How to connect headphones Xiaomi with each other: instructions

The Chinese giant’s modern wireless headsets often come in two independent modules that require initial synchronization. Many users, when they first encounter a brand’s products, wonder how to pair left and right channels, a process that is not complicated but requires a clear sequence of actions, otherwise the devices will be perceived by the phone as two different sources of sound.

Depending on the model, whether it's the popular Mi True Wireless Earbuds or the more affordable Redmi Buds, the pairing algorithm may differ slightly. The main difficulty often lies not in connecting to the smartphone itself, but in creating an internal communication between the ears. If one of the channels is silent or the sound is only on one side, then the TWS (True Wireless Stereo) mode is not activated correctly.

In this guide, we will discuss in detail all possible scenarios for uniting devices into a single network, you will learn about standard activation methods, how to force reset settings and the nuances of working with different operating systems.

The principle of TWS technology in the Xiaomi ecosystem

True Wireless Stereo technology means that there are no physical wires between the headset and the source of the signal, but also between the headphones themselves. In Xiaomi, usually one module acts as a master, taking the signal from the smartphone and then broadcasting it to the slave channel, which is why the primary communication between them is critical.

Modern chips like Qualcomm or Realtek, used in flagship models like the Mi Air 2 Pro, can automatically identify a partner when extracted from a case. However, if devices have been paired with other gadgets or have a software failure, automation may not work, in which cases, the user's manual control is required to restart the data exchange protocol.

⚠️ Warning: If the lights on both headphones flash different colors or at different frequencies, this is a direct signal that they are not synchronized with each other.

Connection stability is directly dependent on the battery charge in the case and the modules themselves. Low energy levels can cause the communication channel between the right and left ear to break, even if the connection to the phone is formally activated. Always make sure that all contacts are charged before the pairing procedure.

Preparation of devices for primary pairing

Before you start the process of combining, you need to perform a number of preparatory steps, which will eliminate most errors associated with conflicting memory addresses or residual connections, the first step should always be a complete reset of the connection history on both modules.

Place both earbuds in the charge case and close the lid. Wait about 10 seconds for the devices to go into standby mode. Then open the lid, but don't remove the modules. Find the function button on the case case case case case (usually hidden or located on the end) and press it.

• 🔴 Hold the reset button. 10-15 seconds before the indicators light up in orange or white several times.
• 📱 Go to your smartphone’s Bluetooth settings and find the name of your headphones in the list of previously saved devices.
• 🗑️ Click on the gear icon or information next to the model name and select the option “Forget device” or “Cancel pairing».
• 📡 Turn off Bluetooth on your phone completely to clear the radio module cache.

Once these steps are done, the devices return to factory settings, are now clean and ready to make a new pair, and it is important to keep the deletion stage from the phone's memory, as old profiles can interfere with the installation of a new master channel.

Step-by-step: how to connect headphones Xiaomi with each other

There's a universal algorithm that works for most models, including Redmi AirDots and Mi True Wireless Earphones. The essence of the method is to force each module to find a partner at the same time. First, remove both headphones from the charging case.

So the important thing is to do this quickly so that they don't have time to go into deep sleep, and once you pick them up, the LED lights should start flashing, and then you need to press and hold the touch zones on both of these headphones simultaneously, and you need to hold them for about 5-7 seconds.

You'll notice that the pattern of blinking changes: one of the headphones (usually the right one) can blink slowly while waiting for the phone, and the other (the left one) has to blink quickly to find a pair, and when the connection is established, one of the indicators will go out, and the second one will continue to blink in standby mode, which means that the inner bridge is successfully built.

⚠️ During the procedure, keep your headphones close to each other, at a distance of no more. 5-10 If you take them too far away at the time of the search, the protocol TWS may not be activated.

Now you can turn on Bluetooth on your smartphone and start searching, and the list should show one device with the name of your model, if you see two identical names (for example, two "Mi True Wireless EBs"). Basic_R»), The synchronization is not complete and the procedure must be repeated.

Features of connecting models Redmi and Mi

Redmi and Mi often use different firmware versions, which makes their own adjustments. Budget AirDots models sometimes require longer retention of touch panels to enter mating mode. In some cases, you need to press the sensor 5 times quickly to activate reset or search mode.

For premium models such as the Mi Air 2 or Mi Air 2S, quick case-opening sync technology is often used (if the phone runs on Android with MIUI Pop-up support).

Below is a table that helps to identify the state of the device by the color of the indicator during pairing:

Note that color indications may vary depending on the firmware version. If the behavior of the indicators is very different from what is described in the manual, you may need to update the software through the Mi Wear app or Xiaomi Earbuds.

Problem Solving: When Headphones Can't See Each Other

It's not uncommon for left and right channels to refuse to work in pairs, and it's often because one of the modules is stuck in pairing mode, and the "slate clean" method helps, so remove the device from the phone's Bluetooth list, put the headphones in the case, close it, and wait a minute.

Then remove both headphones at the same time. If they do not connect automatically (one stopped blinking), try the following trick: touch the sensor on one headphone 2 times and on the other 3 times. Sometimes this combination force them to switch to search for each other, bypassing the standard algorithm.

Another common problem is different charge levels: if one earphone is discharged to zero, it may not turn on at all or immediately go into sleep mode, without having time to find a pair. Charge the case and modules completely using the original cable, as unstable voltage can block the operation of the communication controller.

💡

If nothing helps, try pairing your headphones with another smartphone to help you understand whether the problem is in the headset or in your main phone’s Bluetooth settings.

In rare cases, you need to flash your devices, download the official app for your model, connect at least one working channel, and check for updates. Sometimes manufacturers release patches that fix TWS sync errors.

Dual Audio mode: connecting two pairs of headphones to the same phone

Users often confuse connecting two headphones to each other (TWS) with connecting two separate pairs of headphones to the same phone. If your goal is to split the sound into two pairs to listen to music with a friend, you need a Dual Audio feature, or Translate Audio.

Xiaomi smartphones with MIUI 12 and later support this feature natively. First connect the first pair of headphones in the standard way. Then, without turning them off, put the second pair in pairing mode and find it in the Bluetooth list. The phone will suggest connecting the second device, keeping the first one active.

• 🎧 Connect the first headset and start playing music.
• 🔗 Transfer the second pair to visibility mode (press the case button).
• 📲 In the notification curtain or Bluetooth settings, select “Connect the second device».
• 🔊 Enjoy synchronized sound on four speakers.

It's worth noting that when you use Dual Audio mode, you can have a little bit of audio dissynchronization between two pairs of devices, which is a technical limitation of the Bluetooth protocol, not a headphone defect, and it may be less comfortable to watch video because of the delay.

💡

The key to success in syncing Xiaomi is to simultaneously reset the story on the phone and the right sequence of retrieving the headphones from the case.