How to connect wireless headphones to Xiaomi Redmi Note 10: instructions with photos and tips

Wireless headphones have become an integral part of everyday life – they are convenient for listening to music, talking on the phone and even watching videos. Xiaomi Redmi Note 10 owners often face questions: how to connect correctly TWS-Headphones (e.g. Redmi AirDots or Xiaomi Buds), what to do if the device does not find the headset, and how to adjust the sound for better quality. In this article, we will discuss all the nuances from basic pairing to solving typical problems.

The Redmi Note 10 supports modern Bluetooth 5.0 standards, which ensures stable connection to most wireless headphones. However, even with such a technique, there can be difficulties: for example, headphones connect to only one ear, sound is interrupted or there is no communication at all, we will explain in detail how to avoid these problems and what to do if they already appear.

Preparation for connection: what to check before pairing

Before you start connecting, make sure your headphones and phone are ready to go, which will save time and eliminate unnecessary manipulation.

First, check the headphones and the case. TWS-Headsets (including Redmi AirDots 3 or Xiaomi Buds 4) will not turn on if the charge level is below 5-10%. The indicator on the case usually shows the current status: flashing red is discharged, green or white is enough charge. If the headphones are discharged, place them in the case for 15-20 minutes.

Second, make sure your Redmi Note 10 has Bluetooth on.

• 📱 Swipe down from the top of the screen to open the notification bar.
• 🔵 Find the Bluetooth icon and make sure it's illuminated. If not, tap it.
• 🔄 If Bluetooth is not turned on, restart your phone (press the power button and select Reboot).

Also, remove old connections if you've used other headphones before, and this will prevent device conflicts. Go to Settings → Connected Devices → Bluetooth and remove unnecessary headsets by tapping the gear next to the name.

💡

If the headphones have previously connected to another phone, reset their settings. This usually requires holding the button on the case or the headphones themselves for 10-15 seconds until the indicator flashes red and white (see the instructions for your model).

Step-by-step: how to connect wireless headphones to the Redmi Note 10

The process of pairing headphones with Xiaomi Redmi Note 10 takes no more than a minute, if you follow the right sequence. TWS-Headphones (including models from Xiaomi, Sony, JBL other brands).

Step 1: Put your headphones in pairing mode, which usually requires:

• 🎧 Get your headphones out of the case (they should automatically turn on).
• 🔄 Hold the button on the case or touch panel on the headphones for 3-5 seconds until the indicator starts to flash quickly white / blue (search mode).
• 📡 Some models (e.g. Redmi AirDots 2) need to press the button on the case three times.

Step 2. Activate device search on your phone. Open Settings → Connected devices → Bluetooth and press Add New Device. The phone will start scanning.

Step. 3. Select your headphones from the list. When the name of your headset appears on the list (e.g. Redmi). AirDots_XXX or MI True Wireless, tap it. If you get a request for code confirmation (usually) 0000 or 1234), enter.

Headphones removed from the case and included|The indicator flashes white/blue|Bluetooth on the phone activated|Headphones are displayed in the list of available devices|Confirmed conjugation (if necessary, introduced) PIN-code)-->

Once you've successfully connected, you'll have Connected status on your device list, you can use your headphones to listen to music or make calls, and if you only have one headphone on, try rebooting the headset (put it in your case for 10 seconds and pull it out again).

Features of connecting headphones Xiaomi (AirDots, Buds, FlipBuds)

Xiaomi’s headphones often have unique features that make it easier to connect to the brand’s smartphones. For example, Redmi AirDots 3 Pro or Xiaomi Buds 4 support Fast Pair technology, which automatically opens the connection window when you first turn on.

If you have Xiaomi headphones, follow the following steps for optimal connectivity:

• 📦 Take the headphones out of the case and wait until a notification appears on the phone screen New device found (works only on the phone). MIUI 12 and newer).
• 🔗 Click Connect in the pop-up window – this will save time on manual search.
• 🎛️ Once connected, open the Mi Earphones app (available on Google Play) to set up equalizer, gestures and charge checker.

For Xiaomi FlipBuds Pro or Buds 3T models, dual connection (simultaneous connection to your phone and laptop) is available.

1. Connect the headphones to the first device (e.g., Redmi Note 10).
2. Open the Mi Earphones app and select Two-Point Connection.
3. Activate Bluetooth on the second device and connect the headphones in the standard way.

Problem Solving: Headphones are not connected or are not working properly

Even when paired correctly, there can be failures, and let's look at the most common problems and how to fix them.

Problem 1: The phone can't find the headphones.

