Modern wireless headsets from the Chinese electronics giant have gained popularity due to the excellent price-performance ratio. However, owners often face a situation where devices stop working in pairs and sound is played in only one ear or there is no stereo effect. Synchronization of headphones Xiaomi Basic is a process that requires accurate execution of the sequence of actions so that the left and right channels work again as a unit. In this article, we will discuss all the nuances of restoring communication between modules.
The problem of desynchronization can occur after connecting to a new smartphone, discharging the battery to zero or software failure in the phone's operating system.It is important to understand that Xiaomi Basic, like many other models, is not a problem. TWS-The headset uses a data protocol that requires initial pairing before connecting to the sound source, and if this step is missed or broken, the device will behave incorrectly. We will look at the solutions that are relevant for most models of the line of Redmi and Mi.
To start with, make sure that the problem is software failure, not a physical break in the speaker or a dead battery. Often users panic ahead of time, although it is enough to simply reboot modules. Reconciling the pairing takes only a couple of minutes, if you know the correct sequence of taps on the touchpads or mechanical buttons. Let's take a look at the preparatory stage, without which further action may be useless.
Preparation of the headset and smartphone for pairing
Before any manipulation of Bluetooth settings, you need to ensure a stable power base of the device. If the charge in the case or the headphones themselves is critically low, the synchronization process can be interrupted halfway, which will lead to even more errors in the operation of the modules. Put Xiaomi Basic in the charging case and leave them for at least 15-20 minutes, even if the indicators indicate the presence of charge, this will allow you to level out the voltage in the batteries of the left and right ear.
The next step is to clean up the list of paired devices on your mobile phone. The smartphone may try to connect to an old, "memorized" profile, ignoring attempts to re-pair between the headphones themselves. Go to Bluetooth settings, find your headphones in the list, and select the "Forget the device" or "Delete" option. After that, turn off the Bluetooth on the phone completely to reset the cache of connections.
⚠️ Note: Do not try to turn on the headphones while they are inside the charging case, unless the instructions for your model do not provide for activation when the lid is closed. In most cases, you need to remove them to enter the pairing mode.
It is also recommended to check for system updates on your smartphone. Sometimes conflicts between Bluetooth drivers in the Android or iOS operating system interfere with the correct operation of peripherals. Make sure you have geolocation enabled, since in modern versions of Android it is a mandatory requirement to find Bluetooth devices. Only after these preparatory steps can you move to direct synchronization.
💡
Before the procedure, be sure to wipe the contacts on the headphones and inside the case with a dry cloth - oxidation can interfere with full charging and proper start of the device.
Basic method of synchronization through automatic connection
The easiest way to get Xiaomi Basic to work in stereo is to rely on a regular automatic mating algorithm. Manufacturers are using a logic where removing both headphones from the case simultaneously forces them to look for each other. If they were previously successfully synchronized, then after extraction, the indicators should blink in blue (or otherwise, depending on the model), signaling the search for the phone.
To start the process, remove both headphones from the case almost simultaneously. Don't hold them in the case too long after opening the lid, as some models go into sleep mode. You should see that the LED lights on both devices have started flashing. At this point, the internal synchronization of the channels occurs: one earpiece (usually the right one) becomes a master device and the second subordinate. Wait until the blinking becomes more rare or the color of the display changes.
Once the indicators are in standby mode, turn on Bluetooth on your smartphone and start searching for new devices. The list of available should show the name of your model, for example, Redmi Buds Basic or Mi True Wireless Earbuds Basic. Click on the name to connect. If the sound appeared in both ears, the procedure was successful. If the phone sees two identical devices (for example, two “L” or two “R”), then the synchronization between the headphones did not occur, and you will need a manual reset.
Importantly, in some versions of firmware, the master device can be any headphone that gets the first one. If you constantly take out only your left ear, it can try to work in mono mode, ignoring the right one. Try to take both devices out at the same time or the right one first if you want it to take over the connection control, which is especially true for older versions of Bluetooth protocol.
Forced reset (Hard Reset) to restore the pair
If the automatic method did not help and the headphones still can not see each other, you need to perform a forced reset to the factory settings.This procedure completely clears the internal memory of Bluetooth modules, removing all previous (pairing). For Xiaomi Basic models without physical buttons on the body (control only the touch), the process looks specific and requires accuracy.
First, make sure that the headphones are not connected to either device and the Bluetooth on the phone is turned off. Then you need to turn off the headphones themselves. To do this, press the touch zones on both headphones simultaneously and hold for about 5-7 seconds until the indicators go out (or turn red, signaling a turn off). After turning off, again press the touch panels and hold them for about 20-30 seconds. You need to wait for the moment when the indicators flash several times (usually 2-3 times red or white), which signals a reset.
