How to reset settings on Xiaomi wireless headphones: the complete guide

Xiaomi’s modern wireless headphones and sub-brands like Redmi and Haylou have become an integral part of the daily lives of millions of users. They are compact, have great sound and hold a charge for a long time, but even the most advanced electronics sometimes fail. When the headset stops seeing the phone, the sound becomes quiet or intermittent, and the indicators behave unpredictably, a complete reset procedure comes to the aid, which returns the device to factory parameters, eliminating software errors and pairing conflicts.

Many gadget owners are afraid of the word "reset" because they think it's a complex technical manipulation that requires the intervention of specialists. In fact, in 99% of cases, you can perform this procedure yourself in a few minutes without any special tools at hand. Resetting is a standard feature that the manufacturer has put in place to diagnose and restore the accessory, and understanding how to properly initiate this process for your particular model will save you time and nerves.

In this article, we will discuss in detail the algorithms of actions for different lines of wireless acoustics Xiaomi. TWS-True Wireless Stereo, neck headsets and gaming headphones will learn how to interpret the flashing of indicators correctly, what to do if standard methods do not work, and how to avoid common mistakes when steaming devices after cleaning memory.

Diagnosis: when you need a complete reset of the headset

Before we take any drastic measures, we need to make sure that the problem really requires a reset. Often users try to “cure” hardware malfunctions with software methods that do not work. Reset is effective when the logic of the headphone software or their communication with external devices is broken.

⚠️ Note: If the headphones are physically damaged (the body is broken, the contacts are oxidized, the battery is damaged), a software reset will not help and may even aggravate the situation if the process requires active electronics.

The main signs that your Xiaomi device needs to clean the memory of pairing lists are:

• 🔌 Headphones are turned on, but the phone does not see them in the list of available Bluetooth devices, although before everything worked properly.
• 🎵 The sound is played only in one headphone, or the channels are confused, and the balance is broken without the possibility of software correction.
• 🔋 The charge indicator burns incorrectly, for example, shows full charge, but the device turns off after 5 minutes.
• 📱 The headset spontaneously disconnects or loses connection to the sound source at a distance of less than one meter.

If you're experiencing one of these symptoms, you're probably running a memory buffer with old connections or a firmware failure, and factory resets are the only effective way to bring the device back to life without flashing it, and you shouldn't ignore these signals, because prolonged incorrect work can lead to more serious synchronization errors.

Preparation for the procedure: important nuances

The success of a recovery operation depends on proper preparation. Chaotic button presses without understanding the current state of the device can lead to you entering pairing mode instead of resetting or vice versa. It is important to be clear about the difference between off and reset mode.

The first and most important rule is the battery level. Make sure there is enough power in the case and in the headphones themselves. If the device turns off due to discharge during the reset process, which can last from 5 to 30 seconds, this can lead to software "bricking" or a controller freeze.

You also need to perform preparatory actions on the side of the smartphone:

• 📱 Go to your phone’s Bluetooth settings and find your Xiaomi headphones in the list of devices.
• 🗑️ Click on Forget Device or Break the pairing to remove the old connection profile.
• 📡 Temporarily disable the Bluetooth module on your phone so it doesn’t try to automatically reconnect during the reset procedure.

Some models, especially the Xiaomi Game Earbuds series, may require a dedicated application for full control. However, the reset itself is most often done hardwarely, without the help of software. Make sure you know exactly the model of your device, as the algorithms for AirDots and, for example, Mi True Wireless Earphones 2 may differ.

💡

Before starting the reset, wipe the contact pads on the headphones and inside the case with a dry lilaless wipe. The oxidation of the contacts can prevent the correct reading of the charge status and interfere with the discharge command.

Universal discharge method for TWS-model

Most modern fully wireless headphones Xiaomi use a similar reset algorithm, tied to touch control or physical buttons on the case case, this method is suitable for such series as Redmi AirDots, Mi True Wireless Earbuds Basic and their modifications.

The classic way to do this is to place both earbuds in the charge case and leave the lid open. The headphones or the front of the case should light up, signaling the start of charging. If the indicators don't respond, move the headphones slightly to make contact.

