Xiaomi Redmi smartphones are famous for their excellent value for money, but sometimes users are faced with a situation where the standard volume speaker is not enough. This can occur in noisy places, on the street or if the device is in the bag. The problem of quiet calling is especially relevant for older people or those who are often in high noise. Fortunately, the Android operating system and the shell MIUI or HyperOS provide many tools for fine-tuning the audio stream.
In this article, we will explore not only the basic settings, but also the hidden features of the system that allow you to squeeze the maximum out of the speaker. You will learn how to activate hidden functions, use third-party software and even look into the engineering menu for professional audio calibration. It is important to understand that excessive volume increase software methods can lead to distortion of the sound or damage to the speaker, so you should approach advanced settings with caution.
We’ll look at the techniques that are relevant for both old and new Redmi models. Some settings may be called differently depending on the firmware version, but the logic of their work remains the same throughout the Xiaomi ecosystem. If you want to be sure that you don’t miss an important call, this guide will be an indispensable tool for you in setting up a personal audio profile.
Basic sound settings in the system
The first thing to start diagnosing and setting is the standard Android settings menu. Often users accidentally lower the ringtone volume to a minimum or activate the Do Not Disturb mode, thinking the phone is faulty. To check, go to Settings → Sound and Vibration. Here you will see sliders for different types of sounds: multimedia, alarm, notifications and, in fact, the call.
Make sure the Call slider is maxed out. Some versions of the MIUI have a separate setting, "Increase the volume of the call in your pocket," which uses a proximity sensor to determine the position of the phone and automatically raises the volume if the device is in your bag, a critical option for those who often carry the smartphone in their outerwear pockets or tight bags.
⚠️ Warning: If the sound is still quiet after you spin the slider to the maximum, check whether Quiet or No Sound mode is on in the notification curtain. Also make sure that Bluetooth headphones are not connected to the phone that can intercept the audio stream.
In addition, the audio menu should pay attention to the choice of melody. Some tracks are originally recorded at low volume or have a compressed dynamic range. Replacing the system ringtone with a louder and sharper track can solve the problem without deep system settings.
- 🔊 Check to make sure the call volume slider is at maximum in the settings menu.
- 📵 Make sure the “Revenge Volume in your pocket” mode is activated».
- 🎵 Replace the ringing melody with a high initial volume track.
- 🔇 Turn off Do Not Disturb mode and check Bluetooth status.
⚠️ Warning: When choosing a melody, avoid tracks with sharp volume drops, as at maximum volume this can cause speaker wheezing.
Remember, the physical volume buttons on the phone's body regulate exactly the setting that was active when you pressed it. If you pressed the button when the screen was off, you adjust the volume of the call. If the screen was on and you were watching the video, the media, always check which slider you were moving.
Advanced settings in the "Security" application
A unique feature of Xiaomi smartphones is the availability of the system application “Security” (Security), which contains many hidden optimization tools. This is often where the keys to solving problems with sound that are not visible in the standard menu. Open the application and find the section “Enhanced sound” or “Audio effects”.
Inside this section, you can find equalizers and different sound scripts. Try switching the profile to Loud or manually lifting all the sliders of the equalizer up. Graphic equalizer allows you to amplify the frequencies that normally record human voices and call signals, which makes the sound more legible and penetrating even at the same physical volume of the speaker.
💡
Use the preset Rock or Pop in the equalizer if there is no Loud mode. These usually have raised mid and high frequencies, making the call more audible.
Also in the Security app, it's worth checking the Memory Cleanup section and running optimization. Sometimes background processes can get stuck with audio drivers, causing the sound to play incorrectly. Rebooting audio services through the optimizer often returns the normal volume.
- 🛡️ Open the Security app on the home screen.
- 🎚️ Find the “Sound Improvement” section and activate the maximum profile.
- 📈 Lift the equalizer sliders, especially in the 1kHz – 4kHz range.
- 🧹 Run the Cleanup function to reboot system sound services.
It's worth noting that in newer versions of HyperOS, some audio features can be migrated to general audio settings, but the Security app remains a central hub for system improvements.If you don't find the right options, make sure the app is updated to the latest version via GetApps.
Use of the Engineering Menu for Calibration
For advanced users who want to gain full control of the hardware part of the sound, there is an engineering menu, a hidden part of the system designed for testing equipment by engineers in the factory, which is logged in through a set of special code in the "ringer" type code ##6484## or #3646633## (code may vary depending on the processor: MediaTek or Snapdragon).
Once you log in to the menu (usually called Hardware Testing or CIT), you need to find the audio-related section. Look for the Audio, Audio Debug or Speech tabs. Here you can customize Gain levels for different scenarios: loudspeak, ear talk, media playback speaker. We're interested in the ringtone setting (often referred to as Ring or Speaker).