- 🔴 Put the headphones in the case and close the lid for 10 seconds.
- 🔴 Remove both earphones at the same time.
- 🔴 Hold the sensory areas on 20-30 second-on.
- 🔴 Put the devices back in the case, close and re-extract for a new pairing.
Once you reset, put the headphones back in the charge case and close the lid. Let them lie there for 5-10 seconds so they can "realize" their presence in the database. Then retrieve both devices again. Now they must go into fast pairing. Turn on Bluetooth on your phone and find the device again. Hard reset helps in 90% of software conflicts.
☑️ Checklist for resetting settings
Features of synchronization of models with mechanical buttons
Some Basic modifications, as well as more advanced versions, can be equipped with physical control buttons instead of touch panels. The principle of operation here is similar, but the tactile recoil allows you to better control the process. The mechanical button eliminates false positives from sweat or moisture, which makes the reset procedure more predictable.
In these models, it often takes a long press (about 15-20 seconds) to enter pairing mode. Unlike touch versions, it is harder to make mistakes with retention time. If you successfully enter reset mode, you will hear a characteristic beep in your headphones or see a rapid flash of the indicator. Mechanical buttons require a stronger press, so make sure you press clearly and before clicking.
If you have a model with a button on your case (as some versions of AirDots do), the process may be different. In such cases, the button on the case itself is responsible for putting the headphones in visibility mode. Press the button on the case for 3-5 seconds until the indicator on the case case case flashes white, which will put both earphones in search mode, ignoring previous settings.
| Type of management | Action for discharge | Indication of success | Retention time |
|---|---|---|---|
| Touch (Touch) | Double-push and hold | Blinking red 2-3 times | 20-30 seconds |
| Mechanical button | Single long press | Sound signal + flashing | 15-20 seconds |
| The button on the case | Pressing with open headphones | White flashing of case indicator | 3-5 seconds |
Remember that after reset on the models with mechanics, it may be necessary to re-pair with the phone, even if they were already on the list.Remove the old profile, as described in the first section, to avoid conflicts of MAC addresses. Properly performing these steps ensures that the left and right channel will again merge into a single acoustic system.
Solving problems with one-way sound
When you've been manipulating the sound in one ear, you need to pay attention, and it can be not only a synchronization problem, but also a balance setting in the smartphone itself. Check the settings for special features on Android or iOS. Sometimes the balance slider shifts to the extreme position, and the user thinks that the earphone is broken.
If the balance is normal, try retraining your headphones, just plug one headphone (like the right one) into your phone, play the music, make sure the sound is there. Then, without turning off the music, put the working earphone in your case, and leave the second one outside. After 5 seconds, pull out the first earphone. Sometimes this shake-up forces the data protocol to rewire the audio stream routing.
⚠️ Attention: If none of the methods work, and one earphone is silent even in mono mode, there may be a problem in the hardware (speaker or plume.
Also worth checking is the Mi Wear or Xiaomi Earbuds app (if your model is supported). Through the official software, you can check the charge of each headphone separately and, in some cases, update their internal firmware. The firmware update often contains connection errors that cannot be fixed by a simple reset.
Why do the headphones discharge at different speeds?
Prevention and proper operation TWS-headset
To avoid the problem of "how to synchronize Xiaomi basic headphones with each other" in the future, it is important to follow the rules of operation. TWS-Degraded batteries are a deep discharge. Don't keep your headphones in a case empty for months. Lithium polymer batteries degrade if the voltage drops below a critical level, which makes it impossible to turn on and synchronize.
Clean the contacts regularly. On metal charge areas and deep in the case, earwax and dust accumulate, which can create micro-circuits or, conversely, prevent charging. Use a dry cotton swab to clean. The cleanliness of the contacts ensures that when placed in the case, the headphones will be correctly turned off and charged, which prevents many logical errors.
- 🔋 Do not allow full discharge to zero during storage.
- 🔋 Avoid extreme temperatures (do not leave in the sun or in the cold).
- 🔋 Periodically (once a month) fully discharge and charge the device to calibrate the controller.
Use an original or quality cable to charge your case. Cheap cables can deliver unstable voltages that knock out the power controller inside the Xiaomi Basic. Steady power is the foundation of a stable Bluetooth module. Following these simple rules will prolong the life of your headphones and keep your stereo sound for months to come.
💡
Regularly cleaning the charging contacts and avoiding full discharge prevents 80% of headphone desynchronization problems.