Connecting the remote to the Xiaomi Mi TV TV 4A: all ways and solutions to problems

Xiaomi Mi TVs TV 4A They are popular because of the combination of affordable prices and modern features, but even with such a reliable device, problems can arise, for example, when a new or spare remote control unit refuses to sync with the TV. from dead batteries to firmware failure, but in 90% of cases, the decision takes no more than 5 minutes.

This article will help you understand how to properly connect the remote to the Mi TV 4A (Including models 32, 43, 50 and 55, even if the original remote is lost or broken, we will look at the standard synchronization procedure, alternative methods through the application and physical buttons on the TV, and we will also look at common errors that may cause the remote to fail. Special attention will be paid to models with Bluetooth-based remotes (for example, Mi). TV Stick or Mi Box, as their connection is different from traditional IR remotes.

If you've tried to replace batteries, but the remote still doesn't respond, don't rush to buy a new one. It could be the settings of the TV or the mechanical damage to the infrared receiver. Below you'll find step-by-step instructions for all scenarios, from the simplest to the most complex.

1. How to determine the type of remote on Xiaomi Mi TV 4A

Before you start connecting, it's important to understand what kind of remote you're holding. How you sync it depends on that. TV 4A Supports two types of remotes:

• 📶 The infrared remote is the most common option, operates through an infrared port on the front of the TV, requires direct visibility, but does not need pre-sync (except when settings are reset).
• 🔵 Bluetooth remote – used in some models (e.g. Mi) TV 4A Pro or bundled with Mi Box S. Connects wirelessly and requires pairing like any Bluetooth device.

To determine the type of your remote:

1. Look at the front panel of the TV: if there is a small transparent window (usually to the left or right of the logo), then an IR remote is supported.
2. Turn over the remote and check for an infrared emitter (the small window at the top), if it's not there, it's a Bluetooth model.
3. Try using the remote 5-10 meters away from the TV, if it works, it's Bluetooth, if it doesn't (or requires direct visibility) it's IR.

You can also look at the documentation of the TV or the remote control, and the box or the manual usually has the protocol: IR (Infrared) or Bluetooth. If you use a remote from another device (such as a universal), check it for compatibility with Mi. TV 4A manufacturer's website.

2. Connecting an IR remote to Xiaomi Mi TV 4A

If you have a standard infrared remote, the connection procedure is as simple as possible. In most cases, just insert the batteries and the remote will start working immediately.

1. Check the batteries. Make sure they're inserted correctly (polarity observed) and not discharged. Try replacing them with new ones, even if the old ones seem to work.
2. Reset the TV. Turn it off for 30 seconds, then turn it back on, and it will reset the IR-receiver's temporary errors.
3. Check visibility. Make sure there are no obstacles (glass, furniture) between the remote and the TV. The maximum distance for an IR remote is 8 meters.
4. Reset the remote settings. Some models have a small Reset button on the back. Press it with a pin and hold it for 5 seconds, then try again.

If the remote is still down, you might need to force synchronization.

1. Turn on the TV with the power button on the case (usually located on the side or back).
2. Point the remote to the IR receiver (window on the front panel) and hold the button. OK (or Menu for 10-15 seconds.
3. If the monitor on the remote flashed, the sync was successful. If not, repeat the procedure.

If none of these things worked, the problem could be the TV's IR receiver itself, in which case you can try connecting the remote via the Mi Remote app (more on this below) or contact the service center, and check if the TV is activated in the "For Kids" mode, which can block some of the remote's functions.

3. Synchronize Bluetooth remote with Mi TV 4A

Bluetooth remotes (such as those that come with Mi) TV 4A The Pro or Mi Box requires you to pair it with the TV, which is a little bit more complicated than the IR remote, but it also takes a couple of minutes:

1. Turn on the TV and go to the settings menu: Settings → Devices → Bluetooth.
2. Activate device search mode. A list of available gadgets will appear on the screen.
3. Turn on the Bluetooth remote by holding the Power button (or Pair, if any) for 3-5 seconds until the indicator starts flashing.
4. In the list on your TV, find the name of your remote (usually Mi Remote or Xiaomi). TV Remote and select it.
5. Confirm the pairing on the TV and remote (if necessary).

If the remote does not appear in the list, try the following:

• 🔄 Reboot the TV and remote (remove the batteries for 10 seconds).
• 📱 Make sure there are no other active Bluetooth devices (headphones, smartphones) within a radius of 10 meters that can cause interference.
• 🔧 Update your TV firmware to the latest version (instructions in the section below).

Once you've successfully connected, check all the buttons. If some of them don't work (such as volume control or channel switching), you may need to update the remote's firmware.

1. Connect the remote to the TV via Bluetooth.
2. Go to Settings → About the program → Update the remote control.
3. If an update is available, follow the instructions on the screen.

4.Using a smartphone as a remote for Xiaomi Mi TV 4A

If the original remote is lost or broken, you can temporarily control the TV via your smartphone, using the official Mi Remote app (available for Android and iOS) or universal apps like the Peel Smart Remote, which has the advantage of not having to buy a new remote, but being as complete as the new remote.

Instructions for setting up Mi Remote:

1. Download and install the Mi Remote app from Google Play or the App Store.
2. Open the app and allow access to Bluetooth and IR port (if any).
3. Click Add Device and select Television category.
4. In the list of brands, find Xiaomi and choose the Mi model. TV 4A (or Mi TV 4 if your model is not present).
5. Follow the instructions on the screen to sync. If the TV supports Bluetooth, the app will suggest you connect through it, and if not, the smartphone's IR port will be used.

