Mi Band 2 Connection to Xiaomi Redmi: Full Instruction with Error Solutions

The Xiaomi Mi Band 2 fitness bracelet remains a popular gadget even years after its release, thanks to its simplicity, reliability and compatibility with modern smartphones. MIUI) This can cause complications, from the lack of a bracelet in the list of available devices to synchronization errors, and in this article we will discuss the step-by-step pairing algorithm, current settings and ways to fix typical problems.

It’s important to consider that the Mi Band 2 runs through the Mi Fit app (or its alternatives like Zepp Life) rather than the phone’s standard Bluetooth manager, which means that simply turning on Bluetooth on Redmi isn’t enough — you’ll need to adjust your access rights, update your bracelet firmware, and in some cases reset your bracelet. If you’ve previously used a wristband with another phone, the connection process to Redmi may be different.

This article is relevant for all Xiaomi Redmi models (including Redmi Note). 12/13, Redmi 10/11 and earlier versions) on the basis of MIUI 12–14 Android 10–14. The instructions are tested in practice and take into account the latest updates to the Mi Fit and Zepp Life apps (as of today). 2026 year).

1. Preparing Xiaomi Redmi phone for connection

Before pairing with the Mi Band 2, you need to configure the smartphone to avoid synchronization errors.

• 📱 Update. MIUI: Go to Settings. → The phone. → Update the system and install the latest patches.Oddated versions MIUI It may not support Bluetooth Low Energy protocols (BLE), bracelet.
• 🔄 Reset Bluetooth cache: In Settings → Connections → Bluetooth press the three dots in the top right corner and select Clear cache. This will delete old data about connected devices.
• 🛡️ Configure permissions: The Mi Fit app will require permissions to access geodata, notifications and physical activity. → Annexes → Permit management → Mi Fit.
• 📴 Turn off the power saving mode: In Settings → Battery → Power saving mode, add Mi Fit to the list of exceptions. Otherwise, the connection will break.

If you use Redmi with global firmware (for example, MIUI Global, there should be no problem, owners of Chinese firmware devices (MIUI China may require additional region settings in your Xiaomi account (see the connection error section).

⚠️ Note: If your Redmi is custom-built ROM (For example, LineageOS or Pixel Experience, pairing with Mi Band 2 may not work smoothly due to the lack of original Xiaomi Bluetooth drivers.

2. Installation and configuration of the Mi Fit application

The official Mi Fit app is the only reliable way to connect the Mi Band 2 to the Xiaomi Redmi. Alternatives like the Zepp Life or Mi Band Master may not support older bracelet models.

1. Download Mi Fit from Google Play or App Store (for iPhone).Redmi may need to be used for Chinese firmware APK-file from the official Xiaomi website.
2. Sign up for a Xiaomi account (or sign in to an existing one). Without an account, data sync won't work. If you already have an account but the bracelet isn't connecting, try logging out and re-signing in.
3. Select region: When you first launch, Mi Fit will suggest you specify the country. For Mi Band 2, it is optimal to choose China (even if you are not in China) - this minimizes synchronization errors.
4. Allow all requests: The app will request access to geolocation, notifications and health data, and the failure will result in limited functionality of the wristband.

After installation, update the Mi Fit firmware to the latest version.

1. Open the app and go to profile (the human icon in the lower right corner).
2. Press the gear (Settings) → About the programme → Check for updates.
3. If an update is available, install it and restart the app.

If the Mi Fit doesn’t see the bracelet after installing, try resetting the Mi Band 2 settings (see section 4). VPN — temporarily shut them down.

3. Step-by-step connection of Mi Band 2 to Xiaomi Redmi

When the phone and app are ready, start pairing:

1. Select Mi Band 2 from the list. If it's not available, scroll down and tap Another device, then type the name manually.

After successful connection, the Mi Band 2 will display the battery level on the screen, and the device control panel will appear in the Mi Fit. If the bracelet does not sync data (steps, pulse), go to the device settings in the application and click Sync manually.

💡

If the Mi Band 2 doesn’t respond to touches while connecting, charge it to 100% – with a low battery level, the touch button may not work.

4.Reset Mi Band 2 to factory settings

If the bracelet was previously paired with another phone or there are sync errors, perform a hard reset. This will delete all data from the device, but return it to its original state.

1. Disconnect the bracelet from the charging cable (if it is connected).
2. Find a small recess on the back of the Mi Band 2 with the inscription Reset (near the charging connector).
3. Take a paper clip or a toothpick and press the reset button. Hold it for 5-10 seconds until the bracelet vibrates three times in a row.
4. After the vibration, release the button, the bracelet will reset, and the Mi logo will appear on the screen.

If there is no physical reset button (some Mi Band 2 games do not have one), use the reset software:

1. Connect the bracelet to the charger.
2. Hold the Mi Band 2 button for 15 seconds until you feel the vibration.
3. Release the button and the bracelet will drop.

⚠️ Note: After resetting the Mi Band 2, you will need to reconfigure the time, units (kilometers/miles) and notification settings. These settings are set in the Mi Fit app after reconnecting.

