Set up a new remote Xiaomi for TV: instructions with photos and tips

Xiaomi's new remote in hand, and the TV doesn't respond to commands? 90% In this case, the problem is solved by correct settings for 5-10 This article will help synchronize the remote with the Mi. TV, Redmi Smart TV We'll go through all the steps, from checking batteries to manually programming buttons, and also tell you what to do if the remote doesn't see the TV.

Xiaomi's remotes are versatile, with some models (e.g. Mi Remote Controller or Xiaomi). TV Master Remote only works with the brand’s TVs, others (like Mi Universal Remote) support up to 5,000 devices from different manufacturers, RF) And tips for fixing common bugs, and if your remote is equipped with voice control or a touchpad, there are nuances here, too, and we'll look at them separately.

1. Verification of the configuration and preparation of the remote

Before you set up the remote, make sure you have everything you need. In the box with the remote, Xiaomi should have:

• 🔋 Two batteries like this. AAA (sometimes CR2032 compact-model).
• 📄 Short instruction with QR-code (if not, the remote could be opened or repackaged).
• 🔄 Reset button (hidden under the battery compartment lid or on the back panel).

If you don't have any batteries, use a new alkaline (not rechargeable!) battery that's weak or dead is the most common reason why the remote doesn't sync.

• 🔍 Integrity of the infrared emitter (small window on the end of the remote control).
• 📶 The presence of a Bluetooth module in the TV (for remotes with wireless connection).
• 🔄 Pair or Sync button (usually located under the battery compartment cover).

⚠️ Attention: Xiaomi Mi remotes TV The Stick Remote and Mi Box Remote require pre-binding to the device via Bluetooth. Without this, they won’t work even with new batteries.

2. Determination of the type of connection: IR, Bluetooth or RF

Xiaomi remotes use three technologies for communication with the TV, the type of connection depends on the configuration process:

To determine the type of your remote:

1. Look at the infrared emitter, which is a little glass window, and if you don't have one, it's definitely not infrared.
2. Press the Home button + Volume Up for 5 seconds. If you flashed a blue LED, it's a Bluetooth model.
3. Check for the presence of the button RF or 2.4G on the body - a sign of a radio frequency remote.

If your TV doesn’t support Bluetooth (such as older Samsung models) LG Until 2018, the Bluetooth-controller Xiaomi will not be able to synchronize with it – you will need an IR adapter.

3. Synchronize Bluetooth remote with Xiaomi TV

For the Mi remotes TV Stick Remote, Mi Box Remote or Xiaomi TV Master Remote (touchbar) uses Bluetooth connectivity. anchoring algorithm:

Make sure the TV is on and in the settings menu|

Insert batteries into the remote (polarity indicated in the compartment)|

Press and hold the Home buttons + Back in 5 seconds|

Wait for the blue LED to flash on the remote

-->

Next:

1. On the TV, go to Settings → Devices → Bluetooth.
2. Select Add device or Connection.
3. In the list, find a device called Mi Remote or Xiaomi TV Remote.
4. Confirm the connection on the TV (entry may be required) PIN-code 0000 or 1234).

If the remote is not displayed in the list:

• 🔄 Restart the TV (pull the plug out of the socket for 30 seconds).
• 🔋 Replace your batteries with new ones (even if they seem to work).
• 📱 Check if the remote is connected to another device (e.g., Mi Box).

⚠️ Warning: After successful pairing, do not press the reset button on the remote (usually hidden under the battery compartment cover.

💡

If the TV can’t see the remote, try to hold it to a distance. 10-15 Sometimes a weak Bluetooth module does not catch a signal at a long distance.

4. Setup of Xiaomi’s universal IR remote

Xiaomi Mi Universal Remote or Redmi Remote supports up to 5,000 devices, including Samsung TVs, LG, Sony and others:

Step 1: Turn on the TV and point the remote to the IR receiver (usually located at the bottom of the screen).

Step 2. Press the buttons. OK + Volume + 3 seconds until the red LED flashes.

Step 3: Enter the code of your TV model (see code list below) After entering the Power button, turn off the TV.

Popular codes for brands:

If the code doesn't fit:

• 🔢 Try the following code from the list for your brand.
• 🔍 Use Auto Search: After Blinking the LED, Press Power Every 2 Seconds Until the TV Shuts Down.
• 📥 Update the remote firmware via the Mi Home app (if available).

5 Problem Solving: The remote does not work or is not working properly

If after setting up the remote:

• 🚫 Not at all responsive – check the polarity of the batteries and their charge.
• 🔄 Works in times – possibly interference from other IR devices (e.g. air conditioning).
• 🎛️ Not all functions are managed – the device code is not selected correctly.
• 🔋 Fast discharge - there may be a faulty capacitor in the remote (relevant for models over 3 years old).

Diagnosis of malfunctions:

To reset the remote to factory settings:

1. Remove the batteries.
2. Press and hold the Power button for 10 seconds.
3. Put the batteries back in.
4. Repeat the synchronization procedure.

⚠️ Warning: If the remote control stopped turning on the TV after reset and the codes are not helping, the IR transmitter may have been damaged. Check its performance with the smartphone camera: point the remote control at the camera and press any button. If the smartphone screen shows the blinking of violet light – the transmitter is serviceable.

6 Additional functions: voice control and gestures

Xiaomi remotes TV Master Remote and some Mi Remote Pro models support:

• 🎤 Voice control via Alice or Google Assistant.
• 👆 Gestures (e.g. swipe up/down to adjust volume).
• 🔍 Search for content by voice request.

To activate the voice assistant:

1. Hold the microphone button (🎤) remotely.
2. Wait for the sound signal (or the flashing of the LED).
3. Say a command, for example: Turn on the cartoon on TNT or increase the volume by 20%.

If the voice control is not working:

• 📶 Check the TV’s internet connection (required to handle requests).
• 🔊 Make sure that the TV settings include Voice Assistant (Settings) → Smart home. → Voice control).
• 🔄 Update the TV firmware to the latest version.

💡

Voice commands only work on TVs with an Amlogic or MediaTek processor (installed in most Xiaomi models after 2019).

7. Update of the remote firmware (if available)

Some remote models (for example, Xiaomi) TV Master Remote) supports firmware updates through the Mi Home app:

• 🔄 Hanging buttons.
• 📶 Unstable Bluetooth connection.
• 🔊 Lack of sound when pressing buttons.

Instructions for updating:

1. Install the Mi Home app on your smartphone.
2. Connect the remote to the TV (it should be turned on).
3. In the application, go to Profile → Settings → Update firmware.
4. Select your remote from the list and wait for the update to complete (don’t turn off the power!).

If the update is hanging:

• 🔋 Remove the batteries from the remote for 10 seconds.
• 🔄 Restart the TV.
• 📱 Reinstall the Mi Home app.

FAQ: Frequent questions about setting up Xiaomi remote