How to change the language on the watch Xiaomi Wear: all the ways and nuances

Xiaomi Wear smartwatches are popular gadgets that support many interface languages, including Russian. However, after buying or resetting the device can automatically choose the language that is uncomfortable for you (most often English or Chinese). In this article, we will analyze all possible ways to change the language on the Mi Band, Xiaomi Watch and other models of the Wear line, as well as consider typical errors and their solutions.

It is important to understand that the process can vary depending on the watch model (e.g. Mi Band 7 vs Xiaomi Watch S3), the firmware version and even the region of purchase. Some devices require connection to the Mi Fitness or Zepp Life app, others allow you to change the language directly in the settings of the gadget. We will describe each method in detail so that you can choose the best option.

If you're faced with a situation where the language you want is missing or the watch doesn't see the change, there's a section in the article that addresses common problems, and we've also prepared a table of methods compatibility with different models and an FAQ that answers frequent questions.

Preparation for the change of language: what to check before the beginning

Before you start changing your language, make sure that the following key conditions are met:

• 📱 Official app installed: Most Xiaomi Wear models will require Mi Fitness (for Mi Band) or Zepp Life (for Xiaomi Watch.
• 🔄 Updated firmware: The outdated version of the software may not support Russian or contain errors.
• 🔋 Battery charge: Make sure the clock charge is at least 50%. interruption of the process due to discharge can lead to failures.
• 🌍 Account Region: In some cases, the interface language is linked to the Xiaomi account region. If you use the Chinese version of the app, Russian may not be available.

Pay special attention to the model of your watch, for example, Mi Band 6 and later allow you to change the language through the application, and Mi Band 5 may require manual firmware. Below we will give a compatibility table.

2.Method 1: Change the language through the Mi Fitness/Zepp Life app.

This is the easiest and most recommended method for most users. The instructions are suitable for models Mi Band 6/7/8, Xiaomi Watch S2/S3, Redmi Watch 3 and other modern devices.

1. Open the Mi Fitness or Zepp Life app on your smartphone and connect to the watch via Bluetooth.
2. Go to the Profile section → My devices and choose your watch.
3. Click on the icon. ⚙️ Settings (or Device Management in Zepp Life).
4. Find the Display Language (or Display Language) and select “Russian” from the list.
5. Confirm the changes and wait for the synchronization (the clock will restart automatically).

If there is no Russian language on the list, check:

• 📲 App Version: Update it to the latest version in the store.
• 🌐 Account Region: Switch to “Russia” in Xiaomi profile settings.
• 🔄 Watch firmware: Outdated software may not support all languages.

⚠️ Note: Some models (such as Mi Band 5) may need to reset to factory settings after changing the language through the app. → System system → Reset on the clock.

Method 2: Manual language change on the clock (without attachment)

Some Xiaomi Wear models allow you to change the language directly in the device menu.

• 📵 You do not have access to a smartphone with an app.
• 🔄 The app does not offer the desired language.
• 🛠️ You use custom firmware (e.g., Amazfit Mod).

Instructions for a touch screen watch (Xiaomi Watch S2, Redmi Watch 3):

1. Swipe your finger up the screen to open the menu.
2. Find the icon. ⚙️ Settings (Settings) and tap it.
3. Scroll down to Language (or Chinese firmware).
4. Select "Russian" (or "Russian") from the list.
5. Confirm the choice and wait for the reboot.

Instructions for fitness bracelets (Mi Band 7):

1. On the home screen, swipe left to open the list of apps.
2. Find the icon. ⚙️ (Settings) and tap it.
3. Keep going until you see the language.
4. Select “Russian” and save the changes.

If the language has not changed after the change, try:

• 🔄 Restart the clock (press the power button for 10 seconds).
• 📱 Disable and reconnect the clock to the app.
• 🔧 Reset the settings to factory (Settings) → System system → Reset).

Method 3: Change of language through custom firmware (for advanced)

If official methods don’t work (for example, on Mi Band 5 with Chinese firmware), you can install a modified firmware with Russian support, which is only suitable for advanced users, since it requires unlocking the bootloader and using a PC.

Step-by-step:

1. Download firmware with support for Russian language for your model: 🔗 4PDA (section “Smart watches») 🔗 Amazfit Mod (for some Xiaomi models)

Install the drivers.

MiFlash

ADB

Unlock the loader

Xiaomi

Switch the device.

Fastboot

Gadgetbridge

⚠️ Warning: Wrong firmware can permanently put the watch out of order.If you are not sure of your actions, consult a specialist or use official methods.

Popular firmware with Russian language:

💡

Before you run the firmware, back up the clock through the official app, which will help you reset your settings if something goes wrong.

5. Compatibility table: what method is suitable for your model

To avoid wasting time trying to figure out methods, use the table below, which shows the supported language change methods for popular Xiaomi Wear models.

If your model is not in the table, check the region of purchase of the device. Watches purchased in China often have a limited list of languages, in which case only firmware or changing the region of the Xiaomi account will help.

6 Problem Solving: What to Do When Language Doesn't Change

Sometimes, even after you've done all the steps, the language stays the same, and let's look at the common causes and ways to address them.

• 🔄 App cache: Clear the Mi Fitness or Zepp Life cache in your smartphone settings (Settings) → Annexes → Mi Fitness → Memory. → Clear the cache).
• 📡 Unstable Connection: Disable Bluetooth, reboot the watch and smartphone, then re-sync.
• 🌍 Incorrect region: In Xiaomi account settings, select “Russia” or “Ukraine” (some models are critical).
• 🔋 Low battery charge: Connect the watch to charging and try again.
• 🛠️ Firmware failure: If the watch freezes or doesn't react, reset to factory settings (Settings) → System system → Reset).

If the Russian language is not on the list:

1. Check if the watch has Chinese firmware, and then the only thing that helps is flashing it.
2. Update Mi Fitness to the latest version – sometimes new languages are added in updates.
3. Try connecting the watch to another smartphone with the same app.

💡

If the watch is purchased in China, you can officially add Russian only through firmware, otherwise changing the account region or updating the software helps.

7. Frequent mistakes and how to avoid them

When changing languages, users often make the same mistakes, and here are the most common ones and ways to prevent them:

• 🚫 Ignoring the firmware version: Always check the relevance of the software before changing the language. Outdated firmware may not support Russian.
• 🔌 Interrupt sync: Do not turn off Bluetooth or leave the app while applying changes.
• 📱 Use of unofficial apps: Download Mi Fitness or Zepp Life only from official stores (Google Play, App Store).
• 🌐 Incorrect account region: If you are registered in a Chinese region, change it to “Russia” in your profile settings.
• 🔧 Reset without backup: Before resetting your settings, save data (steps, pulse, alarm settings) in the app.

Example of a typical error: The user changes the language on the Mi Band 5 watch through the app, but after synchronization nothing happens.

1. Turn off the watch from the app.
2. Reset the clock settings to factory (Settings → System → Reset).
3. Reconnect the clock and repeat the language change.

⚠️ Note: On some models (Xiaomi Watch) S1) After changing the language, the date and time format may be lost. → System system → Date and time and select the DD.MM.GYYG format.

FAQ: Answers to Frequent Questions