Users of low-end electronics often encounter nuances that are not described in the compact manual. Redmi AirDots S is a popular model, but the process of their initial activation can be confusing. Many owners believe that it is enough to simply remove the devices from the case, but this does not always lead to the desired result.
Properly running the device ensures that the Bluetooth module is stable and that the smartphone is connected correctly. If you ignore the procedure, you may find yourself with only one earpiece running or the indicators flashing randomly. In this article, we will discuss all aspects of activation in detail.
Consider not only the standard algorithm, but also the methods of forced restart of the system, the key point is the simultaneous removal of both headphones from the charging case for synchronization, which will help to avoid many errors when you first get acquainted with the gadget.
Primary activation and preparation for work
Before trying to pair the Xiaomi Redmi AirDots S with a phone, make sure there's a charge.New devices often come with minimal battery power, which can prevent you from turning on.Put your headphones in your case and plug it into the power source for 15-20 minutes.
The activation process begins with the opening of the charger case cover. The indicators on the front should light up, signaling readiness. If the LEDs do not respond, check the integrity of the charging cable and make sure that the contacts on the headphones themselves are clean.
You have to take both devices out at the same time to start the system, and the synchronization between the left and right module is at that moment, and if you take them out in turn, they may not be able to see each other and they may not be able to pair.
- 🔋 Make sure that the case is at least 30% charged before first use.
- 👂 Remove both headphones at the same time, holding them by the legs.
- 👀 Watch the indicator: it should flash white, signaling the search mode.
☑️ Primary launch
It's important to understand that Bluetooth protocol takes time to initialize. Don't rush to search for the device in the phone settings right away. Give the gadget 5-10 seconds after extraction to complete internal checks and go live.
The process of pairing with a smartphone
Once activated successfully, the indicators will flash frequently, which means that detection mode is active, and you can now switch to mobile-side settings, and open the Bluetooth menu on your Android or iOS gadget.
The list of available devices should appear Redmi AirDots S. By clicking on it, you will start the procedure (pairing). PIN-a code that is usually equal to 0000.
⚠️ Warning: If two devices with the same name appear on the search list, don’t connect to either of them. This is a sign of desynchronization and you will need a full reset.
Successful connectivity will be confirmed by voice message "Connected" in the headphones and color change indicator, now the audio stream will be transmitted to both speakers, the quality of communication depends on the distance and the presence of obstacles between the phone and the headset.
It is worth noting that the device remembers the phone’s mac address when it first connects, and the connection will occur automatically when the case is opened if Bluetooth is on the smartphone.
Solving problems with turning on the left earphone
Frequent problems of budget owners TWS-The left earpiece may not be on or transmitting sound, and this is often due to a failure of synchronization protocol.
To fix the situation, you need to put both devices back in the case, make sure they sit tight in the seats and the magnets pull them in, and the indicators should catch fire, confirming contact with the charging pins.
If the problem recurs after extraction, a reset procedure will be required.Clutch the touchpads on both headphones simultaneously and hold for about 20 seconds.Indicators should blink several times, signaling a hard reset.
| Symptoms. | Possible cause | Method of decision |
|---|---|---|
| The indicator doesn't burn | Battery discharged | Charging 30 minutes. |
| Works alone. | Razsynchronization | Reset settings (Reset) |
| No sound. | Wrong profile. | Reconnection to Bluetooth |
Why are settings being reset?
Once reset, you need to re-remove the device from the Bluetooth list on the phone and re-pair the pairing procedure, which eliminates 90% of the software errors associated with the transmission of the audio signal.
Indication and control of touch panels
Understanding color indication helps to quickly diagnose the condition of Redmi AirDots S. Red burns while charging and fades when fully charged. White flashing means search mode or waiting for connection.
Control is done through sensory areas located on the headphone leg, a light touch can pause the track, and a double touch can trigger the voice assistant, and a triple tap often switches tracks or causes a last action.
To change the volume sometimes requires long-term sensor retention, although in the base firmware this function may not be active. Touch control requires confident but not too strong touches to avoid moving the device in the ear.
💡
To extend the life of the sensor, wipe the touch area with a dry cloth. Fat and moisture can reduce the senses!
Voice prompts in English indicate battery status and connection. The phrase "Power off" means that the device is turned off or discharged. Ignoring these signals can lead to a deep discharge of the battery.
Technical features and specifications
The AirDots S model is based on the Realtek chipset, which provides a stable connection according to the Bluetooth 5.0 standard. This generation of the protocol allows you to save energy and maintain a connection at a distance of up to 10 meters without loss of quality.
Inside the case is a 300 mAh lithium polymer battery that provides multiple cycles of full charge of the headphones. The headphones themselves have 40 mAh batteries, which gives about 4 hours of continuous music playback.
The IPX4 moisture protection allows the device to be used during sports training or in light rain, but immersion in water is strictly prohibited and will lead to irreversible damage to the electronics.
- 📡 Bluetooth 5.0 for stable communication.
- 🔋 Operating time: up to 4 hours from one charge.
- 💧 Protection: IPX4 (spray-proof).
💡
The stability of the work depends on the quality of charging: use undamaged cables and power supplies with a current of no more than 1A.
The SBC codec provides basic sound quality sufficient for podcasts and pop music. For audiophiles accustomed to aptX or LDAC codecs, the sound may seem simple, but for its price tag, it remains competitive.
Frequent questions and troubleshooting
Users often wonder if one earphone can be used independently of the other.Redmi AirDots S supports mono mode, but activating it often requires the sequence of actions described in the manual.
Another common issue is laptop compatibility: Because the device uses the standard protocol, it works seamlessly with Windows and macOS if the computer has a Bluetooth adapter. Drivers are usually installed automatically.
⚠️ Note: When connecting to a PC, make sure that the audio settings as the output device are selected headphones, not built-in speakers.
If the sound is interrupted or there is a crack, try to move away from sources of interference, such as Wi-Fi routers or microwave ovens. Frequency overlap can cause temporary connection breaks.