Xiaomi Mi True Wireless Earphones 2 Basic Connection: Full Photo Guide

Xiaomi Mi True Wireless Earphones 2 Basic wireless headphones have become a popular choice thanks to a combination of high-quality sound, compact design and affordable price. However, even with such simple gadgets, users often have questions: how to sync them with your phone, what to do if one earphone does not connect, or how to reset the settings to factory. This article will help you understand all the nuances from basic settings to solving typical problems.

The 2 Basic model features a simplified connection system without support compared to the more expensive versions. LDAC or AAC, but reliable SBC-We're going to look at not only the standard pairing procedure with Android and iPhone, but also hidden features like mono-connection or reset via a combination of buttons. And if you encounter a "Device not found" error, there's a separate solution section at the end of the article.

Preparing headphones for the first connection

Before you start syncing, make sure that the Mi True Wireless Earphones 2 Basic headphones are fully charged. The indicator on the case of the charging case should be lit white (when connected to charging) or green (when fully charged).

To activate the mating mode, follow the following steps:

• 🔋 Take both headphones out of the case - they will automatically turn on.
• 🔄 Wait for the headphone indicators to flash alternately red and white (meaning they’re ready to plug in).
• 📱 Turn on Bluetooth on your smartphone and start searching for devices.

If the lights don't flash, try resetting (instructions in the section below) and check if the connection is blocked by flight mode or energy saving mode on the phone - these features can interfere with the detection of headphones.

Step-by-step connection to an Android smartphone

On Android, the connection process is as simple as possible thanks to built-in Bluetooth 5.0 support.

1. Open Settings → Connected devices (or Bluetooth).
2. Activate Bluetooth if it is turned off.
3. In the list of available devices, find Mi True Wireless Earphones 2 Basic (may appear as MI TWS Earphones 2 Basic).
4. Click on the headphone name and confirm the connection.

After successful pairing, the device will be labeled Connected, and the headphones will automatically connect to the phone when removed from the case — if Bluetooth is on and the distance is less than 10 meters.

Headphones appear in the list of Bluetooth devices|The lights on the headphones are white (do not blink)|The sound is played synchronously in both headphones.|Microphone is working (check through voice recording)-->

Important! Some MIUI firmware (e.g. MIUI 12/13) may have a pop-up offering to install the Mi Earphones app, which is optional, but gives you access to additional settings like an equalizer or firmware update.

Synchronization with iPhone (iOS)

While Xiaomi is an Android-focused brand, the Mi True Wireless Earphones 2 Basic headphones work perfectly with the iPhone.

1. Go to Settings → Bluetooth.
2. Make sure that the Bluetooth slider is active (green).
3. Get the headphones out of the case - they should appear on the list as MI TWS Earphones 2 Basic.
4. Slip the name and wait for the sign to connect.

On iOS, you may have an issue with automatically reconnecting after the first pairing, so to avoid it, follow the additional step:

• 🔄 Once connected, turn off and turn on Bluetooth again on your iPhone.
• 🎧 Place the headphones back in the case, then pull them out again - this will secure the connection.

Also, the iPhone will not have a status headphone charge indication (unlike the AirPods).To check the battery, use the Battery widget (add it to the home screen via editing mode).

💡

If the headphones aren’t determined on the iPhone, try resetting the list of Bluetooth devices: Settings → Bluetooth → press “i” next to any device → Forget this device for all unnecessary gadgets.

Monoconnection (use of one headphone)

The mono-connection feature allows you to use only one headphone (for example, right or left) for power savings or convenience. In Mi True Wireless Earphones 2 Basic, it works by default, but there are nuances:

To activate the monomode:

1. Only take one headphone out of the case (for example, the right one).
2. It will automatically connect to the phone as a standalone device.
3. To return to stereo mode, place the headphone back in the case, then take out both.

If the monoconnection does not work:

• ⚡ Check that both earbuds are fully charged (a discharged earbud can block monomode).
• 🔄 Reset the settings (instructions in the next section).
• 📱 On Android, try disabling your headphones in Bluetooth settings, then plug in again.

Important: in mono mode, the microphone will only work on the connected earphone, and if you need to make a call through the left earphone, use it.

Resetting settings to factory

If the Mi True Wireless Earphones 2 Basic headphones are no longer connected, malfunctioning, or one of them is not detected, this procedure removes all saved connections and returns the device to its original settings.

For discharge:

1. Place both headphones in the charging case and close the lid.
2. Open the lid, then press the touch panels on both headphones at the same time (for 10-15 seconds).
3. The indicators will flash red, then white – this is a signal of a successful reset.
4. Close the case, wait 10 seconds and repeat the connection procedure from scratch.

After reset, the headphones may not immediately appear in the list of Bluetooth devices.

• 🔌 Connect the case to charging for 1-2 minutes, then try again.
• 📱 On your phone, turn off and turn on Bluetooth again.
• 🔄 Try connecting from another device (tablet, laptop) to check the performance of the headphones.

Common mistakes and their solutions

Even with the right connection, users face typical problems, and we've collected the most common ones and ways to fix them:

If the problem is not resolved, try updating your headphone firmware through the Mi Earphones app (available for Android). On iOS, updates are installed automatically when you connect to the Internet.

💡

Before contacting the service center, always try to reset your settings and connect to another device - this helps to eliminate software errors.

Additional settings and chips

The standard connection is just the beginning. Mi True Wireless Earphones 2 Basic has hidden features that will make it easier to use:

• 🎵 Equalizer: In the Mi Earphones app (for Android), you can preset the sound: Bass, Vocals, Classics. On iOS, set the equalizer through Settings → Music. → equalizer.
• 🔇 Transparency mode: Activated by double tapping on the earpiece, allowing you to hear surrounding sounds without removing your headphones (useful in transport).
• 🛡️ Protection against accidental touch: In the application settings, you can turn off touch buttons while listening to music.
• 🔋 Fast charging: 10 minutes in a case gives you up to 1.5 hours of playback. ~1.5 hours.

For gamers, it’s important to know that Mi True Wireless Earphones 2 Basic has a ~120ms latency (acceptable for movies, but noticeable in shooters).

• Use Game Sound Mode in Bluetooth settings (available on Xiaomi/Redmi with MIUI 12+).
• Disable other Bluetooth devices (fitness bracelets, smart watches) that may cause interference.

The headphones also support voice assistants (Google Assistant, Siri). To activate the assistant, tap the touchpad three times on any headphone.

FAQ: Frequent questions about Xiaomi Mi True Wireless Earphones 2 Basic

If your question is not covered in the article, check the official documentation on the Xiaomi website or contact the Mi Community app for support. For a diagnosis of hardware problems (for example, if the headphones are not charging), it is better to visit the service center.