How to turn off fast charging on Xiaomi Redmi Note 10 Pro: 3 proven ways

Why do Redmi Note 10 Pro owners want to turn off fast charging?

Xiaomi Redmi Note 10 Pro supports fast charging up to 33 watts, which allows you to restore battery power from 0 to 100% in about 60-70 minutes. However, not all users are happy with this feature.

First, battery degradation: Lithium-ion batteries wear out faster with frequent fast charging cycles, especially if the phone is connected to the network constantly (for example, at night); Second, overheating of the device - when charged intensively, the Redmi Note 10 Pro can heat up to 40-45 ° C, which is unpleasant when used during recharging. Finally, some users note that slow charging (5-10 W) is more protective of the battery in the long run.

But should you turn off fast charging? There is no clear answer. Manufacturers (including Xiaomi) argue that modern power controllers minimize harm and the benefits of speed outweigh the risks. However, if you plan to use a smartphone longer than 2-3 years, it is wise to consider alternative modes.

Method 1: Disconnect via standard MIUI settings

The easiest and safest method is to use the built-in MIUI options. Xiaomi has added the ability to limit charging power in the latest firmware versions for the Redmi Note 10 Pro.

1. Open Settings → Battery and Performance.
2. Go to the Battery Settings section.
3. Find the Charging Limit (or Charging Mode depending on the MIUI version).
4. Choose Slow Charging or Normal Charging (10W).

If you don't have one, upgrade to the latest version of the firmware. In some regional versions of MIUI (for example, in India), the option may be called Battery Saver Charging.

Check out the MIUI version (Settings → About the phone)

Connect the charger (the option can only be active when connected)

Close the background applications (they may interfere with the application of settings)

Restart your phone after changes (recommended for stability)

-->

⚠️ Note: On some firmware, the charging restriction option only appears after the original Xiaomi charger is connected. If you use a third-party adapter, the system can block access to the settings.

Method 2: Use of an engineering menu (for power users)

If MIUI does not have the right option, you can try to turn off fast charging through the engineering menu, which requires caution, since improper actions can disrupt the device.

Instructions:

1. Open the Phone app and enter the combination: ##4636##.
2. In the menu that appears, select Battery Information.
3. Find the Fast Charge (or Quick Charge) string and tap it.
4. In the drop-down list, select Disable.

Then restart your phone. Importantly, the engineering menu may vary depending on the firmware version. If you don't have a Fast Charge, don't change the other settings, it can cause crashes.

Method 3: Third-party applications (alternative)

If the first two methods didn't work, you can use the apps from Google Play that control charging.

• 🔋 AccuBattery – analyzes the battery status and allows you to limit the charging current (root access is required for full functionality).
• ⚡ Battery Charge Limit – sets a charge limit (e.g. up to 80%), which indirectly reduces the speed.
• 📱 Quick Charge Toggle – switches charging modes (does not work on all devices).

Warning: Most of these applications require root rights or ADB-In addition, some programs may contain advertising or collect data. Before installing, check reviews and ratings.

💡

If you use AccuBattery, turn on the “Restrict Charging” option in the app settings and set the limit to 80-85%, which will reduce battery load without completely turning off fast charging.

⚠️ Note: Charging management applications may conflict with system processes MIUI. If after installation the phone starts to overheat or discharge quickly, delete the program and reset the battery settings (Settings) → Annexes → Application management → Three points. → Resetting battery settings).

What happens if you turn off fast charging: pros and cons

Before you make a decision, consider the implications.We've put together the key arguments for and against disabling fast charging on the Redmi Note 10 Pro:

Advantages:

• ✅ Extending battery life – Slow charging reduces heat and chemical stress.
• ✅ Less heating – the phone stays cool even with prolonged charging.
• ✅ Safety – the risk of battery bloating when using non-original chargers is reduced.

Disadvantages:

• ❌ Longer charging time – from 0 to 100% can take 3-4 hours instead of 1 hour.
• ❌ Discomfort in travel – fast charging is critical when you need to urgently recharge.
• ❌ Possible failures – when disconnected through an engineering menu or application, the system can behave unpredictably.

If you are often on the road or use your phone as a powerbank for other devices, avoiding fast charging can create discomfort.The optimal trade-off is to include slow charging only at night when the phone is not needed urgently.

💡

Disabling fast charging is advisable if you plan to use the Redmi Note 10 Pro for longer than 2-3 years. For short-term use (1-2 years), the difference in battery wear will be minimal.

How to check that fast charging is actually turned off?

After applying one of the methods, it's important to make sure that the changes are in effect.

1. Connect the phone to the charger.
2. Open Settings → Battery and Performance.
3. Look at the charging schedule: if the power is less than 10W, fast charging is turned off.
4. Use the Ampere app (available on Google Play) to measure the charging current, which is typically between 2,000 and 3,000 mA for fast charging, and 500 to 1,000 mA for slow charging.

If the numbers haven’t changed, try:

• 🔄 Reboot the phone.
• 🔌 Use another charger (possibly the current one does not support slow mode).
• 📱 Reset the battery settings (Settings) → Annexes → Application management → Three points. → Resetting battery settings).

Frequent Mistakes and How to Avoid Them

When you turn off fast charging, users often face problems. Consider typical situations and solutions:

1. The option "Restrict Charging" is not in the settings. Reason: outdated version of MIUI or regional restrictions. Solution: Update the firmware through Settings → About phone → System Update.
2. The phone doesn't charge after a change in the engineering menu, and the reason is: configuration failure. Solution: reset the battery settings or reset to factory settings (pre-backup!).
3. Quick charging is on its own. Reason: System reset or MIUI update. Solution: check the settings after each update.

If neither method worked, your Redmi Note 10 Pro may have hardware limitations, leaving you with two options:

• 🔧 Use a charger with less power (e.g. 5 W instead of 33 W).
• 🛠️ Contact Xiaomi Service Center for custom software firmware (risk of loss of warranty).

FAQ: Answers to popular questions