How to wear headphones Xiaomi Redmi Airdots: the secrets of comfort and stability

Xiaomi Redmi Airdots wireless headphones have gained popularity due to the combination of price, sound quality and convenience. However, even such compact gadgets can be uncomfortable if you wear them wrong. Losing while running, weak noise insulation or discomfort during prolonged wear are problems that owners face. In this article, we will discuss the step-by-step technique of proper fitting for all models of the series (including the Redmi Airdots S, Airdots 2, Airdots 3 and Airdots Pro), as well as tips on choosing the size of the mounts and care of the device.

Redmi Airdots’ semi-intracanal design, which involves placing the earpiece not deep in the ear canal but with a focus on the cartilage protrusion (goat), strikes a balance between stability and comfort, but requires precise positioning. If you’ve never used a headphone like this or move from classic “plugs”, the first attempts may seem uncomfortable. Don’t rush to blame the manufacturer: 90% of the time, the problem lies in the wrong technique of putting on.

Preparing headphones for the first use

Before you wear Xiaomi Redmi Airdots, you need to follow several mandatory steps, neglecting them can lead to bad sound, quick discharge or even breakage.

First, check the configuration: the box should be the headphones, charging case, cable USB Type-C (or Micro-USB for older models) 3 pairs of replacement embushures (sizes) S/M/L). If the bottle is not enough, this is an occasion to go to the store, because without the right size to achieve tightness will not work. 100%: First low-charge launch could cause Bluetooth malfunctions.

• 🔋 Charging the case: connect the cable to the connector on the back panel. The indicator should light up red, and after full charging - go out or turn green (depending on the model).
• 🎧 Charging the headphones: put them in a case -- the contacts should match the metal pads inside. Close the lid: the headphones flash red, then go out.
• 🔄 Resetting (if used): Press and hold the touchpads on both headphones for 15 seconds until the indicators start flashing red and white.

Also worth updating the firmware (relevant to Airdots 3 and Airdots Pro models). To do this, download the Mi Home or Xiaomi Wear app, plug in the headphones and check for updates in the Devices section. → Headphones → Software Update: Outdated firmware can cause connectivity and sound quality problems.

Choosing the Right Size of Ambusheries

The silicone headpieces are a key element in keeping the headphones tight and stable. The Redmi Airdots come in 3 sizes: S (small), M (medium, default), and L (large), and the wrong choice leads to:

• 🔊 Weak noise insulation (extraneous sounds penetrate, bass is lost»).
• 😖 Discomfort with prolonged wearing (pressure on the ear canal).
• 🏃 Loss during movement (earphones are not fixed in the ear).

To determine the size, perform the test:

1. Put on the M (standard) earpiece and insert the earpiece into your ear.
2. Pull the earpiece lightly - if it comes out effortlessly, take an L size.
3. If you feel pressure or pain after 10-15 minutes, try S.

Critically, the embroideries lose elasticity over time (especially when used heavily); replace them every 6 to 12 months, even if they look normal on the outside; worn-out silicone does not provide leakage, leading to sound deterioration and frequent fallout.

Step-by-step: how to insert Redmi Airdots in your ears

Now, to the basics of the wear technique, follow the instructions to make the headphones as steady as possible.

1. Take the earpiece with your right hand (for your right ear) and unfold it so that the microphone is pointing down and the Mi logo is pointing out.
2. Pull the ear canal back and up with your left hand, which straightens the ear canal and makes insertion easier.
3. Carefully insert the earpiece into the ear at an angle ~45°, Then scroll it forward slightly so that the earpiece is firmly attached to the walls of the channel.
4. Release the ear and check the tightness: cover the ear with your finger - a "vacuum" effect should appear (the sound will become deaf).

For the left ear, repeat the same actions mirrored. If the earpiece is sitting correctly, you should not feel pressure, and the sound should become more saturated (especially low frequencies).

