How to connect Xiaomi remote to the TV: all ways + error solving

Xiaomi’s remotes have become an integral part of the brand’s smart device ecosystem, but their connection doesn’t always go smoothly. TV Sometimes you need to re-sync after resetting, and generic models like Xiaomi Mi Remote need to be set up properly to work with other manufacturers’ TVs. In this article, we will analyze all current ways of connecting - from automatic synchronization to manual code entry, as well as solve typical problems such as an unrecognized signal or "flickering" buttons.

The feature of Xiaomi remotes is their dual nature: they can work both on the classic IR protocol (infrared port) and on Bluetooth (in models with Mi support). TV This means that the connection algorithm will differ depending on the type of TV you have and the version of the remote. TV 4A/4S 2020–2023 The standard procedure will fit through the settings menu, and for the universal remote Xiaomi Smart Remote you will need to download the proprietary application. We will consider both scenarios, and also give recommendations on choosing a remote for older TV models.

Important: If your remote was working before, but suddenly stopped responding, the problem may not be synchronization, but in dead batteries or mechanical damage to the contacts. Before you start setting up, check these points — in 60% of cases this solves the problem without additional manipulation.

1. How to determine the type of your Xiaomi remote

Before you connect, you need to know which remote you are dealing with, which determines the way you sync and the possible nuances. All Xiaomi remotes can be divided into three categories:

• 📺 Original remotes for Mi TV — It comes with Xiaomi TVs (e.g. Mi). TV 4A 32" or Mi" TV Q1 55). Work on Bluetooth and IR simultaneously, support voice control.
• 🎮 Universal remotes such as Xiaomi Mi Remote or Xiaomi Smart Remote Pro. TV Other brands (Samsung, LG, Sony, require settings through the application.
• 🖥️ Remote for Mi Box/TV Stick – compact consoles for media consoles (Mi Box S, Mi) TV Stick 4K). Connect only via Bluetooth, do not have an IR transmitter.

To identify your remote, pay attention to:

• 🏷️ Inscriptions on the case: the original remotes have the Mi logo TV, The universal inscription Mi Remote.
• 🔍 IR transmitter: If there is a small transparent window on the top end of the remote, it supports an infrared signal.
• 📱 Supporting documents: In the instructions or on the box indicated supported models TV.

If you're using a remote from the Mi Box, but you're trying to connect it to the TV directly, it's useless. TV. In this case, you need to turn on the Mi Box, press the Home buttons. + Back for 5 seconds to reset, and then repeat pairing through the console menu.

2. Connecting the original Xiaomi remote to the Mi TV

Original remotes, which come with Xiaomi TVs, are automatically connected when you first turn on TV. However, if the synchronization is lost (for example, after updating the firmware or replacing the batteries), you will need to re-pair:

1. Turn on the Xiaomi TV with the power button on the case (if the remote does not respond).
2. Bring the remote control to a distance of no more than 1 meter to the TV.
3. Press the Menu (or Home) buttons at the same time) + Back (back) for 10-15 seconds, until the indicator on the remote starts flashing double flashes.
4. The TV will display a notification "Connect remote..." Wait for the process to be completed (usually takes 20-30 seconds).

If the remote does not work after these actions:

• 🔋 Check the batteries (even new batteries can be discharged).
• 📶 Make sure that between the remote and TV No obstacles (glass, metal, other devices).
• 🔄 Restart the TV through the Settings menu → On TV. → Reboot.

Replace batteries with new ones (CR2032 or AAA)

Make sure TV netted

Place the remote at a distance of up to 1 m from the TV

Remove obstacles between the remote and the IR receiver-->

For Mi models TV 2022-2026 (e.g. Mi) TV Q2 75" or Mi" TV A2 43”) an additional step may be required: after holding the buttons, the pairing on the screen must be confirmed. TV, Select "Confirm" in the window that appears. If the window doesn't appear, try holding the Home buttons. + OK.

⚠️ Note: On Xiaomi TVs with firmware MIUI TV 3.0 and higher (released after 2021) can block the connection of remotes from older models. TV through settings → On TV. → Updating the system.

3. Customization of the universal remote Xiaomi Mi Remote

Xiaomi Mi Remote universal remotes (including Pro and Lite versions) require pre-configuration through a mobile app, and are compatible not only with Xiaomi TVs, but also with devices from other brands (Samsung, LG, Philips et al. Here's how to plug them in:

1. Download the Mi Home app (available for Android and iOS) and log in to your Xiaomi account.
2. Add a new device: press "+" → "Add the device" → "DU remote".
3. Select your remote model from the list (e.g. Xiaomi Mi Remote Pro).
4. Follow the instructions on the screen: the application will offer to bring the remote to the smartphone for pairing over Bluetooth.
5. After successfully connecting to your phone, select the type of device you manage ("TV") and the brand (Samsung, LG etc.).
6. The app will suggest testing the buttons. If some keys don't work, try manually entering the code (the list of codes for popular brands is below).

Critical detail: Xiaomi’s universal remotes don’t support some older TV models (released before 2010) as they use outdated IR protocols. Check compatibility on mi.com before buying.

If the automatic code search does not work:

1. In the "Mi Home" app, go to the remote settings.
2. Select "Manual Code Entering".
3. Enter the first code from the table above and check the reaction. TV.
4. If the buttons don’t work, try the following code.

💡

If the remote is connected, but not all buttons are working (for example, there is no volume control), try resetting the remote settings in the Mi Home app and repeat synchronization with another code from the list.