Next, you need to find the reset button, and depending on the model, it can be located:

• 🔘 On the outside of the charging case (often hidden in the recess).
• 👆 On the inside of the case cover between the seats.
• 🎧 On the sensory areas of the headphones themselves (requires simultaneous pressing).

If your device has a physical button on the case, press it on 10-15 The indicator should start flashing white or red (depending on the model), and then turn off or change the blinking rhythm. This is a signal that the pairing memory is cleared. If there is no button on the case, the technique becomes more complicated: you need to simultaneously touch the sensory areas of both headphones while they are in the case, and hold your finger near 20 seconds.

Reset specifics for Redmi AirDots and Mi Basic models

Redmi AirDots (also known as Mi True Wireless Earbuds Basic) is one of the most popular but also the most capricious in terms of left-right-channel synchronization. It often happens that headphones "disconnect" and work as two independent mono-device, for which there is a unique two-step reset method.

Step one is to reset each earpiece separately. Remove both earbuds from the case. Turn them off (hold the sensor 5 seconds before turning it off). Then press and hold the touchpad on each earbud for 20 seconds. The indicator should flash red several times. This will clear the internal memory of each module.

The second step is TWS pairing, and after the memory is cleared,

1. Put both headphones back in the case, then pull them out at the same time.
2. Wait until the indicators on both headphones blink quickly (search mode).
3. Press and hold the sensors on both headphones at the same time for about 5-7 seconds until they turn off.
4. Put them in the case and get them out again, and now they have to find each other, and one of the indicators goes out, and the other one flashes slowly.

⚠️ Attention: When performing a reset on AirDots models, it is critical to keep your fingers strictly on the touch areas.Shifting your finger can cause the voice assistant to be accidentally activated instead of being reset.

This procedure may seem like dancing with a diamond, but it is she who allows you to restore the TWS-If the headphones still don't sync with each other after all the manipulations, the problem may be in the hardware of one of the channels.

Resetting neck headsets and overhead headphones Xiaomi

Neckheads like Mi Neckband Bluetooth Earphones or Redmi Neckband Earphones Pro, as well as overhead models like Mi Headphones Comfort, have more traditional controls. Sensors are rare here, and the focus is on physical control buttons.

To reset these devices, a key combination is usually used. Most often, you need to simultaneously press the power button and the volume button (or multifunction button), hold them for a long time - about 10-15 seconds, until the indicator lights up red or changes the pattern of blinking.

The table below shows common combinations for different types of Xiaomi devices:

Once enabled, you will have to re-configure your audio profile to your preferences through the Mi Home app or Xiaomi Earbuds.

What to do if reset did not help: advanced diagnosis

There are times when even following the instructions doesn't work. Xiaomi's headphones continue to behave incorrectly. In this case, you shouldn't immediately carry them to the service. There are a number of additional steps that can help identify the true cause of the malfunction.

First, check if the problem is a feature of your smartphone. Some Android shells (especially older versions of MIUI or third-party launchers) may conflict with Bluetooth headphone protocols. Try connecting the headset to another phone or laptop. If everything works perfectly there, then the reset was not necessary - you had to clean the Bluetooth cache on the phone.

Second, look at the Mi Home app or headphone software, and sometimes you can get a firmware update, and firmware updates often fix bugs that you can't fix with a simple setup reset, and if the headphone is plugged in but it's not working well, try updating it.

⚠️ Warning: Do not interrupt the process of updating the firmware! If the earphone is discharged or loses communication during data recording, it will be possible to restore it only through a special programmer in the service center.

It's also worth checking the charging contacts. If one of the headphones (usually the right one, which is a master device) doesn't charge to 100%, it may not go into pairing mode correctly. Dirt, pile or oxidation on the contacts is a common cause of "glitches" that users mistake for a software failure.

Frequently Asked Questions (FAQ)

💡

Main conclusion: If a standard reset failed within two attempts, there is a high probability of hardware malfunction of the battery or Bluetooth module, which requires contacting the service.