If the app does not find the TV:

• 📲 Make sure your smartphone and TV are connected to the same Wi-Fi network (for some features, such as voice control).
• 🔄 Reboot both devices.
• 📶 Check if Bluetooth is on on your TV (Settings) → Devices → Bluetooth).

Important: If your smartphone doesn’t have an IR transmitter, the Mi Remote app will only be able to control the TV via Wi-Fi or Bluetooth, which means you’ll have to use a button on the body to turn the TV on, and all other functions will be available from the smartphone.

💡

If you have an iPhone without an IR port, use the Mi Home app instead of Mi Remote.It supports Wi-Fi management and allows you to turn on your TV over the network (if it was pre-connected to your Xiaomi account).

5. Manual control of the TV without remote control

If the remote is lost and the smartphone isn't on hand, you can still turn on the TV and perform basic settings using physical buttons on the case.On Xiaomi Mi models TV 4A buttons are located on the right or left side (depending on the diagonal):

• 🔘 Power - button on/off.
• 🔽 Volume -/+ — volume control.
• 🔄 Source/Input — switching (HDMI, AV etc.).
• 📺 Menu/OK — menu entry or selection confirmation.

To turn on the TV without the remote:

1. Find the Power button on the case (usually highlighted in red).
2. Press and hold it for 1-2 seconds until the indicator lights up.
3. If the TV doesn’t respond, check if it’s connected to the outlet (sometimes the cable may come off).

To navigate the menu, use a combination of the Volume (up/down) and Menu (select) buttons, for example, to open the settings:

1. Press Menu once.
2. With volume buttons, select Settings.
3. Press Menu again for confirmation.

If you need to connect a new remote but don’t have an old one, reset your TV settings via physical buttons:

1. Turn off the TV with the Power button.
2. Press and hold Menu and Volume at the same time.
3. Without releasing the buttons, press the Power once.
4. Hold on to Menu. + Volume – 10-15 seconds until the recovery menu is available.
5. With the volume buttons, select Wipe. Data/Factory Reset and confirm the choice.

💡

Resetting will remove all installed apps and accounts, and once you reboot, the TV will be as new as it is, and you can connect the remote in the standard way.

6. Solving common remote control problems

If the remote is still not working, check the following points:

If none of these things worked, there might be a problem with the TV itself.

• 🔌 The efficiency of the IR receiver (point the smartphone camera at it and press the button on the remote - if you see a blink, the receiver is serviceable).
• 📡 Availability of firmware updates (Settings) → About the programme → Updating the system).
• 🛠️ Integrity of the plume connecting the front panel to the motherboard (requires disassembly of the TV).

💡

If you suspect an IR receiver malfunction, try controlling the TV through HDMI-CEC. To do this, connect the device (for example, a console or Blu-ray player) to HDMI-port and enable the function HDMI-CEC in the settings of the TV (Settings) → HDMI-CEC → Turn on).

7. Update firmware to fix remote control problems

Sometimes the reason for the remote is outdated firmware TV, the manufacturer regularly releases updates that correct errors in the IR receiver and Bluetooth module. TV 4A:

1. Go to Settings → About the program → System update.
2. Click Check for updates.
3. If a new version is available, click Download and Install.
4. Wait until the process is complete (the TV will restart automatically).

If the TV does not find updates via the Internet, you can install firmware manually:

1. Download the latest firmware version for your model from the official Xiaomi website.
2. Copy the file (usually with the.zip extension) onto a flash drive formatted in FAT32.
3. Put the flash drive in. USB-television-port.
4. Go to Settings. → About the programme → Updating the system → Update through USB.
5. Select the downloaded file and confirm the installation.

Important! Don't turn off the TV during the upgrade. If the process is interrupted, it can lead to a blink (routine break) and the TV will stop turning on, in which case you will need to flash through the service port (only in the workshop).

8. Alternative ways to control the TV

If standard methods don’t work, consider alternative management options for Xiaomi Mi. TV 4A:

• 🎮 Gaming Pad. Connect via Bluetooth controller from Xiaomi Game Controller or Sony DualShock. In the settings of the TV, select Game Devices and follow the pairing instructions.
• 🖱️ Mouse and keyboard. Connect the wireless mouse through the keyboard. USB-It's a receiver or Bluetooth. It's convenient for navigating menus and typing text.
• 🗣️ Voice control: If your TV supports Google Assistant or Alice, activate voice search with a button on the remote or through the microphone of your smartphone (in the Mi Remote app).
• 📱 Universal remotes, like Logitech Harmony or BroadLink. RM4. They need to be configured through a special application, selecting the Xiaomi Mi model. TV 4A.

To connect the mouse or keyboard:

1. Go to Settings → Devices → Bluetooth.
2. Turn on search mode.
3. Activate pairing on the mouse/keyboard (usually there is a special button).
4. Select the device from the list on the TV.

If you use HDMI-device (e.g., Mi Box), you can control the TV through its remote if the function is enabled HDMI-CEC. For that:

1. Connect the device to HDMI-port.
2. In the settings of the TV, activate HDMI-CEC (Settings → System system → HDMI-CEC → Turn on).
3. Now the console will control the main functions of the TV (on, volume, switching inputs).

💡

Function HDMI-CEC It allows you to control multiple devices from a single remote, which is convenient if you have a receiver, sound bar or game console connected.

FAQ: Frequent questions about connecting the remote to Xiaomi Mi TV 4A