How to use the robot vacuum cleaner Xiaomi Mijia T100: Complete guidance from connection to departure

Xiaomi Mijia T100

Mijia

Many users are struggling with the first switch on: how to sync the vacuum cleaner with the application, which cleaning modes to choose for different coatings, how to avoid typical errors in operation. This article will help you understand all the nuances from unpacking and preparation to fine-tuning and solving possible problems. We will also reveal the “hidden” functions that the manufacturer does not mention in the official instructions.

Feature of Mijia T100 — Unlike flagship models like the Xiaomi Robot Vacuum-Mop 2 Pro, it doesn't support automatic water change or self-cleaning, but it does provide accurate laser navigation. LDS, It's a real-time mapping machine that allows the vacuum cleaner to effectively navigate through obstacles and remember the layout of the apartment, but without the right calibration of sensors and the right adjustment of cleaning areas, even this system can not work properly.

In this article, you'll find not only basic instructions, but also practical tips for optimizing your device, such as how to set your cleaning schedule to suit your schedule, or why vacuum cleaners can get lost in large rooms. T100, Share your experience in the survey below!

Unpacking and preparation for the first launch

Before the first inclusion of Xiaomi Mijia T100 It's important to make sure that all the components are in place and the device is ready to go:

• 🤖 Mijia robot vacuum cleaner T100 main filter fitted and side brushes
• ⚡ Charging station (dock station) with a power supply unit
• 🔋 Battery (already installed inside the case)
• 🧹 Spare side brush and filter HEPA
• 📄 Short instructions in several languages (including Russian)
• 🔧 Tool for cleaning the main brush

First, check the vacuum cleaner for transport stickers or protective films, which must be removed, especially from sensors and charging contacts.

• 🔌 Integrity of the dock power cable (no cracks or bare wires).
• 🔄 Mobility of the wheels and the main brush - they should rotate freely, without jamming.
• 📡 Clean laser sensor (located under a rotating “turret”) – dust or film can distort the map of the room.

Before installing the docking station, take into account a few nuances:

⚠️ Note: The docking station should not be placed on long-pile carpets or in places where there is less than 1.5 m of free space on the sides and 0.5 m in front under the vacuum cleaner.

The best place for the station:

• 🪛 Smooth surface (tile, laminate, parquet).
• 🚪 Away from doors that can be closed automatically (e.g. in the hallway).
• 🔌 Near the socket, but so that the cable does not interfere with the movement of the vacuum cleaner.
• 🌡️ Far from heat sources (batteries, heaters) – this will prolong the battery life.

💡

If your apartment has thresholds over 2cm high, use a special transitional frame.Mijia T100 Overcome obstacles up to 20 mm, but higher can get stuck.

Connect to the Mi Home app and initial setup

Management of Xiaomi Mijia T100 It is carried out through the official Mi Home app (available for Android and iOS) to connect the vacuum cleaner:

1. Download and install the app from Google Play or the App Store.
2. Create a Xiaomi account or log in to an existing one (be sure to link a phone number to restore access).
3. Turn on the vacuum cleaner by pressing and holding the power button on the case for 3 seconds.
4. In the app, click «+» → «Add the device» → «Robot vacuum cleaner and choose the Mijia model T100.
5. Follow the instructions on the screen: the application will offer to connect to a temporary Wi-Fi network created by the vacuum cleaner.
6. After successful synchronization, select your 2.4GHz home Wi-Fi network (5GHz not supported!) and enter your password.

If the vacuum cleaner does not connect, check:

• 📶 The smartphone and vacuum cleaner are at a distance of no more than 2 meters from each other.
• 🔒 So that the name of the Wi-Fi network does not have Cyrillic symbols or spaces.
• 🔄 To turn off the router mode "Customer isolation" (it blocks the interaction of devices on the same network).

Once connected, the app will prompt you to update the firmware. Update to the latest version is mandatory - it corrects navigation errors and adds new cleaning modes (for example, Deep Cleaning for carpets). 5-10 minutes, don't interrupt him!

