Connecting Xiaomi Vacuum Mop to Wi-Fi and Mi Home: full instructions with pictures

The new Xiaomi Vacuum Mop robot vacuum cleaner is bought, the box is unpacked, but how to connect it correctly to avoid errors? This guide will help even those who have never used Xiaomi smart technology. We will analyze the step-by-step connection to Wi-Fi, the setting in the Mi Home application, the first on and solving typical problems - from a flashing indicator to the error "Unable to connect to the network."

It is important to understand that the connection process may vary depending on the model (Vacuum Mop 2 Pro, Vacuum Mop Essential, Vacuum Mop, Vacuum Mop). P10 For example, Chinese devices may require a server change to Mi Home, and some models (like Vacuum Mop) T10+) Support only connectivity via Xiaomi Home, a new app replacing Mi Home in 2026.

In this article you will find:

• 🔌 Step-by-step instructions for connecting to Wi-Fi (from the photo stages)
• 📱 Setup in Mi Home/Xiaomi Home to different regions
• ⚡ First Start and Calibration – What to Do After Connecting
• ❌ Common errors and their solutions (error codes, flashing lamps)
• 🔄 Resetting – if the robot “forgot” the network or does not respond

If you've tried to connect your Xiaomi Vacuum Mop before, but it didn't work, skip the first two sections and go straight to the bug section, where we'll explain why the robot doesn't see Wi-Fi, it gives an error. E1-01 or permanently resets the connection.

Preparation for connection: what to do before switching on

Before you press the power button, check out the 4 key points that affect a successful connection:

• 📶 Wi-Fi network: the robot supports only 2.4 GHz. If you have a dual-band router (2.4 + 5 GHz, split networks or shut down 5 GHz at setup time. Xiaomi Vacuum Mop won't see the network if it only works in range 5 GHz.
• 🔋 Charging: Charge the robot for at least 4 hours before first activation, the indicator on the body should be green (full charge) or orange (partial.
• 📱 App: Download Mi Home (for older models) or Xiaomi Home (for newer ones released after 2023) and don't use clones like Mi Home Lite, because they don't support full functionality.
• 🌍 Region: If the robot is purchased in China, select China (Mainland) server in the application settings.

Pay special attention to the name of the Wi-Fi network. Xiaomi Vacuum Mop does not support:

⚠️ Attention: networks with Cyrillic alphabet, special symbols (for example, #, $,!) hidden SSID. If your network is called “My Network 123!”, rename it to “MyWiFi” for setup time".

Also check that the router has turned off client isolation mode (Client Isolation) – it blocks communication between devices on the same network, and the robot will not be able to connect to the application.

Wi-Fi connection: step-by-step instructions with pictures

Now, to the process itself, follow the instructions strictly by step, and if you skip one point, the robot can freeze during the connection phase.

Step 1: Robot activation

Press and hold the power button (🔄) on the case of Xiaomi Vacuum Mop for 3 seconds, until you hear the beep. the indicator should start flashing white (ready to connect) or orange (low charge - recharge before continuing).

Step 2: Start adding the device to Mi Home

1. Open the Mi Home or Xiaomi Home app.
2. Press. + (add) → Choose the Smart Home category.
3. In the list, find the Robot Vacuum Vacuum (or type in the Vacuum Mop search).
4. Choose your model. If it's not on the list, try another device. → Search QR-code (code is located on the bottom of the robot).

Step 3: Connecting the robot to the phone

The application will offer two connection options:

• 📶 Wi-Fi (recommended): Robot to create a temporary network Xiaomi_Vacuum_XXXX. Connect to it on your phone (no password required), then go back to the app and select your home network.
• 🔗 Through Bluetooth (if Wi-Fi doesn’t work): Turn on Bluetooth on your phone and follow the instructions in the app.

Once you have selected a network, enter your Wi-Fi password. Don't copy your password - enter manually to avoid hidden characters. If your password is longer than 20 characters, shorten it temporarily (the robot doesn't support passwords that are long). >32 characters).

Step 4: Completion of the connection

Wait for the robot's beep (one long beep) and the message in the "Connected" app (>5 minutes), restart the robot (hold the power button for 10 seconds) and repeat the steps.

Setup in the Mi app Home/Xiaomi Home

Once connected to Wi-Fi, the robot will appear on the list of devices, but to work properly, it must be configured.

1. Firmware update

Go to the robot card. → Settings (⚙️) → Firmware update. Don't ignore this -- outdated firmware can cause mapping or connection errors. It'll take 5 to 15 minutes to update. Don't turn the robot off during the process!

Calibration of sensors

Go to Settings. → Calibrate and follow the instructions on the screen. The robot will perform test movements to adjust:

• 🧲 Collision date (bumper)
• 👁️ Laser/optical sensor (for models with a LDS)
• 💧 Humidity sensor (for washing functions)

3. Mapping of the premises

Start the first cleaning in Full Cleaning mode, and the robot will build a map of the apartment, which can then be edited:

• 🏠 Divide into rooms (use the Zone tool in the app).
• 🚫 Add forbidden areas (such as near animal bowls).
• 🔄 Set up the order of cleaning rooms.

