Modern wireless headsets require minimal user intervention to get started, but the initial setup often raises questions among owners of new devices. Xiaomi AirDots Pro 2 (also known as Mi True Wireless Earphones 2 Basic) is no exception and have their own features of synchronization with gadgets. Proper execution of the sequence of actions ensures stable connection and activation of all noise reduction functions.
The connection process depends on your smartphone’s operating system, whether it’s Android or iOS, and the desired use case – working with a single device or automatically switching between several gadgets. In this article, we will take a detailed look at all available pairing methods, look at the operation of a branded application and eliminate typical errors that can occur when you first start.
It is worth noting that the stability of Bluetooth connection directly affects the quality of audio stream and microphones. Bluetooth 5.0, used in this model, provides a reliable data channel, but requires the correct initial configuration. Ignoring the basic rules of pairing can lead to desynchronization of the left and right earphones or increased battery consumption.
Primary activation and entry into the pairing mode
Before you look for a device on the list of available, you need to make sure that the headphones are ready for detection.Pairing mode is a state in which the headset becomes visible to external devices. For Xiaomi AirDots Pro 2, this procedure is standardized, but has its own nuances, depending on the state of the case charge.
Remove both earphones from the charger case. The inside lights should be on, signaling to turn on. If you do this for the first time after purchase, the devices will automatically go into standby mode. However, if the headphones have been previously used, you will need to force the entry into detection mode.
Place both headphones back in the case, leaving the lid open. There's a function button on the front of the charger case. Press and hold it for 2-3 seconds. The light indicator on the front will often flash white, which is a signal that the mode is activated.
⚠️ Warning: If the case indicator flashes red, the battery is critically low. Connect the case to the power source before setting up, otherwise the process may interrupt.
It is important to distinguish between flashing indicators: rare flashing means normal operation or waiting, and frequent white flashing means readiness to connect. Xiaomi AirDots Pro 2 uses a fast synchronization protocol, so the window to connect is open for a limited time.
💡
Make sure that the protective films on the contacts of the new headphones are removed, otherwise they will not be charged in the case and will not enter the pairing mode.
Connection to Android-based smartphones
Android offers the widest range of wireless peripheral management options available. For Xiaomi, Redmi and POCO smartphone owners, the process is simplified by integrating with MIUI, but everything goes smoothly on other devices (Samsung, Huawei, Pixel).
Open the Bluetooth settings on your phone. Make sure the wireless module is activated and visible to other devices. Press the Device Search button or wait for the automatic scan. The list of available gadgets will show a record of "Mi True Wireless EBs Basic" or "AirDots Pro 2".
Click on the device name. The system can request a pairing confirmation, agree with it. Once you successfully connect, you will hear a voice notification "Connected" in the headphones themselves. The status in the Bluetooth menu will change to "Connected" with the charge level of each earphone separately.
- 📱 Open "Settings" and go to the Bluetooth section.
- 🔍 Wait for the device to appear in the list of "Available devices".
- 👆 Click on the headset name to initiate the connection.
- ✅ Confirm the pairing request if it appears on the screen.
For MIUI 12 and above, a pop-up with animations is available when you open the case cover next to the unlocked phone. This is a Fast Pair feature that allows you to connect in one touch without going to the settings menu.
Compatibility with Apple devices (iOS)
iPhone owners can also comfortably use the model, although some features, such as charge animation pop-ups, may not be available without third-party apps.
Put your headphones in pairing mode by holding the button on the case as described earlier. Open the Settings → Bluetooth menu on your iPhone or iPad. Mi True Wireless EBs Basic should appear in the "Other Devices" list.
Tap the headset name. iOS will ask permission to pair — tap "Plug in." Once you set up the connection, the system will automatically determine the type of device and optimize the sound profile, and you can manage playback and calls through the standard Control Center interface.
⚠️ Note: On iOS, the charge level is displayed only in the Battery widget or in Control Point, but not in the status bar next to the Bluetooth icon.
Remember that the AAC codec supported by iOS provides high sound quality, but it does not require additional settings to activate it - the system itself will choose the optimal profile when connecting. Connection stability on iPhones is usually higher due to strict certification of accessories.
Use of the Xiaomi Earbuds app
To unlock the full potential of the headset, including equalizer setup, firmware updates and change control gestures, it is recommended to use specialized software. Xiaomi Earbuds app (formerly known as Mi True Wireless Earphones) is available on Google Play and App Store.
Install the app and launch it. Press the add-on button. The app asks you to turn on Bluetooth and bring the headphones closer to the phone. Once you detect the Xiaomi AirDots Pro 2, you can see detailed information about the battery status of each earphone and case.
The following settings are available inside the application:
- 🎛️ Choice of noise reduction mode (ANC): Transparency, Noise Reduction, Off.
- 🎚️ Equalizer setting: Bass, Vocals, Twitter or user profile.
- 👆 Reassignment of touches: choice of action for double or triple tap.
- 🔍 Search for headphones: the function helps to find the lost earphone by the sound signal.
☑️ Setup through the application
Special attention should be paid to the updates section. From time to time, new versions of software are released that improve the stability of the connection and the quality of the microphones. Firmware Update is better carried out with a charged case and phone, without interrupting the process.
Dual Device Connection (DDD)
One of the key features of the model is the ability to connect to two devices simultaneously, which allows you to watch video on a tablet, for example, and instantly take a call on your smartphone without manually switching.
To activate this mode, you first need to connect the headphones to the first device (Device A). Then turn off Bluetooth on Device A (without breaking the pair, just turn off the module). Put the headphones in pairing mode and connect them to the second device (Device B).
After successfully connecting to Device B, turn on Bluetooth on Device A. The headphones will automatically find the first device and restore the connection. Now Multi-point connection is activated. The Bluetooth list of both devices will display the status "Connected".
| Action. | Headphone Indication | Connection status |
|---|---|---|
| Connection to Device A | Voice "Connected" | Actively. |
| Search for Device B | White flashing | Waiting. |
| Connection to Device B | Voice "Connected" | Active (B), Waiting (A) |
| Inclusion of Device A | Short sound. | Active (A and B) |
When you call in on one device, the music on the other device is automatically paused, and this is implemented through the Hands-Free Profile (HFP) profile, which takes precedence over A2DP (audio stream), and after the conversation is over, playback will resume.
What if the second device doesn’t see the headphones?
Resetting and troubleshooting
In the process of operation, there may be situations when one earphone stops working, the sound is lost or the devices cannot see each other, in which case the solution is a complete reset before the factory settings.
Place both earbuds in the case. Make sure they charge (indicators are on). Press and hold the button on the case for 10-15 seconds. The indicator will start flashing, then go out and light up again, then start flashing white often. This means that the reset is done and the headphones are back in pairing mode.
After reset, delete the old headset entry from the phone's Bluetooth menu ("Forget the device") and pair again, as when you first turn on, which clears the internal error buffer and reconfigures the radio module.
⚠️ Warning: All user settings, including button assignments and noise reduction calibration, are lost after reset.
If the problem is quiet sound or cod, check the speaker grids for earwax or dust, clean them carefully with a dry soft brush, and make sure the phone settings do not activate "Absolute Volume," which may conflict with the volume adjustment on the headphones themselves.
💡
Full reset solves 90% of problems with left and right earphones or failures to connect.