses to connect after resetting.

In this article, we will analyze all the current methods of binding (via Mi Home, Xiaomi Wear and alternative methods), consider typical errors and their solutions, and give recommendations for optimizing the operation of the scooter after synchronization. M365, Pro 2, 1S, 3/4 Lite, Electric Scooter Essential and others released after 2018 If your scooter is older, check compatibility at the end of the article.

What applications are needed to tie the scooter Xiaomi

Two applications from Xiaomi are officially used to synchronize the scooter with the phone:

• 📱 Mi Home is a universal application for all smart devices of the brand. supports basic scooters functions (mileage, lock, updates), but has limited settings for driving.
• 🚀 Xiaomi Wear (formerly Mi Scooter) - specialized software for scooters and electric vehicles. Offers advanced features: cruise control settings, power consumption modes, detailed travel statistics.

Important: from 2023, Xiaomi gradually transfers scooters to Xiaomi Wear, but some models (for example, the company has been using the same model, M365 Early batches) may require Mi Home. Check the compatibility of your model in the table below:

If your model is not listed, check the firmware version of the scooter: press the power button 5 times in a row - the current version will appear on the display.

⚠️ Note: Mi Home and Xiaomi Wear apps do not support simultaneous operation with a single scooter. If you have previously used Mi Home, before switching to Xiaomi Wear, be sure to remove the scooter from the first application (Devices section) → Settings → Delete).

Preparation of the phone and scooter for synchronization

Before binding, make sure your phone and scooter meet the minimum requirements:

• 📲 Operating system: Android 6.0+ or iOS 12+. On iPhones with iOS 15 and later, Bluetooth 5.0 may be problematic — you need to roll back to iOS 14 or use alternative methods (see section below).
• 🔋 Scooter charge: at least 30%. At a charge level below 20%, the application can block the connection.
• 📶 Internet: stable Wi-Fi or mobile network connection (required for Xiaomi account authorization and firmware download).
• 🔄 Bluetooth: version 4.2 On Bluetooth phones or higher. 5.0 (for example, Xiaomi 11/12 series) may need to disable dual connection in settings.

Step-by-step training:

1. Turn on the scooter with a long press of the power button (3-5 seconds). Wait until the indicator flashes blue (search mode).
2. On your phone, activate Bluetooth and Geolocation (required for Mi Home).
3. Remove from the phone memory all previously saved devices with names MIJIA-XXXX or XMS-XXXX (Bluetooth).
4. Reboot your phone and scooter (for scooter: hold the power button for 10 seconds before turning it off).

Remove the scooter from previous applications

Check the battery charge (>30%)

Enable Bluetooth and geolocation

Reboot the phone and scooter

Update the application to the latest version-->

If the scooter was previously tied to another phone, reset the settings:

1. Turn off the scooter.
2. Press the power button and the brake button simultaneously for 10 seconds.
3. Wait for a double beep - the scooter will reset to the factory settings.

Mijia M365

Pro 2 / 1S

3 Lite / 4 Lite

Electric Scooter 4 Pro

Another model-->

Step-by-step: how to tie a scooter through Mi Home

The Mi Home app is suitable for most models, but has limited functionality.

1. Install the application from official stores: 🤖 Google Play 🍎 App Store

Xiaomi

Add device (+)

Transportation

Electric scooter

blue

The app will start searching. When the scooter appears on the list, click on it.

0000

1234

Wait until the synchronization is complete (it can take up to 2 minutes).

Once the scooter is successfully tied, it will appear on the Mi Home main menu, where you can:

• 🔒 Block/unlock the scooter remotely.
• 📊 View travel statistics (mileage, average speed).
• 🔄 Update the firmware (if available for your model).

⚠️ Note: Mi Home does not have a driving mode setting (Eco/Turbo) These features require Xiaomi Wear, and some users note that after updating the firmware through the Mi Home, the scooter may no longer be defined in Xiaomi Wear - in which case, reset and re-attach via the second app.

Tethering through Xiaomi Wear: advanced settings

Xiaomi Wear (formerly Mi Scooter) offers more options for setting up the scooter, but the connection process may vary depending on the app version.The current instruction for 2026:

1. Download the app: 🤖 Google Play (version 2.4.5)+) 🍎 App Store (version 2.3.0)+)

For old scooters (M365) may be required APK-Version 1.8.7 (download at your own risk!).

Xiaomi Wear

Xiaomi

Mi Home

Add the device

Bluetooth

• 🔄 Reload the scooter.
• 📱 Turn off/turn on Bluetooth on your phone.
• 🚫 Make sure the scooter is not tied to another phone (reset if necessary).
• After detection, enter PIN-code (default 0000).
• Confirm the binding in the window with the request for permission to access the geolocation and notifications.

What is available in Xiaomi Wear after connecting:

💡

If you do not display advanced settings (for example, cruise control) after connecting to Xiaomi Wear, update the scooter firmware through the Settings section → Software Update: Sometimes it takes multiple scooter reboots to apply changes.

Typical binding errors and their solutions

Even with the correct following of the instructions, users often face problems, and consider the most common errors and ways to fix them:

1.The scooter is not in the appendix.

