How to turn off ultra-energy saving mode on Xiaomi: the complete guide

Why ultra-saving mode can interfere with the smartphone

The ultra-Battery Saver mode on Xiaomi, Redmi and POCO smartphones is a lifeline for situations where battery life is running low. It turns off background processes, limits performance and blocks notifications to extend the device’s life before recharging. However, many users face the problem that once connected to charging or restored battery level, the mode does not automatically turn off, as a result, the smartphone runs slowly, applications do not update, and notifications come with a delay.

Even worse, when ultra-saving mode is stuck and does not respond to standard shutdowns, this can happen due to a MIUI failure, application conflict, or incorrect system updates, in which cases additional manipulation is required, from forced reboot to resetting, and in this article we will discuss all possible ways to disable the mode, including hidden functions and solutions for older models.

It’s important to understand that different MIUIs (12, 13, 14, HyperOS) and models (Xiaomi 12, Redmi Note 11, POCO X5) may have different paths to setup, and we’ve taken these nuances into account and prepared generic instructions that will suit most of the brand’s devices. If your model isn’t explicitly mentioned, focus on the firmware version.

Standard way to disable through settings

In most cases, ultra-saving mode is turned off via the battery menu, and here are the step-by-step instructions for MIUI 12-14 and HyperOS:

1. Open the Settings app (the gear icon on the home screen).
2. Go to Battery and Performance (on some models, just Battery).
3. Slip on the item Ultra saving mode (or charge saving → Ultra mode in HyperOS).
4. Switch the slider to the off position. or press Disconnect.

If the off button is inactive (shaded), this may mean:

• 🔋 Battery charge below 15% – the system blocks the shutdown to prevent a sudden shutdown.
• 📱 The device is overheated – in this case, first cool the smartphone.
• 🔄 There is a background update of the system - wait for its completion.

Connect the charger (if charge < 20%)|

Close all active applications |

Check the temperature of the body (it should not be hot)|

Make sure there are no active system updates-->

On some models (such as the POCO F3 or Redmi K40), the item may be called Super Savings or Extreme Savings. If you do not find the right section, search the settings (the magnifier icon in the upper right corner) and enter the "ultra savings" query.

Disconnecting through the notification panel (quick way)

The fastest way to deactivate the mode is to use the notification panel.

1. Swipe your finger down to open the notification curtain.
2. Find the Ultra Savings icon (usually looks like a lightning battery or an Ultra label).
3. Slap it once - the mode should turn off.

If the icon is not in the main panel, try:

• 📌 Turn the curtain completely (swipe twice or hold the first swipe).
• 🔍 Click on the pencil (Edit) and add Ultra saving tiles to the active.
• 🔄 Reboot your smartphone – sometimes the tile disappears due to a failure.

💡

If the notification panel doesn't respond to touch, try holding the power button for 10-15 seconds to force a reboot. This often helps unlock the hung functions.

On Xiaomi with HyperOS (such as Xiaomi 14 or Redmi Turbo 3), ultra-savings tile can be hidden in the “Advanced” section (the icon with three dots in the notification panel).

What to do if the ultra-saving mode does not turn off

If the standard methods didn't work, it could be a software failure, and here's the algorithm for forcing the shutdown.

1.Rebooting the smartphone

Hold the power button for 10 to 20 seconds until the device shuts down and starts to boot again. After you restart, check if the mode is off, and this method works in 70% of the cases of the function freeze.

2.Reset battery settings

Go to Settings → Battery → Battery Settings → Reset (or Restore Default Settings) This will remove individual saving settings, but will not affect personal data.

3. Disconnection via ADB (for advanced users)

If you have access to your computer, you can turn off the mode via the command line:

adb shell settings put global ultra_power_saving_mode 0

For this:

1. Enable USB debugging in the developer settings.
2. Connect your smartphone to your PC and execute the command above.

Warning: ADB use requires caution, and incorrect commands can disrupt the system.

4.Reset to factory settings

An extreme measure if other methods didn't work. Before reset, back up your data via Settings → About Phone → Backup. Then go to Settings → Additional → Restore and Reset → Reset.

💡

Resetting to factory settings deletes all data, including photos, contacts and apps, and only use this method if other options are exhausted.

Features of disconnection on older models (MIUI 10–11)

On Xiaomi smartphones with MIUI 10 or MIUI 11 firmware (e.g. Redmi Note 7, Mi 9), the battery settings interface is different. Here's how to turn off ultra mode on them:

1. Open the settings → Battery → Saving charge.
2. Choose Ultra Mode (or Extreme Savings).
3. Click Turn off at the bottom of the screen.

These firmware versions may not have fast tile in the notification curtain, and note that some older models (Redmi 5, Mi A1) have an ultra-saving mode called Survival Mode.

If after turning off the mode again activates spontaneously, check:

• 🔄 Automatic Rules in Settings → Battery → Battery settings → Automatic savings.
• 📉 Charge threshold at which savings are included (usually 5–15%).
• 🛠️ System updates (outdated firmware may contain bugs).

Until 2019|

2019–2021 |

2022-2023 |

2026 or later |

Table: Compatibility of disabling methods with MIUI versions

Frequent Mistakes and How to Avoid Them

Many users make common mistakes when trying to turn off ultra mode, and here are the most common ones and ways to prevent them:

⚠️ Attention: If after switching off the mode, the smartphone began to discharge quickly, check the background processes in Settings → Battery → Battery use. Maybe some app is consuming too much power.

Error 1: Attempt to turn off the mode when the battery is below 10%. MIUI blocks this action to avoid a sudden shutdown. Solution: plug the charger in and wait until the level reaches at least 15%.

Mistake 2: Using a non-original charger: Cheap cables or power supplies can cause a charge level failure, which prevents ultra-saving mode from being deactivated. Solution: Use an original or certified Xiaomi adapter.

Error 3: Ignoring system updates. There were bugs in older versions of MIUI that could have caused the mode to freeze. Solution: check for updates in Settings → About Phone → System Update.

Error 4: Forced shutdown of system processes through Task Manager, which can cause even more failure. Solution: Use only official shutdown methods (settings or ADB).

FAQ: Answers to Frequent Questions