• 🔋 Headphones are discharged – charge them for 10-15 minutes.
• 📡 Bluetooth is disabled or unstable – restart the module (turn off/on Bluetooth in the settings).
• 🔄 Headphones are not in pairing mode - reset them (hold the button on the case for 10-15 seconds).
• 📱 The phone is on the plane mode - turn it off in the notification panel.

Problem 2: The sound is only in one earpiece. TWS-- I'll give you a headset:

• 🔄 Reboot the headphones (put in the case for 10 seconds and take out).
• 🎧 Check if the speakers are contaminated (greatly wipe with a cotton swab).
• 📱 In Bluetooth settings, forget the device and connect again.
• 🔊 Make sure that the phone’s sound settings do not activate Mono mode (go to Settings). → Sound. → Sound quality).

Problem 3: Constant communication interruptions. If the sound is interrupted or the headphones are turned off, check:

• 📶 Telephone distance (not more than 10 meters without obstacles).
• 🔋 Headphone charge level (at low charge, the connection becomes unstable).
• 📱 Interference from other wireless devices (Wi-Fi routers, microwaves).
• 🔄 Phone firmware version (update) MIUI In Settings → The phone. → Updating the system).

Headphones are not in one headphone |Only in one headphone |Constant communication breaks |Another problem |No problems-->

Customization of sound: how to improve the quality of playback

Once connected successfully, you can optimize your sound to your preferences. Redmi Note 10 offers several built-in tools for this.

1. Equalizer and sound effects. Go to Settings → Sound → Sound Quality → Equalizer. Here you can choose from one of the preset profiles (Bases, Rock, Jazz) or create your own. For bass sound, increase sliders by 60 Hz and 250 Hz, for clear high ones, by 8 kHz and 16 kHz.

2. Customize through the Mi Earphones app. If you have Xiaomi headphones, install the official app from Google Play.

• 🎛️ Customize gestures (double touch for playback / pause, triple touch for calling voice assistant).
• 🔋 View the charge level of the case and each headphone separately.
• 🔊 Turn on Game Sound (reduces latency when watching video).
• 🎧 Activate Transparent Mode (missing surrounding sounds).

3. Optimization for calls. If headphones are used for conversations, check the microphone settings:

1. Open Settings → Connected devices → Headphones → Settings.
2. Enable the option to improve voice (reduce noise).
3. Choose the headphone microphone as your primary sound source for calls.

💡

For better sound, always update your headphone firmware through the Mi Earphones app. New versions of the software fix bugs and improve communication quality.

How to Disable or Remove Headphones from Your Phone

If you temporarily don’t use headphones or want to connect them to another device, you can turn them off or completely remove them from your phone’s memory.

Temporary shutdown:

• 📱 Swipe down the notification panel and tap the Bluetooth icon.
• 🔵 Or go to Settings. → Connected devices → Bluetooth and turn off the slider next to the headphone name.

Complete removal (forget device):

1. Open Settings → Connected devices → Bluetooth.
2. Find your headphones in the list and tap the gear (⚙️) near-name.
3. Select Forget the device and confirm the action.

⚠️ Note: If you remove the headphones from the list of devices, the next connection will require you to re-pair (search mode on the headset). This will not reset the settings of the headphones themselves (for example, gestures or equalizer in Mi Earphones will remain).

If the headphones don't want to reconnect after you've removed them, reset them.

• Put the headphones in the case.
• Hold the button on the case for 15-20 seconds until the indicator flashes red and white.
• Take out the headphones and repeat the pairing process.

Compatibility with other devices: can you connect headphones to a PC or other phone

Redmi AirDots and Others TWS-Xiaomi headphones support the standard Bluetooth protocol, so they can be connected not only to the Redmi Note 10, but also to other devices: laptops, tablets, TVs and even game consoles (for example, Nintendo Switch).

Connection to Windows PC:

1. Turn on Bluetooth on your computer (via Settings → Devices → Bluetooth).
2. Put the headphones in pairing mode (as described above).
3. In the list of available devices, select your headphones and click Connect.
4. If a driver is needed, the system usually installs it automatically.

Connection to MacBook:

• 🍎 Open System settings → Bluetooth.
• 🔍 Make sure the headphones are in search mode (the indicator flashes).
• 🖱️ Select the device from the list and click Connect.

Television connection:

Modern Smart TVs (such as Xiaomi Mi TV or Samsung QLED) also support Bluetooth.

1. Open the settings of the TV and find the section Sound → Sound output → Bluetooth.
2. Activate your device search and select your headphones.
3. Confirm the conjugation (if necessary, enter the PIN-code).

⚠️ Warning: When connecting to multiple devices at the same time (such as a phone and laptop), conflicts may occur, in which case, disconnect the headphones from one of the devices or use the dual connection function (if supported by your model).

FAQ: Answers to Frequent Questions