Possible causes and solutions:

• 🔋 Low battery power: charge the scooter to 30% and try again.
• 📱 Incompatible Bluetooth version: on Bluetooth 5.0 phones (e.g. Samsung Galaxy) S21, iPhone 12) Try disabling Dual Connection in the settings.
• 🔄 Conflict with other devices: delete all saved devices MIJIA-XXXX Bluetooth phone memory.
• 🛠️ The Bluetooth scooter module is damaged: if the indicator does not flash blue when turned on, repair is required.

2. “Unable to connect” or “Device occupied” error

This error occurs if the scooter is already linked to another phone or account.

• 🔄 Reset the scooter (power button) + brake).
• 📱 Remove the scooter from the Mi Home/Xiaomi Wear on your old phone (if you have access).
• 🔑 If you have a hand-held scooter, ask the previous owner to delete it from your Xiaomi account.

3.The application freezes at the "Connection" stage

A common problem on iPhones and custom firmware phones.

• 📱 Reinstall the app (Mi Home or Xiaomi Wear).
• 🌐 Connect your phone to another Wi-Fi network (sometimes blocked due to corporate networks).
• ⏳ Wait 5-10 minutes – sometimes the connection process takes longer.

4. After updating the firmware, the scooter does not turn on

Critical error: If the scooter stopped responding to the power button after updating through the Mi Home, this indicates that the firmware is incompatible with your model.

• 🔋 Connect the scooter to charge for 30 minutes – sometimes helps to “wake up” the controller.
• 🔄 Perform reset (power button) + brake).
• 🛠️ If the scooter does not respond, you will need to flash through ST-Link (refer to the service).

Alternative ways of connecting (if official methods do not work)

If standard tethering via Mi Home or Xiaomi Wear is not possible, try one of the alternative methods:

1. Annex M365 DownG (for models) M365/Pro/1S)

Unofficial software with advanced settings, including:

• 🔧 Unlock speed limit (up to 30-35 km/h).
• 📊 Detailed telemetry (controller temperature, battery voltage).
• 🔄 Manual firmware updates (including custom versions).

How to connect:

1. Download. APK from the official website (version 2.1.0)+).
2. Turn on the scooter and activate Bluetooth on the phone.
3. Launch it. M365 DownG → Connect → Choose your scooter from the list.
4. Enter. PIN-code (default 0000).

⚠️ Note: The use of informal firmware can deprive warranty and lead to unstable operation of the scooter. It is not recommended to increase the speed limit above factory values - this increases the risk of accidents and battery wear.

2. Connect via Xiaomi Cloud Tokens (for power users)

If the scooter is tied to someone else's Xiaomi account and you can't contact the previous owner, you can try reassigning the device through cloud tokens.

1. Install Mi Home Token Extractor (Android only)
2. Sign in to your Xiaomi account through this app.
3. Get Cloud Token and Device ID scooter.
4. Use OpenMiHome to link your device to your account.

This method does not work for all models and can lead to account blocking when used frequently.

Manual firmware update via ST-Link (to restore operability)

If the scooter is “bricked” after a failed update, it can be restored using the ST-Link programmer:

• 🛠️ Required: ST-Link V2, soldering iron, DuPont wires.
• 📥 Download the firmware for your model with 4PDA.
• 🔧 Connect ST-Link to the scooter controller (connection scheme depends on the model).
• 🖥️ Use it. STM32CubeProgrammer firmware.

This method is recommended only for experienced users or in service centers.

Scooter setting after binding: optimization and safety

After successful synchronization, it is recommended to follow several steps for optimal operation of the scooter:

1. Firmware update

Regular updates improve stability and add new features.

1. Open up Xiaomi Wear → Choose a scooter → Settings → Update of the PO.
2. If the update is available, connect the scooter to the charge (the charge should be) >50%).
3. Click Update and wait until completion (do not turn off the scooter!).

Average update time: 5-15 minutes if the process is delayed:

• 🔄 Reboot the scooter (power button for 10 seconds).
• 📱 Reinstall the app.
• 🔌 Check the quality of the connection with the charger.

2. Adjustment of driving modes

There are three main modes available in Xiaomi Wear:

• 🌿 Eco: speed limit to 15-18 km/h, soft acceleration, suitable for beginners and saving charge.
• ⚡ Standard: speeds up to 20-25 km/h, balance between power and autonomy.
• 🚀 Sport: maximum speed (up to 25-30 km / h), fast acceleration. Reduces the mileage by 20-30%.

Recommendation: Standard is optimal for urban driving. Sport mode increases the load on the battery and engine.

3. Incorporation of cruise control

The function is supported on Pro models 2, 1S, 3/4 Lite and newer. How to set up:

1. In Xiaomi Wear, go to Settings → Cruise control.
2. Activate the slider Enable.
3. Set the activation rate (15-20 km/h is recommended).
4. Keep your speed at a set level for 5 seconds while driving – cruise control will turn on automatically.

4. Set up notifications and security

To protect the scooter from theft and receive important notifications:

• 🔒 Enable Distance Lock (in Xiaomi Wear): Scooter will be blocked if you move further than 10 meters.
• 📲 Set up low charge notifications (Settings) → Notifications → Battery charge).
• 🚨 Activate Anti-Ugon (available for Pro 2 and later): When you try to move without unlocking through the application, the scooter will emit an audible signal.

💡

Once you have tied the scooter to your phone, be sure to update your firmware and adjust your driving modes.This will not only improve performance, but also reduce the risk of sudden crashes during the trip.

Frequently Asked Questions (FAQ)