4. Connecting the Xiaomi remote to the Mi Box or TV Stick

Remote consoles for Mi Box S, Mi TV Stick 4K or Mi Box 4 is Bluetooth-only and not directly compatible with TVs. If your remote is no longer working with the console, follow these steps:

1. Remove the batteries from the remote for 30 seconds, then insert them back in.
2. Turn on the Mi Box and wait for the main screen to load.
3. Press and hold the Home buttons. + Back on the remote for 5-7 seconds, until the indicator starts flashing blue.
4. On the console screen, a notification will appear "New remote is detected. Connect?". Select "Yes".

If no conjugation occurs:

• 🔄 Reboot the Mi Box through the Settings menu → The device → Reboot.
• 📱 Update the console firmware to the latest version (in the Settings menu) → About the device → Updating the system).
• 🔌 Connect the console to another. USB-TV port (sometimes the cause of the failure is insufficient power supply).

For Mi. TV Stick (Models 2021-2026) may require an additional step: after holding the buttons on the remote, you need to manually select it from the menu of Bluetooth console devices (Settings) → Devices → Bluetooth).

⚠️ Note: The 2017 Mi Box 3 remotes are not compatible with the new 2019 and later Mi Box S consoles due to a change in Bluetooth protocol, in which case you will have to buy a new remote or use the Mi Remote app on your smartphone.

5. Solving problems with the remote connection

If Xiaomi’s remote doesn’t connect despite all efforts, the reasons could be both software and hardware.

🔴 The remote does not respond at all (no indication)

• 🔋 Replace the batteries with new ones (even if the old ones "seem to work"). Use the same type of batteries (e.g., only the same type of batteries). CR2032 or AAA).
• 🧲 Check the polarity of the battery installation (the remote body usually has a circuit).
• 🛠️ Disassemble the remote and clean the contacts of the battery compartment with alcohol (oxidation can block power).

🟡 The remote is connected, but the buttons are not working properly.

• 🔄 Reset the remote settings: for original models, hold on to Menu + Back 20 seconds; for universals, use the Reset option in the Mi Home app".
• 📋 Reprogram the buttons through the remote settings menu → Customization of buttons (available in "Mi Home").
• 🛡️ Turn off the Parental Control feature on the TV, which may block some commands.

🟢 The remote is running, but the signal is interrupted.

• 📶 Make sure that between the remote and TV no sources of interference (Wi-Fi routers, microwaves, wireless headphones).
• 🔋 If you have a Bluetooth remote, check the charge level of the Mi Box (low battery charge can cause communication breakdowns).
• 🔄 Reconnect the remote manually via the Bluetooth menu to TV or.

To diagnose hardware faults of the remote, you can use the IR signal test:

1. Open the smartphone camera and point the remote control over the lens (the IC signal will be visible as a purple flicker).
2. If there is no signal when pressing buttons, the IR transmitter is defective.
3. If there's a signal, but TV Not responding - the problem is in the TV receiver.

6.Compatibility of Xiaomi remotes with TVs of other brands

Xiaomi Mi Remote Remote officially supports more than 5000 models of TVs from 200+ brands, but there are nuances:

• 📺 Samsung: Full compatibility with 2015 and newer models TV (2010–2014 – manual code entry may be required.
• 📺 LG: It does not work with OLED TVs until 2018 due to proprietary protocol LG ThinQ.
• 📺 Sony: All Android models are supported TV, Bravia 2012-2016 requires special codes (see table above).
• 📺 Philips: Xiaomi’s universal remotes are not compatible with TV Saphi-based OS (Use the code 0180 for Android TV).

To check compatibility:

1. Go to the site. mi.com/global/mi-remote/.
2. Choose your remote model (Mi Remote Pro, Mi Remote Lite, etc.).
3. Type the make and model of the TV in the search bar.

If you TV Not found in the database, try it:

• Use the training mode in the application "Mi Home" (the remote "remembers" signals from the native remote control) TV).
• Connect the remote via Google Home (if the TV supports Google Assistant).
• Buy a Xiaomi Mi adapter IR Blaster (connects to the TV through USB and expands compatibility).

💡

Xiaomi’s universal remotes do not support TVs with proprietary protocols (such as some Panasonic or Toshiba models before 2017), in which case you will have to use the original remote or buy an adapter.

7. Alternative ways to control Xiaomi TV

If you can not connect the physical remote, you can use alternative methods:

• 📱 The Mi Remote app (available for Android and iOS) supports Wi-Fi or IR control (if there is an IR port in the smartphone).
• 🎮 Game controllers: Xiaomi Game Controller or Xbox/PS-The controller can be connected to the Mi TV Bluetooth for basic control.
• 🖥️ Voice assistants: if the TV supports Google Assistant or Alice, you can use voice commands through the Xiaomi Smart Speaker column.
• 🖱️ Mouse and keyboard: connect via Bluetooth or USB-debugging (must be included) ADB developer-setting TV).

To control via smartphone:

1. Download the Mi Remote app from the App Store or Google Play.
2. Connect your phone and TV to the same Wi-Fi network.
3. In the app, select "Television" → "Xiaomi and follow the instructions on the screen.
4. If Wi-Fi is not working, use the smartphone’s IR port (if any).

To connect the keyboard or mouse:

1. On the TV, go to Settings. → Bluetooth.
2. Turn on device search mode.
3. Activate pairing on the keyboard / mouse (usually hold the button on 3-5 seconds).
4. Select the device in the list found on TV.

If you are using Mi TV Stick, you can control the TV through HDMI-CEC:

• Turn on the function. HDMI-CEC customized TV (It's usually called "Anynet."+" Samsung or "Simplink" LG).
• Connect Mi. TV Stick to HDMI-marked-point "ARC" or "CEC".
• Now the remote from the TV will control the console (for example, the volume buttons will work for both devices).

FAQ: Frequent questions about connecting Xiaomi remotes