A slight tug at the earpiece doesn't pull it out.|When chewing or talking, the earpiece does not shift.|The basses sound clear, without "drumming»|No discomfort after 10 minutes of wearing-->

Mistakes that beginners make:

• ❌ Insert the earpiece perpendicular to the ear canal (correctly - at an angle).
• ❌ Do not scroll the earphone after insertion (this helps the ambusure "suck on»).
• ❌ Use too large or small amps (see section above).

💡

If your headphones are constantly falling out when you run, try putting them backwards (microphone up), which is a non-standard way to do it, but it helps some users achieve better fixation by changing their center of gravity.

Features of wearing for different models of Redmi Airdots

While the landing principle of all Redmi Airdots is similar, there are nuances for specific models:

Redmi Airdots (1st generation) and Airdots S

These models are the simplest design without any additional locks, and the main problem is the poor resistance in active movements.

• 🎯 Use L-suited earpieces even if M seems appropriate.
• 🔄 Scroll the headphone on 90.° after insertion for better fixation.

Redmi Airdots 2

An updated version with improved ergonomics and softer earpieces, suitable for long-term wear, but can slip when sweating.

• 💧 Rub the hoods with alcohol wipes once a week – this removes fat and sweat, improving grip.

Redmi Airdots 3 and Airdots Pro

Flagship models with hybrid system ANC (Active noise reduction is critical here:

• 🔇 If ANC works poorly, check the density of fitting of the bottles - even the microgap reduces the effect to zero.
• 🎛️ In the settings of the Xiaomi Wear app, select the Enhanced Pressurity mode (if available).

How to Avoid Headphone Loss During Sports

One of the main complaints against Redmi Airdots is that they have an unstable landing when running or training, and this is a solvable problem when you consider several factors:

1. Use ear hooks (separately sold) that cling to the ear and prevent loss. 2/3/Pro.
2. Put your headphones on backwards (microphone up) and this shifts the center of gravity and improves fixation.
3. Lock the cable behind your clothes (if you use one earpiece), such as snooping the loop through a button on your T-shirt.

The correct running technique will also help:

• 🏃‍♂️ Keep your head straight - tilts forward/back shift headphones.
• 💨 Breathe through your nose – oral breathing creates vibrations that shake the landing.

⚠️ Warning: If the headphones are constantly falling out even after all the manipulations, check the weight of the headphones.Fake Redmi Airdots are often lighter than the original ones (the original weighs in). ~4g, fake 2-3g, which impairs stability. Check the weight against the official specifications on Mi.com.

Headphone care: how to extend the service life

Proper care affects not only hygiene, but also planting quality. Silicone embroideries lose elasticity over time, and accumulated sulfur or sweat worsens traction.

• 🧼 Cleaning the bottles: once a week, wash them with warm water and soap, then dry for 2-3 hours (do not use a hair dryer!).
• 🧴 Sulfur removal: to clean the speaker grille, use a cotton swab dipped in alcohol (don't press hard!).
• 🔋 Storage: Always put your headphones in your case – this protects against dust and mechanical damage.
• 🌡️ Temperature: Do not leave your headphones in the sun or in your car in the summer (silicone may become deformed).

Use ultraviolet sterilizers (e.g. Xiaomi Mi Portable) for disinfection. UV Sterilizer, or electronic wipes, don't use aggressive chemicals like acetone, gasoline, they destroy silicone.

⚠️ Warning: If the hoods are out of shape (became "oak" or stretched), they must be replaced. The use of deformed tips leads to a loss of leakage by 40-60%, which affects sound quality and stability.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that spoil the experience of Redmi Airdots.

Another common problem is the different volumes on the headphones, and most of the time, it's related to:

• 🔊 Clogging the speaker grille (clean with a cotton swab).
• 🎛️ Unbalanced settings (check in Bluetooth Settings) → Additionally. → Stereo balance).
• 🔋 Different charge levels (charge both earphones to 100%).

💡

If headphones start to hold worse after a year of use, the problem isn't with your ears, it's with the wear of the earpieces. Replacing the silicone tips solves the problem 80 percent of the time.

FAQ: Answers to popular questions