How to use the electric bidet Xiaomi Mijia MEO701: Complete instructions from installation to daily care

Xiaomi Mijia Electric Flusher Electric Bidet MEO701 — It is a modern solution for hygiene, combining technology and convenience. The Xiaomi device stands out from its peers thanks to its integration into the Mi Home ecosystem, the ability to remotely control through the app, and advanced features such as water heating, drying, and antibacterial coating. However, even such an intuitive device requires proper tuning and operation to unlock its full potential.

In this article, we will analyze step-by-step instructions for installation, network connection and application, as well as the nuances of daily use. We will pay special attention to hidden functions that often go unnoticed (for example, Eco mode or temperature setting for children), and typical errors that may cause the device to work improperly. MEO701 Or you are planning to buy - here you will find answers to all questions, from installation to troubleshooting.

Compilation and preparation for installation

Before you start installing, check what is in the box with Xiaomi Mijia MEO701 All components are present. Standard equipment includes:

• 📦 The main block of bidet with fastening elements
• 🔌 Power adapter (220V, European-fork)
• 💧 Flexible hose for connection to the water supply (length 1.5 m)
• 🔧 Set of gaskets and sealing rings
• 📄 Short instructions in Chinese/English
• 📱 QR-code for downloading the Mi Home app

If you don't have at least one element, you should go to the vendor, and you should pay attention to the quality of the sealing rings, they should be elastic, without cracks, and if the rings are dry or deformed, the risk of leakage after installation increases 3 times.

Also prepare tools that are not included in the kit, but you will need for installation:

• 🔨 The dilution key (to connect the hose)
• 📏 Roulette or ruler (for measurements)
• ✏️ Marker or pencil (for marking)
• 🧰 The cross-shaped screwdriver (for fastening the base)

⚠️ Warning: Do not use silicone-based sealant to seal threaded joints. It can damage the plastic parts of the hose and lead to leakage in 2-3 months.

2. Step-by-step bidet installation MEO701

Xiaomi Mijia Electric Flusher Installation MEO701 It's three steps: base attachment, tapping, and electricity. Let's take a look at each step in detail.

Base attachment to the toilet

Before you install, turn off the water supply to the toilet and flush the rest of the tank.

1. Remove the toilet seat (usually attached with two plastic bolts from the bottom).
2. Place a metal mounting plate from the kit on the seat mounting site, and it should fit tightly to the ceramics.
3. Secure the plate with bolts coming in the kit. Don't drag it over, it could cause cracks in the toilet.
4. Put a rubber pad on the plate (included) for depreciation.
5. Install the main bidet block and fix it with the help of latches.

If the toilet is non-standard, you may need an additional adapter (sold separately — MEO701 designed for toilets with an oval or round bowl.

Connection to the water supply

To connect the water:

1. Find a tee on a cold water pipe going to the toilet bowl. If you don't have one, install it (you'll need a movable key).
2. Attach a flexible hose from the kit to the tee. Use a sealing tape to seal the thread.
3. Connect the other end of the hose to the inlet hole on the bidet (marked with a blue ring).
4. Open the water tap and check the connections for leaks. If the water drips, pull the nuts with the key.

⚠️ Attention: The water pressure in the system should be at least 0.1 MPa and not more than 0.75 MPa. If the pressure is exceeded, the bidet safety valve is triggered, and the device turns off).

Connection to the power grid

Xiaomi Mijia MEO701 network 220V. The connection is performed in this order:

1. Insert the adapter plug into the socket. The socket should be grounded and not more than 1.5 m from the bidet.
2. Connect the other end of the cable to the connector on the back of the device.
3. Press the power button on the remote or bidet panel. When you first turn on, the device will sound and start a self-test (a lesson). ~30 seconds).

If the light on the panel flashes red after you've connected, it indicates that the temperature sensor is not working properly, and turn off the device and check if the water hose is tightly attached.

3. Set up via the Mi Home app

For full use MEO701 You need to connect it to the Mi Home app, and that allows you to manage a bidet from your phone, adjust your schedule, and update your firmware.

3.1. Wi-Fi connection

Download the Mi Home app (available for Android and iOS) and follow the steps:

1. Sign up or sign in to your Xiaomi account.
2. Click Add Add the device (+) → Household appliances → bide.
3. Choose the Mijia Electric Flusher model MEO701.
4. Hold the Wi-Fi button on the bidet remote for 5 seconds until the indicator starts flashing blue.
5. Enter your Wi-Fi network password (2.4GHz only!).

