How to turn up the volume on Xiaomi wireless headphones

The situation when the loved ones TWS-Xiaomi headphones play too quietly, familiar to many owners. Even at the maximum mark of the slider in the smartphone, the sound can seem muffled, especially in a noisy subway or on the street. Often the problem lies in the software limitations of the operating system or incorrect synchronization of volume levels between devices.

There are several proven ways to significantly improve audio output: Android’s engineering menu, third-party equalizers, and proper Bluetooth protocol setup allow you to squeeze the maximum out of the headset. It’s important to understand that over-amplifying the signal can lead to distortion or damage to hearing, so you need to act carefully.

In this article, we will explore all the available methods, from basic connection verification to advanced manipulation of system files, you will learn how to bypass the software limits set by manufacturers and return your sound to its former power and purity.

Basic verification of connections and pairings

Before you go into deep system settings, you need to eliminate trivial synchronization problems. It often happens that the smartphone and headphones work in different volume modes. For example, the overall sound level in the phone is at its maximum, and the internal volume of the headset itself has remained low, this is a frequent problem when switching between different play sources.

Make sure that the Bluetooth settings activate the A2DP (Advanced Audio Distribution Profile) profile, which is responsible for transmitting high-quality stereo sound. If the profile switched to HFP (Hands-Free Profile), the sound quality will drop sharply and the volume will be minimal, since this mode is only for phone conversations.

Try resetting the pairing list on your headphones. For Xiaomi Redmi Buds or Mi True Wireless models, this is usually done by long-term clamping of the touch zones or button on the case. After reset, remove the device from the Bluetooth list on your phone and pair again, ensuring that the devices exchange current volume parameters.

⚠️ Warning: If the sound is louder after reconnecting, but there is cracking or wheezing at high frequencies, then you are faced with a limitation of the power of the smartphone amplifier. Further increase in volume by software methods can overload the dynamic head.

It’s also worth checking if the smartphone has “Absolute Volume” activated, and in some MIUI and HyperOS shells, it may not work properly, blocking independent level management, and disabling this option sometimes unlocks a hidden decibel reserve.

Multimedia settings in Android and MIUI

Android splits the volume into several independent channels: call, alarm, notifications and multimedia. Often users raise the overall level without noticing that the slider of media content is left in the middle. In the Xiaomi interface, a separate scale is responsible for this, which must be twisted separately when playing music or video.

Owners of MIUI-enclosed smartphones should pay attention to the sound settings in the Sound and Vibration menu, which often hides additional options like "Mi Sound Enhancer" or "Dirac Audio Tuner," which allow them to not only add decibels, but also adjust the frequency response to make the sound clearer and perceived as louder.

To access the advanced settings, go to Settings → Sound and Vibration → Sound Quality. Here you can choose a profile that matches your headphone model or adjust the equalizer manually. Raising sliders at medium and high frequencies (2kHz – 4kHz) subjectively increases volume, since the human ear is more sensitive to this range.

💡

Use the "Sound Improvement" feature only when the headphones are connected. Applying system improvements to a phone speaker with a Bluetooth device connected can cause driver conflict and sound loss.

Remember that some apps, like YouTube or Spotify, have their own internal volume controls. Check the settings inside the app itself to make sure there is no traffic restriction or saving mode that also reduces the quality and level of audio streaming.

Using an engineering menu to amplify sound

The most powerful tool for advanced users is the Android Engineering Menu, which allows you to interact directly with the drivers of the audio codec. To get there, type in the code ##6484## in your phone (for example, the code is not available). CIT-Xiaomi menus) or use third-party apps like MTK Engineering Mode for MediaTek processors.

In the engineering menu, you're interested in the audio section. The path may vary depending on the Android version, but it often looks like Hardware Testing → Audio → Audio Debugging. Here you'll see a list of modes: Normal Mode (normal), Headset Mode (headphones) and Handfree Mode (loud communication).

Choose Media (or Music) type of sound, and you'll see multiple sliders that correspond to different volume levels (Level 0-10), which is where you force up the values for each step of the regulator, and be careful: setting too high values can lead to clipping.

⚠️ Warning: Changes in the engineering menu are not reset when you restart, but can be reset when you update your firmware. Write down the baseline values before making changes so you can go back.

After making changes, be sure to press the Set or Apply button, otherwise the settings will not take effect. Check the result immediately by turning on the track. If the sound is hoarse, reduce the Digital Gain values. This method works on most devices, but requires accuracy.

Application of third-party equalizers and amplifiers

If built-in tools are not enough, third-party applications come to the rescue, with Volume Booster GOODEV being the leader in this field. This app creates a virtual layer on top of the system sound, allowing you to exceed the standard limit of 100%, it is simple, free and works efficiently on most Xiaomi models.

More advanced users should look to Poweramp Equalizer or Bass Booster, which not only amplifies the signal, but also fine-tunes the frequencies. For example, a small rise in low frequencies (60 Hz) and upper frequencies (10 kHz) creates the illusion of louder and richer sound without risking damage to the speaker membrane.

For users who are ready for complex setup, there is an app called Wavelet, which uses auto-correction technology to analyze the frequency response of specific headphone models. TWS-models, which allows you to level the sound and raise its level professionally.

• 📈 Volume Booster: Simple amplification of the overall signal, suitable for rapid correction.
• 🎚️ Equalizer FX: Flexible frequency band adjustment to improve legibility.
• 🎧 Wavelet: Automatic calibration for a specific headphone model.

When using amplifiers, it's important to monitor the heating of your smartphone. Real-time audio processing software loads the processor. If you notice that the battery is going down faster than usual or the phone is warming, lower the gain or close the background applications.

The problem of dissynchronizing the volume of Bluetooth

One of the most annoying problems in the Android ecosystem is the out-of-sync volume levels, and the bottom line is that the phone thinks volume is at maximum and the headphones are at 50%, which is often the case if you've connected the headset to another device or listened to music at low volume before you turn it off.

There's an algorithm to address this problem. First, turn off Bluetooth completely on your smartphone. Then put your headphones in your case and close it. In 10 seconds, turn on Bluetooth on your phone, but don't connect to your headphones. Go to Bluetooth settings, find your headphones in the "Conjugated Devices" list, and hit "Forget the device" or "Cancel pairing."

Now do the pairing again. When you're connected, when the music isn't playing, try to keep the system volume of the phone to a minimum, then smoothly add it to a maximum, and this action causes the Bluetooth protocol to re-negotiate the handshake signal to agree on the maximum level between the source and the receiver.

In some cases, it helps to turn on the developer mode. You need to click on the build number 7 times in the About section. Then, in the Developer menu, find the Disable Absolute Volume option.

Cleaning speakers and headset maintenance

Often the reason for the quiet sound is trivial — pollution of the speaker grid. Earwax, dust and pile from the pocket over time tightly clog the cells of the protective mesh Xiaomi Earbuds. This physically blocks the output of the sound wave, reducing the volume by 30-50%.

To clean, use a soft toothbrush or a special sticky clay to clean the appliances. Carefully brush the net to remove plaque. You can use a cotton swab slightly soaked in isopropyl alcohol, but make sure that the liquid does not get inside the case. The alcohol quickly evaporates and degreases the net, restoring patency.

Also check the condition of ear liners (ambushes). If they are made of silicone, over time the material may become cloudy and less elastic, less fitting to the ear. Replacing the liners with new or with analogues of memory foam can significantly improve noise insulation and subjective volume.

💡

Regularly cleaning the speaker grid is the easiest and safest way to return the original volume to the headphones without the risk of software failures.

FAQ: Frequently Asked Questions