Setting up quick access buttons on Xiaomi: a complete guide with hidden chips MIUI

Quick access buttons on Xiaomi smartphones are one of the most underrated tools MIUI, It can save minutes of daily time, and many users don't even realize that the notification panel can be customized completely, such as adding switches for hidden functions, changing the order of items, or removing unnecessary shortcuts. Meanwhile, competent setting allows you to get instant access to the NFC, IR port, game mode or even launching specific applications – without unnecessary clicks.

In this article, we’ll look at not only the basics (how to add or remove a button), but also the hidden features that Xiaomi doesn’t advertise, such as how you could create a virtual quick-to-access button for any action through the Quick Commands app. Or that on some models (for example, Xiaomi 13 Ultra or Redmi Note 12 Pro)+) Is it possible to set up double-click on the switchboard to activate additional functions? If you want to squeeze the maximum out of your smartphone - read more.

1.Where to find the Quick Access Panel on Xiaomi

The Quick Access Panel (also called the “curtain” or “notification center”) opens with a swipe from top to bottom of the screen. POCO, Redmi and flagship series, it is divided into two parts:

• 📱 Left-hand side – notifications from applications (messages, calls, reminders).
• ⚙️ The right side is the fast access switches (Wi-Fi, Bluetooth, flashlight, etc.).

To get into the panel settings, do the following:

1. Open the curtain with a swipe down.
2. Click on the icon. ✏️ "Edit" (usually located in the lower right corner).
3. The customization menu will open before you.

If there is no editing icon, then you have an old version installed. MIUI (In this case, the path will be different: Settings → Screen. → Notification panel.

2. Basic setting: Adding and removing buttons

The simplest thing you can do with a quick access panel is to move, add or remove unnecessary switches.

1. Open the panel editor (as described in the previous section).
2. At the top of the screen you will see active buttons (the ones that appear in the curtain).
3. Below is a list of available buttons that can be added.
4. To remove the button, drag it down to the Unused area.
5. To add, drag the desired icon up.

Note that some tumblers (such as Airplane Mode or Flashlight) cannot be removed, they are fixed by the system. POCO with custom assemblies) may not be possible to edit at all.

Add new tumblers|Remove unnecessary|Change the order|Record the frequently used|Reset to factory settings-->

Among the most useful buttons that you should add:

• 🔦 Night mode – quick inclusion of dark theme.
• 📶 Mobile data is convenient if you switch between Wi-Fi and 4G/5G.
• 🎮 Game mode – disables notifications and optimizes performance.
• 🔄 Autoturn – if you often watch videos in landscape orientation.
• 📱 Silent mode – quick access to sound settings.

💡

If you use it often NFC for payment, add his switchboard in the first line of the curtain - this will speed up the payment process in stores.

3. Hidden features: double-press and fast commands

Few people know, but on some Xiaomi models (starting with the MIUI (13) double-pressing of the toggles is supported:

• 🔦 Double-clicking on the flashlight can enable flashing mode (useful in emergency situations).
• 📶 Double-clicking on Wi-Fi opens up list of available networks.
• 🔊 Double tap on Sound switches profiles (call/vibration/silent).

To check if your smartphone supports this feature:

1. Press any button in the curtain with your finger. 2-3 seconds.
2. If you have a context menu or additional action, the function is active.

Another hidden feature is Quick Tools, which allows you to create custom buttons for any action, even if it's not on the standard list, for example, you can add a shortcut to:

• 📸 Quick camera start in Pro mode.
• 🎵 Discovery of the last listened playlist in Mi Music.
• 📡 Including a hotspot with a pre-set name and password.

How to set it up:

1. Open Settings → Special Opportunities → Quick Teams.
2. Click Add a command and select an action.
3. Save and add the command you created to the Quick Access Panel via the editor.

4.Setting up quick access buttons on a locked screen

On Xiaomi smartphones, you can set up some switches right on the lock screen, which is handy if you need to turn on your flashlight or Wi-Fi quickly without unlocking your phone. Here's how to do it:

1. Go to Settings → Lock screen.
2. Select Quick Access Buttons (or Lock Screen Shortcuts in older versions) MIUI).
3. Activate the switch and select the desired buttons (usually available) 2-4 slot).

The list of available buttons on the lock screen is limited for security reasons.

It's important, if you're using PIN-code or pattern lock, some buttons (e.g. Camera) may require unlocking to fully access functions.

