How to raise the volume in headphones Xiaomi Airdots: expert guide

Wireless headsets often face a situation where standard sound levels are not enough to comfortably listen to music or watch videos in a noisy place, especially for the budget models of the Redmi Airdots, Airdots 2 and Essential series, where hardware limitations of speakers can affect the final acoustic picture. However, before you put up with a quiet sound, it is worth checking the software settings and making sure that the devices are paired correctly.

There are many software and hardware methods to make the most of your TWS-It doesn't always require third-party software or firmware, and most of the time, the problem is either de-synchronizing the volume channels of the smartphone and the headset, or settings specific to the operating system. Let’s break down effective sound amplification techniques that will help you enjoy your favorite tracks at full power.

It's worth noting that excessive volume can distort the sound or, in rare cases, damage the speaker membranes. So maximum software amplification on Android (absolute volume) can reduce the overall life of the speaker system. Use these techniques wisely, alternating them with listening to the standard settings to preserve the sound quality.

Checking basic settings and pairing

The first thing to do is to eliminate the banal connection errors, because the volume dissynchronization between the phone and the headphones is the most common cause of quiet sound. There are two volume control channels in Bluetooth protocol: one on the source device (smartphone), the other on the receiving device (earphones). If they work independently, spinning the slider on the phone may not work if the sound level on the headphones themselves remains low.

To fix this, try the following action algorithm. First, turn off Bluetooth completely on your smartphone. Then place both earbuds in the charging case and close the lid for 5-10 seconds. Then open the case, but don't remove the headphones, and turn on Bluetooth again on your phone. Do pairing again. This reboot of modules often equalizes the signal levels.

It's also worth checking if Absolute Volume is activated in hidden Android settings, if that option is available in your firmware version, which allows you to control volume only from your phone, ignoring the physical buttons on the headset, which for some users is key to solving the problem.

• 🔊 Make sure that the media volume slider (not a call!) is twisted to the maximum on the smartphone itself.
• 🎧 Press the volume button on the headphone case several times in a row until you hear a confirming signal or voice alert.
• 📱 Check if another Bluetooth device (such as a smartwatch) is connected to the phone that can intercept audio control.

If simple manipulations don't work, the problem can go deeper, in some cases, a "deaf" reset of the headset helps, to do this, press the touch pads on both headphones simultaneously for 20-30 seconds (until the indicators flash red several times), after reset, you will have to re-conduct the pairing procedure by removing the device from the list of previously connected ones.

Sound settings in the Android system

Android provides users with a wide range of options for fine-tuning audio, but many of them are hidden in the menu for developers. This is where the switch can dramatically change the situation with the volume of your Xiaomi Airdots. To get into this menu, you need to click on the build number several times in the section “About phone”, after which the option “Developers” will appear in additional settings.

Inside the developer menu, find an option called Disable Absolute Volume. If this switch is activated, the system controls the volume of the phone and headphones independently. Try changing the state of this switch: if it was turned on, turn it off, and vice versa. After each change, you need to completely reboot the smartphone and reconnect the headset.

Also, you should pay attention to the equalizer and sound effects built into the MIUI or HyperOS shell. Often, activating audio virtualization or changing the equalizer profile to Rock or Pop can add decibels, albeit at the expense of sound purity. Don't neglect the standard Dolby Atmos settings, if available on your device.

It is important to understand that different versions of Android behave differently. On older versions (Android 9 and below), problems with desynchronization were more common. On modern Android 12/13/14, the system better manages codecs, but conflicts with third-party memory cleaning applications can reset the audio settings.

Use of booster applications

When the system is not enough, specialized applications, known as volume boosters, come to the rescue, and these programs work by amplifying a digital signal before it is sent to a Bluetooth adapter. One of the most popular and proven solutions is the Volume Booster GOODEV application or analogues like Super Volume.

The way these utilities work is simple: they create a virtual layer on top of a standard volume control, allowing you to exceed the standard limit of 100%. However, there is a major risk. Excessive amplification of the digital signal leads to wheezing, distortion and can physically overload miniature speakers in Airdots.