5. Set up notifications and additional functions

By default, Mi Band 2 only shows the time and steps, SMS and messengers, perform the following steps in Mi Fit:

1. Open the Profile tab → Choose your Mi Band 2.
2. Go to Call Notifications and turn on the slider.
3. In the Notifications section, select messengers (WhatsApp, Telegram, Viber, etc.), alerts from which should be duplicated on the bracelet.
4. Set up the Vibration and Screenlighting at notifications (Inlay Additional).

For the correct operation of notifications on Xiaomi Redmi, you need:

• 📵 Disable battery optimization for Mi Fit in Settings → Battery → Optimizing the battery.
• 🔔 Allow auto-launch of the application: Settings → Annexes → Mi Fit → Auto-start.
• 🔕 Add Mi Fit to the exceptions for the mode Do not disturb.

If notifications are late or not coming at all, check:

• Is Bluetooth active on your phone?
• Does not block notifications with antivirus (for example, Avast or 360 Security)?
• Is Redmi Power Saving or Game Mode enabled (they limit the background activity of applications).

💡

For the notifications to work, the distance between the bracelet and the phone should not exceed 10 meters, otherwise the connection will break.

6. Solving common connection errors

Even with the right setup, Xiaomi Redmi users may encounter errors. Consider typical cases and ways to fix them:

Error: "I was unable to connect to the device"

Reasons:

• 🔌 Low charge bracelet (less than 20%) Charge it to 100%.
• 📱 Conflict with other Bluetooth devices. Turn off headphones, speakers, smartwatches.
• 🌐 Incompatible region in Xiaomi account. Change it to China in Mi Fit settings.

Solution: Reboot the phone and bracelet, then re-pair the pairing.

Error: "Brecelet firmware update ended with an error"

Reasons:

• 📶 Unstable Internet connection. Connect to Wi-Fi (mobile internet may not be suitable).
• 🔋 Charge Redmi to 50% or more during the upgrade.
• 🛑 Interrupting the process (e.g. closing the Mi Fit).

Solution: Reset the bracelet to factory settings and repeat the update.

Error: Bracelet connects but does not sync data

Reasons:

• ⏳ Lag in synchronization due to energy saving. Add Mi Fit to exceptions.
• 🔄 An outdated version of the app. Update Mi Fit.
• 📵 Bracelet out of range of Bluetooth (more than 10 meters).

Solution: Manually run synchronization in Mi Fit (click on the bracelet icon) → Synchronize).

If none of these methods worked, try removing the bracelet from the device list in Mi Fit and reconnecting it. Also check if the firewall is blocking the connection (e.g., AFWall).+ firewall MIUI).

7.Alternative applications for Mi Band 2

If Mi Fit is unstable or you don’t like its limitations, you can use third-party apps that support Mi Band 2 and offer advanced features:

• 📊 Notify & Fitness (for Android): Supports custom notifications, control gestures and advanced statistics.
• 🔄 Mi Band Master: Allows you to adjust vibration, lock screen and automatically turn off alarm clock.
• 🌍 Zepp Life (official): More modern interface, but may not support all of the features of the Mi Band 2.

To install alternative applications:

1. Disable Mi Band 2 from Mi Fit (remove it from the list of devices).
2. Install a new app and follow its connection instructions.
3. Allow all necessary rights (especially access to notifications and fitness data).

⚠️ Warning: Third-party apps may not support the bracelet firmware update. If Mi Band 2 stopped displaying time or steps correctly after connecting to alternative software, go back to Mi Fit and update the firmware.

8.Optimize the Mi Band 2 with Xiaomi Redmi

To ensure that the bracelet works stably and consumes the minimum amount of charge of the phone, follow these recommendations:

• 🔋 Turn off unnecessary notifications: In Mi Fit, leave only important alerts (calls, SMS, 1-2 messengers. The fewer notifications, the longer the bracelet battery will live.
• 📴 Set up automatic sync: In Mi Fit go to Device Settings → Autosynchronize and select the interval (e.g. every hour).
• 🛌 Use Do Not Disturb Mode: Activate it while you sleep so that the bracelet doesn't vibrate from nighttime notifications.
• 🔄 Regularly update your firmware: Check for updates in Mi Fit every 1-2 months.

To extend the battery life of Mi Band 2:

• Avoid full discharge – charge the bracelet at a charge level of 20-30%.
• Do not leave the bracelet on charging for more than 2 hours after reaching 100%.
• Keep the device in a dry place – moisture can damage the battery.

If the bracelet begins to discharge quickly, check whether a permanent pulsemeter or automatic sleep tracking is activated - these features significantly reduce the time of operation.

💡

Optimal battery life for Mi Band 2 with regular use (notifications + heart rate monitoring) is 10–14 days. If the bracelet discharges in 2–3 days, check for background apps that may be causing excessive Bluetooth activity.

FAQ: Frequent questions about connecting Mi Band 2 Xiaomi Redmi