In the main settings of the application, it is recommended immediately:

• 🏠 Attach the vacuum cleaner to a specific room in the Mi Home system (e.g., "Living room»).
• 🔊 Disable voice alerts if they interfere (in the Settings menu) → Voice prompts»).
• 📡 Enable the “Improved Map” option for more detailed scanning of the room.

Install the last firmware|Set up a cleaning schedule|Check the operation of the obstacle sensors|Keep the backup card of the premises-->

The main cleaning regimes and their features

Xiaomi Mijia T100 It offers 4 basic cleaning modes, each optimized for different tasks, and can be selected through the app or via a button on the vacuum cleaner body (one tap, change mode).

For optimal results, combine modes depending on the coverage.

• 🛋️ For upholstered furniture (sofas, chairs) use the "Quiet" mode with a nozzle for slit cleaning.
• 🧶 On carpets, first walk in Turbo mode, then repeat cleaning in Balanced to collect the remaining dust.
• 🚪 In the hallway or kitchen, where there is a lot of garbage, immediately choose "Maximum».

An important nuance: in the Turbo and Maximum modes, the vacuum cleaner consumes the battery much faster. If the area of the room exceeds 80 m2, it is better to break the cleaning into zones or use a schedule with automatic return to the docking station for recharging.

Creating a room map and setting up cleaning areas

One of the key advantages of Mijia T100 It is a laser navigation system. LDS, It's a map that builds an accurate map of your home, but it's important to do the primary calibration to work properly:

1. Make sure there is enough light in the room (laser sensor doesn’t work well in the dark).
2. Remove from the floor small objects that may interfere with the scan (wires, toys, shoes).
3. Start cleaning in the "Balanced" mode - the vacuum cleaner will begin to bypass the perimeter.
4. Do not interfere with the process until the card is built to 100% (notification will appear in the app).

After creating the map, you can:

• 🗺️ Divide the room into zones (for example, “Kitchen”, “Bedroom”, “Corridor»).
• 🚫 Set forbidden areas where the vacuum cleaner should not enter (near flower pots, baby cots).
• 🔄 Set up a cleaning sequence (first living room, then bedroom).
• 📍 Add virtual walls to restrict access to certain areas.

For map editing:

1. Open the "Map" tab in the Mi Home app.
2. Click on the pencil icon ("Edit").
3. Use tools to divide rooms, add zones or forbidden areas.
4. Save the changes – the vacuum cleaner will remember the new settings.

⚠️ Attention: If you move the dock to another location, the vacuum cleaner will need to build the map again, and the map is reset after resetting the settings to the factory.

For large rooms (100 m²+) It is recommended to break the cleaning into several stages:

• 🕒 Set the schedule so that the vacuum cleaner 1-2 room-room.
• ⚡ Make sure the battery is at least 80% charged before cleaning.
• 🔄 Turn on the “Based Return Car” option so that the vacuum cleaner returns to recharge itself.

💡

The accuracy of the map depends on the number of furniture and obstacles. In empty spaces (for example, after repair), the vacuum cleaner can “lose” – in this case, help it by temporarily placing large objects (chairs, boxes) for landmarks.

Cleaning and replacing the vacuum cleaner: cleaning and replacing consumables

Lifetime of Xiaomi Mijia T100 The manufacturer recommends that you clean the entire area after each 5-7 cleaning cycles, and replacement of consumables - each 3-6 months (depending on the intensity of use).

What to clean and how often:

To replace consumables, buy only original components from Xiaomi:

• 🔄 Filter HEPA (articular ZSTYQ02ZM) — Change every 6 months.
• 🧹 Side brushes (article) ZSTYQ01ZM) — every 3-4 month.
• 🌀 Main brush (article) ZSTYQ03ZM) — every 6-12 months.