⚠️ Note: Do not set the booster booster above 20-30%. Exceeding this threshold is guaranteed to lead to unpleasant distortions and can damage the membranes of the speakers irreversibly.

When using third-party software, you should also consider resource consumption. Background work of such applications can slightly increase the battery consumption of a smartphone, although this practically does not affect the autonomy of the headphones themselves. It is recommended to use boosters only when the standard volume is really not enough, for example, in noisy transport.

Specifics of settings for iOS (iPhone)

Apple users often complain of quiet sound when connecting non-original headphones, since iOS has strict limits on hearing safety.The system automatically reduces the maximum volume for devices that have not passed the MFi (Made for iPhone) certification, which formally includes Xiaomi Airdots.

To get around this limitation, you need to go to your iPhone settings, select "Sounds, tactile signals" and find "Hearphone Safety" where you can turn off the "Loud Sound Reduce" feature, which will remove the program limit, but require confirmation of the health warning.

There's also a hidden calibration trick in iOS. If the sound is quieter after an iOS update or a setting reset, try this: plug in your headphones, turn the volume down on your iPhone to zero, then turn off Bluetooth without removing the headphones from your ears. Then turn on Bluetooth again and plug in the headset, and then smoothly turn up the volume. Sometimes this forces the system to recalibrate output levels.

• 🍏 Check if the “In your pocket” mode is enabled in the special features settings, which can mute the sound.
• 🔇 Make sure your Health settings do not set a hard decibel limit for the Europe region.
• 🎵 Try to enable the equalizer in the music settings and select Late Night or Louder preset (if available through third-party players).

Remember, audio processing algorithms are a priority in iOS, and even with limiters disabled, the system can dynamically compress the range when playing certain frequencies to protect the user's hearing, a feature of the architecture that is difficult to get around without jailbreaking.

Physical Causes of Lower Volume

It's not always software that's the problem. Physical factors can have a big impact on the passing ability of sound. TWS-earbuds are very small and quickly clogged with earwax and dust. Even a thin, almost invisible layer of plaque can turn the volume down on the headphones. 30-40%.

To clean, use a soft toothbrush or cotton swab slightly soaked in alcohol (do not let fluid get inside!). Carefully walk along the speaker grid. You will be surprised how much dirt can accumulate there in a few months of use. Also check the silicone embushures: if they are too tight or, conversely, do not fit in size, the sound pressure inside the ear will be insufficient.

Another physical aspect is battery power: When the charge level is low (less than 15%), many Xiaomi Airdots models automatically go into power saving mode, which can limit the power of the amplifier. Full charging of the case and headphones often returns to the previous volume.

💡

Use blue sticky mass (cleaning gel) for electronics to safely remove dust from hard-to-reach areas of the speaker grid without damaging it.

Resetting and flashing headphones

If software and cleaning methods don't work, the radical but effective way is to reset completely. 2 The procedure usually looks like this: place the headphones in the case, open the lid and press the touch zones on both headphones on the headphones. 20-30 Indicators should flash red (sometimes) 5 (a) which signals a resetting of the settings.

After reset, remove the device from the Bluetooth list on the phone ("Forget the device") and pair it again. Important: first connect the left and right headphones together (usually they flash quickly when looking for each other), and only then connect them to the phone. Disruption of connection order often leads to the headphones in mono mode or quiet sound.

In rare cases, it may be necessary to flash it, but for low-end Xiaomi models it is a complex and risky process that requires special software (for example, for the first time, DFU-For most users, it is easier and safer to perform a quality reset than trying to refashion the headphone microcontroller, risking turning them into a brick".

⚠️ Warning: When performing a reset, make sure that the case and headphones are charged at least 50%. Interrupting the reset process due to battery discharge can lead to improper operation of the firmware.

In conclusion, raising the volume in Xiaomi Airdots is a 90% problem. Start by cleaning the grids and checking the absolute volume settings in Android. If that doesn't work, use boosters with caution. Remember that sound quality is more important than extreme volume, and careful acoustics will prolong the life of your favorite gadgets.

💡

An integrated approach (cleaning + settings + correct reset) solves the problem of quiet sound more effectively than using third-party amplifiers.

Frequently Asked Questions (FAQ)