How to connect Tricolor to the TV Xiaomi Mi TV: way + mistake-making

Introduction: Compatibility of Tricolor and Xiaomi Mi TV

Connection of Tricolor satellite TV to Xiaomi Mi TVs TV (including the Mi models TV 4S/4A/5/5X/Q1/Q2) It's possible in a number of ways, but it requires a lot of technical considerations. DVB-S2 The tuner in most of Xiaomi's smart TVs means that direct satellite signal reception is not possible without additional equipment.

In this article, we will analyze all the current ways to connect Tricolor to Xiaomi Mi TV 2026, including the use of external receivers, CI-modules (for models with support) and alternative solutions over the Internet. Also consider the typical configuration errors and how to fix them.

How to connect Tricolor to Xiaomi Mi TV

The choice of method depends on the model of your TV and the equipment available.

• 📺 Through an external receiver (the most reliable method, suitable for all Xiaomi models)
• 🔌 Through CI-module (only for TVs with connector) CI+, Like Mi. TV Q1 75")
• 🌐 Through the Tricolor TV app (streaming over the Internet, requires a subscription)
• 🔄 Through AV-cable (obsolete method, suitable for older receivers without HDMI)

Let’s consider each method in detail, with an indication of pros and cons.

Method 1: Connection via external receiver (recommended)

This is a universal method that works on all Xiaomi Mi models. TV, including budget series 4A and 4S. You'll need it:

• 📡 Satellite antenna (plate) with converter
• 🖥️ Tricolor receiver (e.g, GS B521, GS E501 or GS U510)
• 🔌 Cable HDMI (Version 2.0 or higher is recommended for Full HD)
• 🔌 Sat-In Cable (to connect antenna to receiver)

Step-by-step:

1. Connect the satellite antenna to the receiver via the LNB IN connector.
2. Connect the receiver and TV Xiaomi Mi TV cable HDMI (use the port HDMI 1 HDMI 2 marked ARC, if).
3. Turn on the receiver and TV, then on the Xiaomi remote, click the Input button (or Source) and select the appropriate one. HDMI-port.
4. Follow the instructions on the receiver screen to adjust the satellite signal (the level must be at least 70%).

If the image does not appear:

• Check that the cable HDMI Connected to the working port (on some models Xiaomi port) HDMI 3 may be intended to be used for ARC and not support the input signal).
• Restart the receiver and TV (turn off power for 30 seconds).
• In the receiver menu, select permission. 1080p or 720p (Depending on the Xiaomi Mi model TV).

💡

If the message "No signal" appears on the screen, try changing the setting in the receiver menu. HDMI Mode on RGB or YCbCr 4:2:2.

Method 2: Connection through CI-Module (only for selected models)

Some models of Xiaomi Mi TV (for example, Q1 75" or" Q2 65) equipped with a connector CI+, plug-in CAM-It's a way of decoding a satellite signal without an external receiver:

• ✅ No separate receiver (saving space) is required).
• ❌ It only works with Tricolor TV standard modules. CI+ 1.3 or higher.
• ❌ Not all channels can be decoded (depending on the module version).
• ❌ No support for functions PVR (transmission).

Instructions for connection:

1. Buy it. CI-Tricolor module (e.g, CAM-module GS C591).
2. Insert the module into the connector CI+ on the back of the TV (usually closed with a cover).
3. Connect the satellite cable directly to the TV to the Sat-In connector.
4. Xiaomi Mi menu TV Go to Settings. → Channels → Satellite channel configuration.
5. Select the Eutelsat satellite 36E and run an automatic search.

If the channels are not:

• Make sure the antenna is tuned to satellite 36.° (e) the signal level must not be lower than 60%).
• Check if your Tricolor access card is activated (call support by number) 8 800 500-01-23).

Method 3: Connection via Tricolor TV (Internet broadcast)

If you don't have a satellite antenna or you don't want to use a receiver, you can watch Tricolor channels through the official app.

• 🌐 Stable Internet connection (speed from 15 Mbit / s for HD).
• 📱 Tricolor account with active subscription to the channel package.
• 📺 Xiaomi Mi TV TV Android-based TV (All models except the oldest ones).