⚠️ Attention: Using non-original consumables can lead to loss of warranty and deterioration of cleaning quality, for example, cheap filters do not trap fine dust, which reduces the efficiency of cleaning. HEPA-filtering.

If the vacuum cleaner began to suck or make unusual sounds, check:

• 🔍 Clog in the duct – clear the tube connecting the container to the motor.
• 🔋 Wearing brushes – if the villi are worn by more than 50%, replace them.
• 🌀 Damage to the main brush - cracks or chips on the roller worsen garbage collection.

💡

To extend the life of the battery, discharge it to 10% once a month and charge it to 100%.

Typical problems and their solution

Even reliable devices like Xiaomi Mijia T100, They can get into trouble. Here are the most common problems and how to fix them:

The vacuum cleaner does not turn on or respond to the buttons:

• 🔌 Check if the dock is connected to the socket and if the power indicator is on.
• 🔋 Make sure the battery is charged (the indicator on the case should be green).
• 🔄 Try resetting: Hold the power button for 10 seconds until the beep sounds.

The vacuum cleaner does not build a map or "lost":

• 📡 Make sure the laser sensor is clean and not closed.
• 💡 Check the lighting in the room - in the dark LDS-sensor.
• 🗺️ Reset the card in the app ("Settings") → Reset the map) and let the vacuum cleaner calibrate again.

The vacuum cleaner does not return to the docking station:

• 📍 Check if the station has moved.
• 🚫 Make sure there are no obstacles around the station (at least 1 m of free space in front).
• 🔋 If the charge is less than 20%, the vacuum cleaner may not have time to return - run it closer to the station.

Weak suction:

• 🌀 Clean the main brush and dust container.
• 🔍 Check the filter. HEPA — If it's clogged, the power drops on 30-40%.
• 🔋 Make sure you choose the correct mode (in the "Silent" power is minimal).

If the problem is not solved, try resetting to factory:

1. Open the Mi Home app and select your vacuum cleaner.
2. Go to "Settings" → General. → Resetting settings».
3. Confirm the action - the device will restart.

⚠️ Warning: Resetting will delete all stored maps and schedules! After the procedure, you will have to reconnect the vacuum cleaner to Wi-Fi and configure cleaning areas.

Hidden functions and life hacks for experienced users

In addition to the basic features, Xiaomi Mijia T100 He hides some useful things that few people know about:

1. Voice control via Alice or Google Assistant:

• 🎤 Connect the vacuum cleaner to Yandex.Station or Google Home via the Mi Home app.
• 🗣️ Now you can say, "Alice, start cleaning the living room," or "OK Google, put the vacuum cleaner back on base».

Configuring the "invisible walls":

• 🧱 In the application, you can create virtual barriers that the vacuum cleaner will not cross (for example, near a Christmas tree or building materials).
• 📏 To do this, in the editing mode of the map, select the Virtual Wall tool and draw a line.

3. Cleaning according to your location:

• 📍 In the schedule settings, enable the option “Geolocation Cleaning».
• 🚗 The vacuum cleaner will start automatically when you leave the house (according to the data). GPS your smartphone).

Manual control as a remote control:

• 🎮 The Mi Home app has a Manual Control mode where you can guide the vacuum cleaner using a joystick on the screen.
• 🔍 Useful for cleaning in hard-to-reach places (for example, under the sofa).

5. Battery savings in standby mode:

• 🔋 In the vacuum cleaner settings, disable the option “Constant Wi-Fi connection».
• ⏳ This will increase the battery life at the dock from 30 to 90 days.

Another useful trick is to create several maps for different floors:

1. Move the dock to another floor.
2. Start cleaning - the vacuum cleaner will build a new map.
3. In the app, save it under a different name (for example, “2nd floor”).
4. You can now choose which card to download before cleaning.

💡

If you have several Xiaomi robot vacuum cleaners, you can configure their collaboration in the Mi Home app: one will clean the first floor, the other – the second.

FAQ: Answers to Frequent Questions