If the device is not connected:

• 🔄 Reboot the router.
• 📶 Check that the phone and bidet are on the same network.
• 🔌 Turn it off. VPN or a proxy on the phone.

3.2. Basic settings in the annex

After connecting in the application, the following options will be available:

In the Schedule section, you can program the automatic heating of the seat, for example, in the morning or evening, which is especially convenient for families with children or the elderly.

💡

If there are children in the house, activate the Children's Mode settings - this will limit the maximum water temperature to 34°C and shut down the intensive drying.

4. Bidet control: remote vs appendix

Xiaomi Mijia MEO701 It supports two different ways of controlling, the wireless remote (which comes with the box) and the mobile app, and we'll figure out when it's more convenient to use each of them.

Functions of the DU remote

The remote has 12 buttons divided into zones:

• 🔘 On/off – the main power button.
• 💦 Cleaning - front/rear wash (adjusted by the duration of pressing).
• 🌡️ Water temperature - increase / decrease by 1°C.
• 🪑 Seat heating - 3 levels (off/medium/maximum).
• 💨 Drying - start of the fan with temperature control.
• 🔄 Eco-mode - switching to energy-saving mode.

There's a hidden reset button on the back of the remote, a small hole, and if the bidet doesn't respond to commands, use the clip to press it, and it will reboot the device.

4.2. Advantages of management through Mi Home

The application offers enhanced features:

• 📱 Remote control – turn on the seat heating on the way to the toilet.
• 🕒 Timer – Programming automatic drying 5 minutes after use.
• 📊 Statistics - data on water and electricity consumption per day / week.
• 🔄 Software updates – installing new firmware with improvements.

But there's a limitation to the application: it only works with a stable Internet connection, and if Wi-Fi goes off, you can only manage the bidet from the remote.

💡

For maximum comfort, use the remote for quick commands (for example, turn on water), and the application for fine tuning (temperature, schedule).

5. Hidden functions and life hacks

Xiaomi Mijia MEO701 It has some non-obvious functions that are not written in the manual:

• 🧼 Self-cleaning of the nozzle: Hold the Cleaning button on the remote for 3 seconds - the nozzle will be washed with a disinfectant solution (if it is poured into the tank).
• 👶 Children's Mode: Activates in the app, limits water temperature and turns off strong jet.
• 🌙 Night mode: Dimmes the panel lighting and reduces the noise of the drying fan (included in Settings) → Regimes).
• 🔋 Energy saving: If the bidet is not used for 8 hours, it automatically turns off the heating (threshold can be changed).

Another life hack: if the bidet water gets colder than normal, check the filter on the inlet hose. It can clog with rust or sand.

1. Turn off the water and take off the hose.
2. Take out the filter (a small mesh) and rinse under running water.
3. Set it back up and check the pressure.

6. Care and maintenance

To Xiaomi Mijia MEO701 Have served a long time, follow the recommendations for care:

Cleaning and disinfection

Clean the bidet at least 1 time a week:

• 🧽 Wash the case with a wet cloth with a soft detergent (without abrasives!).
• 🚿 To clean the nozzle, use a special solution (for example, Xiaomi Mijia Cleaner) or diluted vinegar (1: 1 with water).
• 🧻 Do not use alcohol or acetone – they will damage the antibacterial coating.

For tank disinfection:

1. Pour into the tank 1 liter of water with 2 tablespoons of citric acid.
2. Start the self-cleaning mode (hold Cleaning for 3 seconds).
3. Repeat 2-3 times, then rinse with clean water.

Replacement of filters and consumables

V MEO701 There are two filters that need to be changed:

Replacement can be done on your own:

1. Turn off the water and the electricity.
2. Remove the back cover of the bidet (unscrew 2 screws).
3. Get out old filters and install new ones (you can buy from the official Xiaomi store).

⚠️ Warning: If the water is still rusting after the filter is replaced, the pipes are the problem.

Typical problems and their solution

Even a reliable device like the Xiaomi Mijia MEO701, It can cause problems. Let's look at the most common malfunctions and how to fix them.

If you have a problem after all the manipulations, contact Xiaomi Service Center. The device has a 12-month warranty, but it requires a check and a box to work.

💡

Most malfunctions MEO701 water-related: low pressure, blockages or leaks. Always start your diagnosis by checking the filter and connections!

8. Frequently Asked Questions (FAQ)

Important: If the bidet makes a loud noise when dialing water, this is a sign of air in the system. Open the cold water tap at full power for 1-2 minutes to blow air.