💡

On the lock screen, it is better to leave only the most necessary buttons - this reduces the risk of accidental pressing and saves battery power.

5. Problems and errors in setting buttons

Sometimes users find that the quick access buttons do not save, disappear after a reboot or do not respond to clicks.

• 🔄 Buttons are reset after the update This is a typical error MIUI Solution: Go to the curtain editor, press Reset (if you have one) and reset the buttons.
• 🚫 Some switches are inactive (grey) This means that the function is disabled at the system level, NFC It can be inactive if there is no chip in the phone. → Connections.
• 📱 The curtain is slowing down or hanging down Most often it is due to overload of animations. Try to turn off the animation of windows in Settings. → Special facilities → Animation settings.
• 🔧 There is no "Edit" button in the curtain This may be due to custom firmware or manufacturer restrictions (for example, on some of the POCO Solution: Update. MIUI last-minute.

If none of these methods worked, try clearing the system launcher cache:

1. Go to Settings → Applications → Application Management.
2. Find the MIUI (or Launcher) system interface.
3. Press Warehouse. → Clear the cache.
4. Reboot the phone.

💡

After the update MIUI You lost the ability to edit the curtain, try changing the region in your phone settings to India - sometimes this returns hidden features.

6. Advanced features: button automation

For advanced users, Xiaomi offers automation tools that allow you to link quick access buttons to complex scenarios, such as:

• 🌙 Automatic night mode activation when pressing the switchboard Do not disturb.
• 🔋 Switching the energy saving profile when activating the aircraft mode.
• 📡 Automatic Wi-Fi connection when returning home (by geolocation).

To do this, you will need the application "Automation", which is in the standard set. MIUI:

1. Open the Settings. → Automation.
2. Click Create a rule.
3. Choose Trigger. → Quick settings and specify the desired button.
4. Set up Action (for example, enable Bluetooth or launch an application).
5. Keep the rule.

Example of a useful scenario:

⚠️ Attention! If you're setting up automation for the Mode in the Airplane button, make sure the rule says you turn on Wi-Fi after you turn off the plane mode, or the phone will be left without a network after you turn off this mode.

You can also use third-party apps like Tasker or MacroDroid to make your settings more flexible, such as:

• 📱 Create a button to simultaneously turn on Bluetooth and launch a music player.
• 🔋 Set up automatic shutdown of mobile data when connecting to home Wi-Fi.
• 📸 Run serial shooting in the camera with double pressing on the lamplight tumbler.

7. Differences in settings on different Xiaomi models

The functionality of the buttons of quick access may differ depending on the model of the smartphone and the version MIUI. Here are the key differences:

Nana POCO-devices with custom firmware (for example, POCO Launcher) may not have a curtain editor. In this case, try:

1. Install a standard launcher MIUI through settings → Topics.
2. Use third-party apps like Quick Settings Panel from Google Play.

On Xiaomi tablets (for example, Pad 6 or Pad 5), the quick access panel is adapted for the large screen: the buttons are larger, and the curtain displays advanced information (for example, the charge level of Xiaomi accessories over Bluetooth).

8 Security: Which buttons are best not to add to quick access

Despite the convenience, some switches in the quick access panel can compromise safety or speed up battery drain.

• 🔓 Password reset (if any) – an attacker can access the phone.
• 📡 Hot spot – if you don’t use it all the time, it’s best to turn it on manually (saves charge).
• 📍 Geolocation – Continuous Incorporation GPS discharge.
• 🔄 Synchronization – can lead to excessive traffic consumption.

Also avoid adding buttons for functions that:

• 🛑 Rarely used (e.g., in the case of, FM-radio or one-hand mode).
• ⚡ Active in the background (e.g. Permanent Bluetooth for smartwatches).
• 🔧 Can conflict with other settings (e.g., Power Mode and Performance).

⚠️ Attention! If you have added a button to the curtain, Developer Mode (for example, for debugging by USB), Make sure it's not active in public places.The attacker can connect to your phone via ADB steal data.

The best set of buttons for most users:

• 🔦 Lantern
• 📶 Wi-Fi / Mobile data
• 🔊 Silent mode
• 🔋 Energy saving regime
• 🎮 Game mode (if you play)

All other functions can be called through a search in the settings (swipe down the main screen and enter the request in the search bar).

FAQ: Frequent questions about setting up quick access buttons