How to use wireless charging on Xiaomi Mi 10: a complete guide with life hacks

Introduction: Why wireless charging on Xiaomi Mi 10 requires a special approach

The flagship Xiaomi Mi 10, released in 2020, was the first smartphone of the brand to support wireless charging standard Qi power up to 30 watts. However, many owners face problems: the phone does not charge, warms up or charging is too slow. The reason lies not in the defect of the device, but in the improper operation of the induction charging system, which is sensitive to the position of the smartphone, the type of charger and even the case.

Unlike wired solutions, where you just plug a cable into a connector, wireless technology requires that you take into account physical laws. For example, the distance between the transmission and reception coils should not exceed 5-8 mm, and the metal elements in the case can block the signal. In this article, we will discuss the step-by-step instructions for the Mi 10, compatible accessories, typical errors and hidden settings that will speed up the process.

Important: Xiaomi Mi 10 supports reverse wireless charging (up to 10 watts) for accessories like Mi Smart Band or headphones, but this mode is included separately, we will talk about this in the appropriate section.

What Chargers Are Right for Xiaomi Mi 10: Compatibility Table

Not all Qi charging is equally useful. Mi 10 requires devices with a power of at least 10 watts, otherwise the smartphone will charge in a “spare” mode (5 watts), as in cheap universal stations. Xiaomi’s official adapter – Mi Wireless Charging Pad 30W – is optimal, but alternatives from other brands will also work.

The main criterion: support for the Qi EPP (Extended Power Profile) protocol, without it, the maximum power will be limited to 7.5 watts. Below are the tested models with an indication of the real charging speed of the Mi 10:

⚠️ Note: If you use charging from an iPhone (such as MagSafe), the speed will not exceed 7.5 watts. To get 30 watts you need the original Xiaomi power supply 30W (complete with Mi 10 comes 33W, But he's a good one, too).

Step-by-step: how to turn on and configure wireless charging

You can control the process through the MIUI settings. By default, wireless charging is activated automatically when you place your smartphone on the station, but there are hidden options for optimization.

Follow the algorithm:

1. Check compatibility: Make sure the charger supports Qi EPP (see table above).
2. Remove the case: Even a thin silicone case can reduce power by 20 to 30 percent. Metal or magnetic cases block charging completely.
3. Charging position: Center your smartphone by the mark at the station (usually the brand logo). For the Mi 10, the optimal zone is the lower third of the body.
4. Activate Fast Charging: Go to Settings → Battery → Battery Settings. Enable Fast Wireless Charging (if disabled). Activate Smart Power Allocation to balance speed and heat.

Once connected, a lightning icon will appear on the lock screen that says Wireless Charging. If there is no indicator, check the connection or change the charger.

Reverse wireless charging: how to charge headphones and fitness bracelets

The Xiaomi Mi 10 is not only capable of receiving but also giving energy — this is called reverse wireless charging.

• 🔋 Maximum recoil power is 10 W, but the real speed rarely exceeds 5-7 W.
• 📉 Charging the Mi 10 discharges faster – about 1% per minute.
• 🔥 The function is turned off when the battery is heated above 40°C.

To activate reverse charging:

1. Open the Notification Panel and find the Reverse Charging tile (if not, add via Edit).
2. Place the accessory on the back panel of the Mi 10 (optimum zone is the upper part where the coil is located).
3. Wait for the vibration and the sound signal – charging has begun.

⚠️ Warning: Do not use reverse charging if the Mi 10 battery level is below 20%.This can cause the smartphone to crash due to lack of power for your own needs.

Typical problems and their solutions: from overheating to slow charging

If the Xiaomi Mi 10 doesn’t charge or does it too slowly, the reasons fall into three categories: hardware (charging or smartphone malfunction), software (MIUI settings) and external (cases, station position).

Problem 1: The phone is not charging at all

• 🔌 Check the power supply: connect the charger to another device (for example, an iPhone with support for Qi). If it does not work, the problem is in the station.
• 📱 Reboot Mi 10: Sometimes a glitch in the power controller blocks charging.
• 🔄 Update. MIUI: In older versions there were bugs with recognition of Qi-devices.

Problem 2: Charging is slow (less than 10 watts)

• 🔥 Check the temperature: when heating above 35°C MIUI It automatically reduces power.
• 🛡️ Remove the case: even the official case Xiaomi with a magnet can reduce speed.
• ⚡ Enable Quick Charging in the settings (see section above).

Problem 3: Charging is interrupted

• 🎯 Move the phone: the coils may have detached. Try to move the Mi 10 slightly at the station.
• 🔋 Check the power supply: if it gives less 9V/2A, charging will be unstable.
• 📵 Turn off Flight Mode: In rare cases, it interferes with the Qi controller.

💡

If the Mi 10 vibrates when you put it on charge, but it doesn't charge, try flipping the phone. The coil in the Mi 10 is closer to the top, and some stations require an "inverted" position for stable contact.

Hidden MIUI settings for optimizing charging

MIUI hides several options that affect the speed and safety of wireless charging, accessed through Settings → Special features → Battery Lab (in some versions, the path may be different).

Useful parameters:

• Adaptive Charging: Limits charge to 80% to extend battery life. Useful if you leave your phone charging overnight.
• Qi optimization: Includes additional coil calibration for a more stable connection.
• Temperature Control: Allows you to manually set the shutdown threshold when heated (default: 40°C).

To activate hidden functions:

1. Enter the combination ##4636### in the phone app.
2. Select Battery Information.
3. Click 5 times on Wireless charging status and the menu of advanced settings will open.

⚠️ Warning: Changes in temperature control may cause overheating. Do not set a threshold above 45°C is dangerous for the battery.

💡

Turning on the Qi Optimization option increases charging stability by 20 to 30 percent, but can slightly increase heating. Use it only with original chargers.

Safety: What not to do with wireless charging

Wireless charging Xiaomi Mi 10 is safe when used correctly, but there are actions that can damage the battery or even cause a fire.

• 🔥 Charge in direct sunlight: Co-exposure to heat from the sun and Qi charging can heat the battery to a critical 60°C.
• 💧 Use in a wet environment: Despite protection IP53, condensate on metal contacts of the charging station can cause short circuit.
• 📦 Cover your phone or charger: A blanket, bag, or even a book over the devices block the heat sink.
• ⚡ Connect to uncertified power supplies: Cheap adapters without power surge protection can knock out the charging controller.

Also avoid:

• Using metal objects (coins, keys) between the phone and charging creates a risk of induction heating of the metal.
• Charges near credit cards or hard drives – Qi’s magnetic field can damage data.
• Long-term charging (more than 8 hours in a row) - this reduces the battery life.

If you notice that the body of the Mi 10 has become hot (over 40°C), immediately remove it from the charge and let it cool.

FAQ: Answers to Frequent Questions