Is it dangerous to change the settings in the engineering menu?
In the Audio menu, select Common or Ringtone mode. You will see a level scale (Level 0, Level 1, etc.) Increase the value by 10-20 units can significantly add volume. However, do not twist the values to a maximum of (255), as this is guaranteed to lead to distortion.
- 📞 Enter the engineering code in the phone app.
- 🔧 Go to the Hardware Testing section → Audio.
- 📢 Select Ringtone or Speaker mode.
- 🔝 Smoothly increase Gain values by testing the sound after each change.
⚠️ Warning: The engineering menu is a powerful tool. Don't change settings you're not sure about, especially those related to frequencies and modulation.
After making changes, be sure to press Set or Save to allow settings to apply. In some cases, you may need to restart the device. If the sound is hoarse, immediately return the values to the original ones.
Third-party applications for sound amplification
If built-in tools aren't enough, Google Play apps come to the rescue. There are many software utilities that amplify the audio signal bypassing system constraints, and the leaders in this niche are apps like Volume Booster GOODEV, Super Volume Booster or Precise Volume.
The principle of their work is to create an additional layer of amplification on top of the system mixer, and once you install this application, you will need to start it, give the necessary permissions and use the slider to increase the volume by 20%, 40% or even 60%, but using such boosters has its own risks and features.
The main risk is overheating of the speaker and the appearance of distortion (wheezing). Digital gain does not add physical power, it simply causes the speaker to oscillate with a greater amplitude, which can lead to mechanical damage with prolonged use at maximum.
- 📲 Download the Proven Booster App from Google Play.
- ⚙️ Launch the application and grant rights to change system settings.
- 🔊 Increase the volume with small steps (increase the volume). 10-15%).
- 🛑 Do not keep the booster on permanently, activate only when necessary.
It is recommended to use such applications situationally, for example, when you are at a very noisy party or at a construction site and waiting for an important call.
The influence of accessories and covers on sound
Often, the problem of quiet calls is not software, but physical obstacles. Xiaomi Redmi smartphones today have multiple microphones and speakers, whose holes are located in different parts of the case. The wrong case can block the output of sound or create a “jamming effect”.
Silicone cases with high sidebars or a thick bottom often shift the position of the phone when vibrating, causing the speaker to press against the surface of the table or fabric, which makes the sound deaf and quiet. Remove the case and check the volume of the call without it. If the sound is much better, the problem is in the accessory.
💡
A tight case can cover up to 30% of the sound stream, making the call barely audible in noisy environments.
It's also worth checking the security tapes. Some users, in an attempt to protect the phone completely, even tape the speaker area. This is absolutely not allowed, because the film extinguishes the air fluctuations. Make sure that all the process holes are free.
| Accessory type | Impact on sound | Recommendation |
|---|---|---|
| Silicone case | Medium (may jam) | Check for matching holes |
| Leather flip | High (closes the speaker) | Use with caution |
| Protective glass | Low (if the speaker is not closed) | Control the sticker |
| bumper | Low. | Safe for sound |
Notice the location of the main speaker. Most Redmi models have it at the bottom. If you put the speaker down on a soft surface (sofa, blanket), the sound will be absorbed by the fabric. Try to put the phone up with the speaker or use a stand.
Removing hardware problems and cleaning
Over time, the speaker grid gets clogged with dust, pocket pile and skin fat. It's a natural process that reduces volume significantly. Even if the mesh appears clear visually, microscopic particles can create a cork. Careful cleaning can return the device to factory volume.
To clean, use a soft toothbrush or a dry brush for drawing. You can slightly moisten the brush with isopropyl alcohol, but be extremely careful not to let the liquid get inside the case. With light sweeping movements, clean the speaker area. It is also effective to use sticky tape (scotch) to pull dust from the holes.
☑️ Cleaning the dynamics
If the cleaning and software settings didn't work, maybe the speaker went out of order or the plume went away, which is often the case after a fall, and you'll need to disassemble the device and check the speaker plume's contact with the motherboard, and if the contact is normal, but the sound is quiet and hoarse even on the new settings, you'll need to change the speaker.
- 🧹 Regularly clean the speaker grid from dust and pile.
- 💧 Use the minimum amount of alcohol to degrease the mesh.
- 🔌 Check the density of the speaker plume fit (if you have skills).
- 🔊 Compare the volume with another device of the same model for diagnosis.
In some cases, a quiet sound can be caused by moisture, and if the phone gets wet, even a little, the oxidation of the contacts of the speaker will inevitably lead to a deterioration in the sound quality, in which case professional cleaning in the service center is necessary.