Scheduling adjustments

You can program automatic cleaning in the Schedule section.

⚠️ Note: if the schedule indicates the time when the robot is on base, it will not start cleaning until it is manually moved to the cleaning area. To automatically start from base, enable the Autostart option from the docking station (not available on all models).

💡

If your Xiaomi Vacuum Mop doesn’t save the card after turning it off, check the power saving settings in the app. Turn off the “Economic Mode” option – it resets the card to save charge.

First Start: What to Do After Connecting

Now the robot is ready to work, but before the first cleaning, perform a few important steps:

Verification of the configuration

Make sure all the details are in place:

• 🧹 Main brush (must rotate freely).
• 🧽 Water container (fill it only if you plan to wash the floor).
• 🔋 Docking station (connected to the socket, the indicator is on fire).
• 📄 Instructions (there may be) QR-quick-tuning).

2. Test run

Select Local Cleaning (1-2 m2) and observe the robot:

• 🔍 Check if he's clinging to carpets or rapids.
• 🎵 Make sure the alert sounds are working (for example, in a collision).
• 💦 If washing is included, check if the water is leaking.

3. Voice adjustment

In Settings → Voice alerts are available:

• 🔇 Turn off your voice (if it interferes with it).
• 🌐 Change the language (Russian, English, Chinese available).
• 📢 Turn up the volume.

4. Sensor inspection

If the robot is acting strangely (for example, does not see obstacles), wipe:

• 👁️ Laser sensor (for models with LDS) — dry-cloth.
• 📏 Infrared sensors (lower part of the housing).
• 🧲 Bumper - check if it is dusty.

💡

After the first cleaning, make sure to clean the robot: empty the garbage container, wash the water container and wipe the main brush, which will extend the life of the device by 30-50%.

Connection errors and their solutions

Even if you set it up properly, you can have problems, and we'll look at the most common errors and how to fix them.

1.The robot doesn't connect to Wi-Fi (flashes orange)

Possible causes and solutions:

• 📶 Wrong Wi-Fi range: check that the network is running at 2.4GHz. turn off 5GHz in router settings.
• 🔒 Strong password: Change your password to a simple one (e.g. 12345678) and try to connect again.
• 🌐 In Mi Home, select China server (for Chinese models) or Europe (for global models).
• 📱 Phone problems: Turn off VPN, Make sure the date and time on the phone are correct.

2. Mistake "E1-01" or "E2-02"

These codes mean sensor problems:

• E1-01: Solution: Turn off the robot, clean the hair/garbage brush, check its rotation.
• E2-02: Solution: remove the sidebrush, clear the axis of dust, set it back.

3.The robot has connected but is not responding to commands

Check it out.

• 📶 Internet connection: If Wi-Fi works but no network access, the robot won’t execute commands from the app.
• 🔄 Updates: go to the robot settings and check the relevance of the firmware.
• 📱 Application rights: in your phone settings, give Mi Home access to location and network.

4. The connection is permanently reset

If the robot is connected, it turns off:

⚠️ Attention: the problem may be in the router. Try: 1. Reboot the router. 2. Disable the Band Steering function (automatic switching between 2.4 and 5 GHz). 3. Assign the robot a static IP in the router settings (by MAC-address).

Resetting settings: if nothing helps

If the robot has stopped responding or has forgotten Wi-Fi, perform a hard reset. Attention: this will delete all settings, including room maps and schedules.

Method 1: through a button on the body

1. Turn off the robot (hold the power button for 3 seconds).
2. Press and hold the power buttons. + Home (or food) + Spot Cleaning If There Is No Home Button in 10 Seconds.
3. Release the buttons when you hear the beep (the robot will say "Reset" in English).

Method 2: Through the application

If the robot is connected to Mi Home, but is not working correctly:

1. Go to the device card. → Settings (⚙️).
2. Select Delete Device.
3. Confirm the removal and add the robot again (as in the first connection).

Once reset, the robot will return to factory settings.

• 🔌 Reconnect to Wi-Fi.
• 🗺️ Start a new calibration and map construction.
• ⚙️ Set up a schedule and cleaning areas.

Important: If the reset did not help, check:

• 🔋 Battery charge (should be) >30%).
• 📶 Wi-Fi stability (robots should not lose communication during reset).
• 📱 Application version (update Mi Home to the latest version).

Features of connection for different models

Not all Xiaomi Vacuum Mops are set up the same way, but here are the key differences for the popular models:

Xiaomi Vacuum Mop 2 Pro

Xiaomi Vacuum Mop Essential

Xiaomi Vacuum Mop P10

Xiaomi Vacuum Mop T10+

💡

If you bought the Xiaomi Vacuum Mop on AliExpress, it's probably the Chinese version. To connect it to Mi Home, select China (Mainland) and use a Chinese server. Without it, the robot won't update and may not work properly.

Frequent questions about connecting Xiaomi Vacuum Mop