How to install and configure the application:

1. Open Google Play on your TV (Apps button on the remote).
2. Find the Tricolor TV Online app and install it.
3. Launch the application and log in using a login / password from the Tricolor personal account.
4. Select the channel package included in your subscription.

Advantages of the method:

• ✅ No need to tune the antenna.
• ✅ Access to the archive of programs (function Tricolor Cinema and TV).
• ✅ The ability to watch on multiple devices at the same time.

Disadvantages:

• ❌ Dependence on Internet speed (with the <10 Mbps possible to slow down).
• ❌ Not all channels are available in streaming (no regional versions available).
• ❌ Ether delay (up to) 30-60 seconds relative to satellite signal).

💡

Tricolor TV Online does not replace satellite broadcasting, it is an add-on. Some channels (such as Match TV or TNT4) may not be available in the online version.

Method 4: Connection through AV-cable (for old receivers)

If your Tricolor receiver is not equipped with an exit HDMI (For example, outdated models GS 7300 or GS 8300), a composite may be used (AV) It's called a component cable, or a YPbPr cable, but there are serious limitations to this method:

• ⚠️ The image quality will be worse (maximum) 576i for AV).
• ⚠️ New models of Xiaomi Mi TV (Like Mi. TV Q2) Maybe there's no connector. AV.
• ⚠️ Adapter required AV → HDMI (cost ₽).

Instructions:

1. Connect the cable. AV (Yellow - video, red / white - audio) to the receiver.
2. If there's no connector on the TV AV, Use an AV-to-HDMI adapter (e.g. Neoteck) NTK-P01).
3. In the TV menu, select the source. AV or HDMI (if the adapter is used).
4. Set the receiver to output the signal through CVBS (composite).

💡

If the image is black and white, make sure the cable is connected to the correct connectors (yellow is video, red/white is audio). PAL receiver-setting.

Compatibility table Xiaomi Mi TV tricolor

Not all Xiaomi Mi models TV They work equally well with Tricolor. Below is a compatibility table for popular series:

For models without CI+ (for example, 4A or P1) The only reliable way is to have an external receiver, if your TV supports you. CI+, but the channels do not show, check the module version (must be at least 1.3).

Typical errors and their solution

When connecting Tricolor to Xiaomi Mi TV Users often face the following problems:

• 🔴 "No signal on HDMI-port.
• 🔴 Channels are not automatically searched.
• 🔴 Image is there, but no sound (or vice versa).
• 🔴 The Tricolor TV app gives an error "Error 1001".

We will discuss the solutions for each of them:

1. No signal on. HDMI

Possible causes and ways of elimination:

• 🔌 Check the cable. HDMI For damage (try another cable).
• 🔄 Restart the receiver and TV (unplug the network for 1 minute).
• 📺 In the receiver menu, change the output resolution to 1080p or 720p.
• 🔧 On Xiaomi TV, go to Settings → Display and sound → Regime. HDMI and choose PCM auto.

2. Channels are not in search

If the TV or receiver does not find the Tricolor channels:

• 📡 Check the signal level in the receiver menu (should be) >70%).
• 🔍 Make sure you select the right search options: Satellite: Eutelsat 36E (36.0° Frequency: 12226 MHz Symbolic speed: 27500 Polarization: Left (L)
• 🔄 Update the list of transponders in the receiver (in the Settings menu) → Installation → Update of channel list).

3.No sound when connected via HDMI

If there is a picture but no sound:

• 🔊 On the Xiaomi Mi remote TV press the Settings button → Sound. → Exit HDMI and choose PCM.
• 🔧 In the receiver menu, change the audio format to Stereo instead of Dolby Digital.
• 🔄 Reconnect the cable. HDMI (Sometimes changing the port helps).

Error 1001 in the Tricolor TV app

Error 1001 means authorization problems.

• 🔄 Re-enter your account (come out and log in again).
• 📱 Check whether the subscription is active in the personal account on the Tricolor website.
• 🔧 Update the application to the latest version.
• 🌐 If you use VPN, Disable it (the application may block access due to geolocation).

💡

If none of the methods helped, reset the receiver settings to factory (Settings) → Reset) and repeat the setting from scratch.

FAQ: Frequent questions about connecting Tricolor to Xiaomi Mi TV