Xiaomi’s modern wireless headphones have become the standard of quality in the budget and mid-range segment, offering excellent noise reduction and stable sound. However, after being removed from the box or bought from hand, many users have a question: how to properly initiate the mating process if automatic connection does not happen.
In this article, we will take a look at the details of working with the Redmi AirDots Pro (also known as Mi True Wireless Earphones 2), learn about the intricacies of pairing activation, factory reset methods and how to solve typical Bluetooth connection problems. Properly executing instructions will avoid channel dissynchronization when sound is only in one ear.
The connection process may vary depending on your gadget’s operating system. Whether it’s Android, iOS or Windows, the basic principles of how Bluetooth protocol works remain the same, but device management interfaces have their own unique features that must be considered for successful integration.
Preparing headphones for the first use
Before you try to find a device on the list of available, you need to make sure that it works. Often the reason for the lack of a signal is a discharged battery inside the case or the headphones themselves. The indication on the case indicates the current status: if the LED does not light up when you open the lid, you should put the case on charge.
Lithium batteries could go into deep discharge during storage in the warehouse, so it is recommended to leave the case with the lid closed connected to the network for at least 30-60 minutes before the first attempt to turn on.
💡
If the indicator on the case flashes white while charging, it means that the charging process is underway. A constant white light signals full charge.
Once you've made sure you have power, open the charger case. Without removing your headphones, look at the LED light. If it's white, it means the system is ready to go. In some cases, especially after a long downtime, you may need to double-press the touch areas to activate.
Standard procedure for connecting to Android and iOS
The main method of activating the pairing mode on Xiaomi Airdots Pro is to use touch control. Unlike many other models, there is no physical button on the case case. To put the headphones in visibility mode for external devices, you need to perform a sequence of actions.
Remove both earbuds from the charge case. On the touchpad of either of them (left or right), double-task and hold your finger for about 5 seconds. You hear a voice message "Pairing" and the LED light will flash white often, which means that the Bluetooth module broadcasts the detection signal.
- 📱 Open Bluetooth settings on your smartphone.
- 🔍 Click “Search for Devices” or wait for a new gadget to appear in the list.
- 🎧 Select "Mi True Wireless EBs Basic 2" or "Redmi AirDots Pro».
- ✅ Confirm pairing if a request appears on the screen.
Once the connection is successful, the voice assistant will say "Connected." Now the music will be streamed in stereo mode. If you use a Xiaomi or Redmi smartphone with a MIUI shell, the process can go even faster thanks to a pop-up feature that automatically detects headphones next to the unlocked screen.
Features of connection to a computer and laptop
Connecting to a PC or laptop running Windows or macOS has its nuances. Computers often have less sensitive Bluetooth antennas compared to smartphones, so the distance between the device and the headphones should be minimal.
To start, put your headphones in pairing mode as described above (double long press). On your computer, go to the Settings menu → Devices → Bluetooth and Other Devices. Press the Add Bluetooth or Other Device button and select the first item in the list.
In the list of available devices, find the name of your headset. Note that once connected, your computer can use two profiles: Headset (for calls, low quality) and Stereo (for music, high quality). A2DP profile provides better sound, but may not work simultaneously with the microphone in some applications.
What to do if your computer can’t see the headphones?
Resetting and re-pairing
Sometimes, when the headphones stop syncing with each other (sound is only in one ear) or the phone sees them as two separate devices, you need a Hard Reset procedure, which will return factory settings and clear the memory of the paired devices.
To perform the reset, place both earbuds in a charge case and leave the lid open. Find the touch zones on both headphones at the same time. Press and hold them for about 20-30 seconds. The indicators should blink several times, then go out or change color, signaling a successful reset.
| Action. | Indication | The result |
|---|---|---|
| Single touch | No reaction/Sound | Pause/Reproduction |
| Double touch (5 seconds) | White flashing | Interconnection mode |
| Triple touch. | Voice menu | Calling the assistant |
| Retention (20+sec) | Blinking + quenching | Resetting settings |
After reset, delete the old headphone record in the phone's Bluetooth menu ("Forget the device") and reconnect as when you first use it, guaranteed to solve 90% of the software errors in communication.
Use of the Xiaomi Earbuds app
For advanced management of the functionality of Redmi AirDots Pro, it is recommended to use the official Xiaomi Earbuds app (or Mi True Wireless), it is available in Google Play and the App Store. The application allows you not only to track the charge of each headphone separately, but also to configure the equalizer.
You'll find gesture control settings in the app menu, you can reassign touch functions, like changing the action to triple touch, or adjust the reaction rate to double, and you can also find headphones that make them squeak loudly if you lose them in the apartment.
☑️ Checking the functionality in the annex
One of the key functions of the application is to update the firmware. Periodically, the manufacturer releases updates that improve connection stability and noise reduction quality. Firmware update is recommended to be carried out with a charged case, without interrupting the process so as not to damage the software.
Addressing common problems
Even with proper tuning, technical difficulties can arise: for example, a quiet sound or interruptions may not be due to a breakage, but to contamination of the speaker mesh with earwax or pollen. Regular cleaning with a dry soft brush helps restore normal volume.
⚠️ Warning: Do not use sharp objects or water to clean the speaker mesh.This can damage the membrane and lead to irreversible failure of the acoustic system.
If there is a desynchronization (one ear plays, the other is silent), try to put a silent earphone in the case, close the lid, then get it out and again perform a double long press to force entry into search mode, and then connect from the phone.
Charging problems are often solved by wiping contacts with an alcohol wipe. Contact oxidation is a common reason why the indicator doesn't light up. Make sure the USB-C cable is working and delivers sufficient current.
💡
The main reason for most connectivity problems is residual data about old pairings in the phone's memory. Always remove the device from the Bluetooth list before reconfiguring.