How to connect Xiaomi True Wireless Earphones 2 headphones

Modern. TWS-Xiaomi’s headphones have proven to be an affordable and high-quality solution for listening to music and conversation. True Wireless Earphones 2 (often labeled as a “True Wireless Earphones” model) MI TW Earbuds Basic 2 is especially popular due to its reliable connection and long battery life. However, the process of initial setup and pairing with a new device sometimes raises questions among users, especially if they are first encountering the ecosystem of the Chinese brand.

In this detailed guide, we will take a look at all the steps of connecting a headset to Android and iOS smartphones, and pay attention to the important nuances of activating the pairing mode. The right sequence of actions will avoid common errors, such as desynchronizing the left and right earphone or the inability to detect the device, you will learn how to reset to factory settings if standard methods do not work, and how to optimize the operation of accessories.

It's important to understand that Bluetooth protocols require care when you first get to know a gadget. Despite the automation of many processes, manual control at the initial stage guarantees the stability of the connection in the future. We'll look not only at the standard procedure, but also at the specific scenarios that can occur when using different operating systems.

Preparation of headphones for the first turn on

Before you look for a device in your phone settings, make sure the headset is ready to go. Unlike wired accessories, Xiaomi True Wireless Earphones 2 requires removing protective films from charging contacts. On the inside of each headphone, at the bottom of the leg or bowl, there are metal contacts that are often closed with a blue or transparent sticker.

Carefully remove these films using tweezers or a thin object, trying not to damage the speaker grid. Then place the headphones in a charging case. The indicators on the ends should light up red, signaling the start of charging. If there is no glow, check if the magnets and contacts fit tightly.

⚠️ Warning: If the lights don't light up immediately after the film is removed, that's fine. 10-15 minutes, as the factory battery charge may be minimal or completely absent.

To activate the pairing mode, both earbuds must be removed from the case simultaneously, at which point they will automatically go into the Pairing Mode, as evidenced by the rapidly flashing white indicator on one of the headphones (usually on the right), the left earbud at this point should flash slower or synchronously, waiting for a connection to the smartphone.

Matching with Android devices

The Android operating system provides the deepest integration with Xiaomi devices. The connection process is standard for most smartphones, whether Mi, Redmi, Poco or devices from other manufacturers such as Samsung or Sony.

Follow the following steps to establish the connection:

• 📱 Unlock the smartphone screen and lower the “curtain” of notifications.
• ⚙️ Press and hold the Bluetooth icon or go to the Settings menu → Bluetooth.
• 🔍 Make sure the Bluetooth slider is active and the phone starts searching for available devices.
• 🎧 In the list of "Available devices" find the entry MI TW Earbuds Basic 2 or Xiaomi Earbuds Basic 2.
• ✅ Click on the model name to initiate pairing.

After a successful connection, you will hear a characteristic beep in the headphones, and the smartphone’s status bar will display a headset battery icon. A2DP profile will provide high-quality stereo sound transmission, and HFP will allow you to use the microphone for calls.

Sometimes the system may request confirmation of an access code. 99% of the time, for Xiaomi devices, it's code 0000 or 1234, although modern versions of Android often bypass this step automatically. If the phone sees the device but writes "Connection error," try removing old headphone entries from the list of previously used devices.

Connection settings for iOS (iPhone/iPad)

Owners of Apple appliances can also comfortably use Xiaomi True Wireless Earphones 2, although some features, such as a battery-charged pop-up window, may not be available without third-party apps.The Bluetooth protocol is universal, so the basic connection is hassle-free.

Algorithm for iOS users:

• 🍏 Open the settings on your iPhone or iPad.
• 📡 Go to the Bluetooth section and switch on the switch.
• 👂 Remove the headphones from the case and wait for the indicator to blink.
• 📲 Find the list of devices MI TW Earbuds Basic 2.
• 🔗 Click on the name and confirm the pairing if a request appears.

Note that on iOS, headphone charge levels may not be displayed correctly or at all in the Battery widget. This is an operating system limitation, not a headset defect. For details on the percentage of charge of each headphone and case, it is recommended to install the Mi Buds M8 app or similar from the App Store.

⚠️ Note: On iPhone, when you connect new accessories, you sometimes need to confirm the action by pressing a button on the Connect screen. Don't ignore system requests, otherwise the process will end in a timeout.

Once connected, the sound will automatically switch to the headphones. If this does not happen, click on the AirPlay icon in Control Point or in the Music app and select MI TW Earbuds Basic 2 as the output device.

Solving problems with headphone desynchronization

One of the frequent problems TWS-Headset is a situation where the phone sees two devices with the same name or the sound comes from only one headphone.This means that the left and right channels have lost communication with each other and work independently.

To re-synchronize the headphones with each other, perform the following procedure:

• ❌ Go to your phone’s Bluetooth settings and click “Forget the device” or “Cancel pairing” for both headphone records.
• 📴 Turn off Bluetooth on your smartphone completely.
• 🖐️ Touch the touch area of both headphones at the same time 5 times quickly to turn them off (if they are burning), or just put them in a case.
• 🔄 Press 5 times on each earphone’s touchpad to reset settings (earbuds should flash red several times).
• 🔗 Remove them from the case and wait until they hire each other (indicators will blink slowly).

If the headphones don't connect to each other after the reset, maybe one of them is discharged more than the other. Put them in a case for 30 minutes to level the charge. Also, the problem may be contamination of the contacts, so wipe them with dry cloth.

Table of indicators and their values

Understanding the Xiaomi True Wireless Earphones 2 color indication is critical to diagnosing the device’s condition, with different blinking modes informing the user of the current battery status, charging process, or pairing mode.

Note that when you take it out of the case, the light light goes off for a couple of seconds and goes off to save energy. This is normal behavior, not a sign of malfunction. The LED module only activates when you change status or when you charge.

Management and additional functions

Once successfully connected, you get access to touch control. Xiaomi True Wireless Earphones 2 supports basic commands that do not require additional software installation. Touch panel is located on the outside of the headphone leg.

Major management teams:

• 🎵 One touch: Playback/pause (or answer to a call).
• 📞 Double touch: Repeat the last number (on some firmware) or activate the voice assistant.
• 🛑 Triple touch: Often used to call a voice assistant (Google Assistant / Siri).
• 📴 Retention (2 seconds): Deflecting an incoming call or turning off headphones.

💡

To activate the voice assistant, make sure it is configured in the smartphone system. On Android, Google Assistant is called by default, on iOS, Siri is called by default.

Some users note that double-touching can adjust tracks, but the Basic 2 model often only implements a pause and call assistant.

Frequent Questions and Answers (FAQ)

💡

The stability of the connection Xiaomi True Wireless Earphones 2 directly depends on the purity of contacts in the case and the absence of conflicts Bluetooth channels with other devices nearby.

Compliance with these simple rules and instructions will allow you to enjoy high-quality sound without technical problems. Digital signal processing in conjunction with the right connection will ensure comfortable use of the headset in all conditions.