How to make a growing call on Xiaomi Redmi Note 5: a complete guide with settings MIUI

Xiaomi Redmi Note 5 is still one of the most popular budget smartphones due to reliable hardware and flexible firmware MIUI. But even this time-tested device has hidden features that many users don't know about, one of which is a mounting bell that gradually increases volume during an incoming call. Not only is it convenient (you won’t miss a call if the phone is in another room), but it’s also practical: a sharp sound at full volume won’t scare you in the middle of the night.

In this article, we will discuss all the ways to configure a rising call on the Redmi Note 5 – from standard tools. MIUI You'll find out how to use third-party apps:

• 🔊 Enable the incremental call through system settings (works on the MIUI 9–14).
• 🎵 Select a melody with a smooth increase in volume from the standard or download your own.
• 📱 Set up different call profiles for individual contacts (e.g. quiet for family, growing for work).
• ⚙️ Fix typical problems when a function is not working (e.g. after an update) MIUI).

Important: on the Redmi Note 5 (the whyred model), the incremental call is implemented at the firmware level, so its setting is different from newer Xiaomi devices (for example, the Redmi Note 10 or the Redmi Note 10). POCO X3). If you have a different model, check the compatibility at the end of the article.

What is a scaling call and why do you need it?

A surge call (or smooth volume increase) is a function where the volume of an incoming call starts at a minimum level and gradually increases to a maximum within a few seconds.

• 🕒 First 2 seconds: volume 20% (barely audible).
• 🕒 Next 3 seconds: Volume 50% (hears well in a quiet room).
• 🕒 After 5 seconds: Volume 100% (maximum).

Advantages of this approach:

1. No sharp noises: You won’t jump from a sudden loud call if the phone was lying nearby.
2. Charge savings: The speaker is not running at full power all the time.
3. Office convenience: colleagues won’t turn on the first signal if it’s quiet.
4. Safety: Smooth build-up reduces the risk of damage to the speaker when the volume is changed.

On the Redmi Note 5, this feature is implemented at the level of the MIUI, But it's disabled by default, and in fact, in some versions of the firmware (especially after updates), it has to be manually enabled through hidden settings.

⚠️ Note: If you use custom firmware (like LineageOS or Pixel Experience), the mounting call may work differently or not at all.

Method 1: Enable via standard MIUI settings

The easiest way is to use built-in tools. MIUI. It is suitable for most Redmi Note 5 users on the official firmware (MIUI 9-14 Follow the instructions:

1. Open the Settings app (the gear icon on the desktop).
2. Go to the section Sound and vibration.
3. Select Call (or Call Melody in some versions) MIUI).
4. Slip on the Additional settings (or in the upper right corner).
5. Find the option to increase the call (or Smooth volume increase) and activate the switch.

If there is no such thing, then your version MIUI It hides this setting. In this case, try an alternative path:

Settings → Special features → Sound → Increasing call

After activation, check the function:

• 📞 Ask a friend to call you or use a second phone.
• 🔈 Make sure the volume starts to rise with a quiet sound.
• ⏱️ Time: Standard buildup takes 5-7 seconds.

Is the option activated in the settings?

The trial call starts quietly?

Is the volume increasing smoothly?

No sudden surges of sound?

-->

If the function does not work, move on to the next method.

Method 2: Configure with Engineering Mode (Engineering Menu)

On some versions MIUI (Especially after updates, the surge call is hidden in the engineering menu, which requires caution, but gives access to advanced sound parameters.

Instructions:

1. Open the Phone app.
2. Enter the combination: ##3646633## (for Redmi Note 5 with Snapdragon 636).
3. You will be taken to Engineering Mode. Go to Hardware Testing → Audio.
4. Select Normal Mode (or Headset Mode if you want to set up your headphones).
5. Find the Ring Volume Ramp Up option and set the Enabled value.
6. Save the settings and restart the phone.

⚠️ Warning: Do not change other settings in Engineering Mode unless you are sure of their purpose.Incorrect settings can lead to loss of sound or damage to the speaker.

If the #3646633## combination doesn’t work, try the alternative codes for Xiaomi:

• #4636## (general test menu)
• ##6484## (test of hardware)

Once activated, check the call. If the sound is still not building up, there may be a problem with the firmware, in which case resetting will help (see Troubleshooting section).

Method 3: Using third-party applications

If standard methods don’t work, you can use third-party apps from Google Play, which offer more options for customizing your call, including:

• 🎚️ Castomization of the rate of increase (for example, 3 seconds instead of 5 seconds).
• 🔄 Different profiles for personal and work contacts.
• 🎶 Own melodies with an increasing effect.

The best apps for Redmi Note 5:

How to set up Volume Ramp Ringer (Step-by-step):

1. Install the application and open it.
2. Press Enable Ramp (Allow notifications to be accessed).
3. In the Ramp Duration section, select the build-up time (recommended 5 sec).
4. In Ringtone, select a tune (you can download your own).
5. Activate the Override System Ringtone option.

⚠️ Warning: Some applications require permission to access notifications, without which they will not be able to intercept incoming calls. → Annexes → Permits → Access to notifications.

If the call does not increase after installing the application:

• 🔄 Reboot the phone.
• 🛠️ Check if the application is blocked by the battery optimizer (in the settings) MIUI Turn off restrictions for the application).
• 📥 Update the application to the latest version.

Set up a growing call for individual contacts

One of the key advantages MIUI — The ability to assign customized tunes and call profiles to different contacts, which is useful if you want to:

• 👨‍👩‍👧‍👦 For the family: a quiet call without a build-up.
• 💼 To work: increasing the call with maximum volume.
• 🚨 For important contacts: a special melody with rapid growth.

How to set up:

1. Open the Contacts app.
2. Select the right contact and tap Edit.
3. Click on the ringtone (or the notification sound).
4. Choose a tune marked "Increasing" (if there are none, download yours through Volume Ramp Ringer).
5. Save the changes.

If there are no options with an increase in standard tunes, create your own:

• 🎵 Use the Ringtone Maker app (see table above).
• 📈 In the editor, select the option Fade In (smooth appearance of sound).
• 💾 Save the file in format.mp3 or.m4r.
• 📲 Assign her contact through Settings → Sound. → The ringing melody.

On the Redmi Note 5 with MIUI 12+ customized contact call settings may be reset after the firmware update. To avoid this, export contacts to the file before updating. VCF (through settings → System system → Backup).

Troubleshooting: Why the mounting call is not working

If you have turned on the feature but the call still starts at maximum volume, check the following points:

If nothing helps, reset the sound settings:

1. Go to Settings → System → Resetting settings.
2. Select Resetting Sound Settings (not to be confused with a full reset!).
3. After rebooting, reset the incremental call.

If the problem persists, it may be due to a hardware malfunction (e.g., a damaged speaker), in which case, contact Xiaomi’s service center.

Comparison with other Xiaomi models

The function of the incremental call is on most Xiaomi smartphones, but its implementation differs depending on the model and version. MIUI. For comparison:

If you have a different Xiaomi model, check for the feature in the audio settings. on new devices (like the Redmi Note 12 or the Redmi Note 12). POCO F5) The incremental call is enabled by default and does not require additional settings.

💡

On the Redmi Note 5, the incremental call is often hidden in Engineering Mode or requires third-party apps, whereas on newer Xiaomi models it is enabled by default.

FAQ: Answers to Frequent Questions

💡

If you miss calls often because of a quiet sound, try the combination: a mounting call. + To do this, activate Vibration when calling in the sound settings and select Reinforced Mode.